Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Gladkikh, I. Karnaukhov, and A. Mytsykov, “The Effect of the Superconducting Wiggler on the Dynamic Aperture ISI-800”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP073G, pp. 656-657.
[n] G. S. Mauro et al., “Numerical Simulation and Beam-Dynamics Study of a Hollow-Core Woodpile Coupler for Dielectric Laser Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2022-2025. doi:10.18429/JACoW-IPAC2021-TUPAB246
[n] E. Echeverria, A. Flint, C. Pennington, M. Andorf, J. Maxson, and A. Galdi, “First Steps Toward Molecular beam epitaxial growth of potassium antimonide photocathodes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2068-2071. doi:10.18429/JACoW-IPAC2024-WEPC47
[n] G. Torrisi et al., “Numerical Study of Photonic-Crystal-Based Dielectric Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3653-3656. doi:10.18429/JACoW-IPAC2019-THPGW033
[n] J. J. Garcia-Garrigos, C. Blanch Gutierrez, J. V. Civera, A. Faus-Golfe, and S. Doebert, “Beam Test Performance of the Beam Position Monitors for the TBL Line of the CTF3 at CERN”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC130, pp. 1326-1328.
[n] V. Maradia et al., “A Novel Beam Optics Concept to Maximize the Transmission Through Cyclotron-based Proton Therapy Gantries”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2477-2479. doi:10.18429/JACoW-IPAC2021-TUPAB407
[n] G. M??ller, “Microwave Properties of High-Tc Oxide Superconductors”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89D01, pp. XX-XX.
[n] M. Katoh, S. Sato, S. Suzuki, and T. Yamakawa, “Lattice Design of a Synchrotron Radiation Source at Tohoku University”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP065G, pp. 653-655.
[n] M. I. Demsky, V. V. Krotov, and D. E. Trifonov, “Beam Scanning System of Linear Accelerator for Radiation Processing”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC052, pp. 547-548.
[n] Y. Kim et al., “RF Noise Driven Dipole Mode Parametric Resonance”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH123, pp. 1954-1956.
[n] K. Kawa, T. Szumlak, C. Kokkinos, and F. Lackner, “High fidelity numerical modelling and condition monitoring applied to septum magnets at CERN”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3556-3559. doi:10.18429/JACoW-IPAC2024-THPR29
[n] E. J. Ericson, D. Bertwistle, M. J. Boland, M. Castillo Sosa, and D. Pelz, “Simulation and Analysis of Wake Fields and Trapped RF Modes in Insertion Device Vacuum Chambers at the Canadian Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 414-416. doi:10.18429/JACoW-IPAC2019-MOPGW128
[n] H. S. Uhm, “Theory of the Wakefield Effects of Relativistic Electron Beams”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1029-1032.
[n] D. Schulze, “Mechanical Instabilities of a Superconducting Helical Structure due to Radiation Pressure”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper D-11, pp. 359-370.
[n] W. F. Praeg, “An 80 kG-Foot Beam Switching Magnet and Its Pulsed Current Supply”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 871-873.
[n] A. Lazos, H. Kobayashi, T. Suwada, and T. Urano, “BPM Electronics for the B-Factory e+e- Linac at KEK”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-71, pp. 872-874.
[n] I. Syratchev and W. Bruns, “Time Domain Simulations of the CLIC PETS (Power Extraction and Transfer Structure) with GdfidL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH047, pp. 3780-3782.
[n] G. M. Liu, N. Yang, and N. Huang, “COLLECTIVE EFFECTS IN SSRF”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP050, pp. XX-XX.
[n] K. W. Shepard, K. R. Crandall, and W. L. Kennedy, “Construction of a Superconducting RFQ Structure”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1042-1045.
[n] C.-M. Kleffner, N. Holtkamp, M. Nagl, H. Poggensee, J. Peters, and A. Schempp, “Operation of the Upgraded H$$-Injection System of the Linac III at DESY”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4048, pp. 875-877.
[n] L. M. Ford, M. T. Heron, and R. J. Smith, “A High Precision Digitiser and Multiplexer for the New Orbit Processing Electronics at Daresbury”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1551-1554.
[n] L. A. Builta, R. L. Carlson, T. P. Hughes, T. J. Kauppila, D. C. Moir, and R. N. Ridlon, “Pulse-Power-Induced Oscillations on the REX Electron Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1559-1562.
[n] K. G. Antonyan, L. G. Hakopyan, E. M. Laziev, S. N. Movsesyan, and A. G. Oganessian, “Beam Position Monitor Based on Diffraction Radiation”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-92, pp. 926-928.
[n] P. J. Gollon and M. Awschalom, “Design of Penetrations in Hadron Shields”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 741-746.
[n] D. Schulze et al., “RF Control of Superconducting Helically Loaded Cavities”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G01, pp. 156-162.
[n] M. Volpi et al., “Radiation Shielding Design for the X-Band Laboratory for Radio-Frequency Test Facility - X-Lab - at the University of Melbourne”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 724-727. doi:10.18429/JACoW-IPAC2022-MOPOMS040
[n] A. F. Jacob, W. Barry, and G. R. Lambertson, “Higher Order Mode Damping in an ALS Test Cavity”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 928-931.
[n] L. Calabretta et al., “The Progress of the EXCYT Facility at INFN-LNS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B01, pp. 2597-2599.
[n] A. V. Apelfeld et al., “Application of the Particle Backscattering Method for the Certification of the Oxide Protective Coatings at the Surface of Al Alloys”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP51C, pp. 2422-2424.
[n] S. V. Ivanov, “Status of U-70”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 55-59. doi:10.18429/JACoW-RUPAC2018-WEXMH01
[n] K. Ziegler, “Operation of the VICKSI-Cyclotron with Tandem Injector”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-15, pp. 87-89.
[n] P. Faugeras, “THE LHC PROJECT: STATUS AND PROSPECTS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper MOD05, pp. XX-XX.
[n] B. Zhang, X. Li, S. Wang, and R. Yang, “Test of the large-diameter CNT wire for the high-intensity beam diagnostics”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM056, unpublished.
[n] S. V. Ivanov, “Accelerator Complex U70 of IHEP: Status and Upgrades”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEYCH01, pp. 85-89.
[n] H. Ma et al., “The Low-level Radio Frequency System for the Superconducting Cavities of National Synchrotron Light Source II”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP295, pp. 669-671.
[n] J. E. Vetter, R. Hietschold, K. Mittag, and B. Piosczyk, “Measurements on a Superconducting Helix”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper D-2, pp. 249-256.
[n] D. H. Ha et al., “E-field Measurement of 9.3 GHz RF cavity for 6 MeV LINAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4496-4498. doi:10.18429/JACoW-IPAC2018-THPMK084
[n] M. Awschalom and F. L. Larsen, “Radiation Measurement Work at the Princeton-Pennsylvania Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 708-712.
[n] E. A. Begloyan, E. D. Gazazian, V. G. Kocharian, and E. M. Laziev, “The Interaction of the Charged Particles Bunches and Waveguide-Cavity Structures”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-70, pp. 230-232.
[n] J. K. Burton, D. Conte, M. Friedman, T. O, and J. Shipman, “The Autoaccelerator - A Generator for Producing a High Energy Intense Relativistic Electron Beam by the Autoacceleration Process”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1628-1631.
[n] H. V. Walz and D. B. Gustavson, “Status of the SLAC SNOOP Diagnostic Module for FASTBUS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2276-2279.
[n] E. A. Begloyan, E. D. Gazazian, V. G. Kocharian, and E. M. Laziev, “The Cylindrical Cavity Geometry Optimization over the Maximum Longitudinal Component of Electric Field”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2123-2125.
[n] J. Bobnar et al., “TINE/ACOP state-of-the-art Video Controls at Petra III”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL028, pp. 82-84.
[n] O. B. Dzagurov and V. P. Petukhov, “Corona Triode without Anode Power Supply”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A05, pp. 791-793.
[n] N. A. Morozov et al., “IBA-JINR 400 MeV/u Superconducting Cyclotron for Hadron Therapy”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper FRM1CIO03, pp. 404-409.
[n] M. J. de Loos and S. B. van der Geer, “General Particle Tracer: A New 3D Code for Accelerator and Beamline Design”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP001G, pp. 1241-1243.
[n] Y. Baconnier, P. Faugeras, K. H. Kissler, W. Scandale, and B. de Raad, “Extractiion from the Cern SPS”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1434-1437.
[n] J. M. Schippers, “Accelerators for Medical Application: What Is So Special”, presented at the Cyclotrons'22, Beijing, China, Dec. 2022, paper THBO04, unpublished.
[n] S. Lee, D.-H. Kim, H.-S. Kim, H.-J. Kwon, and S.-P. Yun, “Transverse characterization of 1 MeV/n RFQ output beam at Komac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2342-2344. doi:10.18429/JACoW-IPAC2023-TUPM064
[n] N. C. Christofilos, “Collective Ion Accelerators at Very High Energy in a Static Magnetic Field”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1039-1043.
[n] D. Rifuggiato, L. Calabretta, V. A. Shchepunov, and A. I. Papash, “Axial Injection in the LNS Superconducting Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-15, pp. 646-649.
[n] G. P?Âplau, U. van Rienen, S. B. van der Geer, and M. J. de Loos, “A Fast 3D Multigrid Based Space-Charge Routine in the GPT Code”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI059, pp. 1658-1660.
[n] R. Kostin and C. Jing, “Generation of bunched beam for SRF industrial cryomodules”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR80, unpublished.
[n] A. Bonatto, R. Pakter, and F. B. Rizzato, “Nonlinear Propagation of Laser Pulses in Plasmas: a Comparison between Numerical and Analytical Solutions”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD033, pp. 4349-4351.
[n] M. Fradj, R. Christmann, M. Hartung, and P. Strehl, “A New Design of Profile Grid Electronics with High Performance”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-22, pp. 93-95.
[n] J. R. Delayen and W. L. Kennedy, “Design and Modeling of Superconducting RFQ Structures”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-31, pp. 692-694.
[n] A. Dick and P. Piot, “Modeling of the amplified optical stochastic cooling experiment at IOTA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2751-2754. doi:10.18429/JACoW-IPAC2023-WEPA043
[n] E.-S. Kim et al., “Limitation of Beam Current in the PLS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH121, pp. 1948-1950.
[n] J. A. Pasour, T. P. Hughes, and K. Thomason, “Development of the Collective Interaction Klystron (CIK)”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 109-112.
[n] E. D. Gazazian, V. G. Kocharian, G. G. Oksuzian, and A. D. Ter-Pogossian, “Toroidal Cavity as an Accelerator Module”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2125-2128.
[n] G. W. Saewert and T. G. Jurgens, “XWAKE 1.1: A New Impedance and Wake Field Software Package”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPB15, pp. 2303-2305.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Gladkikh, I. Karnaukhov, and A. Mytsykov, “The Effect of the Superconducting Wiggler on the Dynamic Aperture ISI-800”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP073G, pp. 656-657.
- G. S. Mauro et al., “Numerical Simulation and Beam-Dynamics Study of a Hollow-Core Woodpile Coupler for Dielectric Laser Accelerators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2022-2025.
- E. Echeverria, A. Flint, C. Pennington, M. Andorf, J. Maxson, and A. Galdi, “First Steps Toward Molecular beam epitaxial growth of potassium antimonide photocathodes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC47, pp. 2068-2071.
- G. Torrisi et al., “Numerical Study of Photonic-Crystal-Based Dielectric Accelerators”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3653-3656.
- J. J. Garcia-Garrigos, C. Blanch Gutierrez, J. V. Civera, A. Faus-Golfe, and S. Doebert, “Beam Test Performance of the Beam Position Monitors for the TBL Line of the CTF3 at CERN”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC130, pp. 1326-1328.
- V. Maradia et al., “A Novel Beam Optics Concept to Maximize the Transmission Through Cyclotron-based Proton Therapy Gantries”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2477-2479.
- G. M??ller, “Microwave Properties of High-Tc Oxide Superconductors”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89D01, pp. XX-XX.
- M. Katoh, S. Sato, S. Suzuki, and T. Yamakawa, “Lattice Design of a Synchrotron Radiation Source at Tohoku University”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP065G, pp. 653-655.
- M. I. Demsky, V. V. Krotov, and D. E. Trifonov, “Beam Scanning System of Linear Accelerator for Radiation Processing”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC052, pp. 547-548.
- Y. Kim et al., “RF Noise Driven Dipole Mode Parametric Resonance”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH123, pp. 1954-1956.
- K. Kawa, T. Szumlak, C. Kokkinos, and F. Lackner, “High fidelity numerical modelling and condition monitoring applied to septum magnets at CERN”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR29, pp. 3556-3559.
- E. J. Ericson, D. Bertwistle, M. J. Boland, M. Castillo Sosa, and D. Pelz, “Simulation and Analysis of Wake Fields and Trapped RF Modes in Insertion Device Vacuum Chambers at the Canadian Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 414-416.
- H. S. Uhm, “Theory of the Wakefield Effects of Relativistic Electron Beams”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1029-1032.
- D. Schulze, “Mechanical Instabilities of a Superconducting Helical Structure due to Radiation Pressure”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper D-11, pp. 359-370.
- W. F. Praeg, “An 80 kG-Foot Beam Switching Magnet and Its Pulsed Current Supply”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 871-873.
- A. Lazos, H. Kobayashi, T. Suwada, and T. Urano, “BPM Electronics for the B-Factory e+e- Linac at KEK”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-71, pp. 872-874.
- I. Syratchev and W. Bruns, “Time Domain Simulations of the CLIC PETS (Power Extraction and Transfer Structure) with GdfidL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH047, pp. 3780-3782.
- G. M. Liu, N. Yang, and N. Huang, “COLLECTIVE EFFECTS IN SSRF”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP050, pp. XX-XX.
- K. W. Shepard, K. R. Crandall, and W. L. Kennedy, “Construction of a Superconducting RFQ Structure”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1042-1045.
- C.-M. Kleffner, N. Holtkamp, M. Nagl, H. Poggensee, J. Peters, and A. Schempp, “Operation of the Upgraded H$$-Injection System of the Linac III at DESY”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4048, pp. 875-877.
- L. M. Ford, M. T. Heron, and R. J. Smith, “A High Precision Digitiser and Multiplexer for the New Orbit Processing Electronics at Daresbury”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1551-1554.
- L. A. Builta, R. L. Carlson, T. P. Hughes, T. J. Kauppila, D. C. Moir, and R. N. Ridlon, “Pulse-Power-Induced Oscillations on the REX Electron Beam”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1559-1562.
- K. G. Antonyan, L. G. Hakopyan, E. M. Laziev, S. N. Movsesyan, and A. G. Oganessian, “Beam Position Monitor Based on Diffraction Radiation”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-92, pp. 926-928.
- P. J. Gollon and M. Awschalom, “Design of Penetrations in Hadron Shields”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 741-746.
- D. Schulze et al., “RF Control of Superconducting Helically Loaded Cavities”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper G01, pp. 156-162.
- M. Volpi et al., “Radiation Shielding Design for the X-Band Laboratory for Radio-Frequency Test Facility - X-Lab - at the University of Melbourne”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 724-727.
- A. F. Jacob, W. Barry, and G. R. Lambertson, “Higher Order Mode Damping in an ALS Test Cavity”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 928-931.
- L. Calabretta et al., “The Progress of the EXCYT Facility at INFN-LNS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B01, pp. 2597-2599.
- A. V. Apelfeld et al., “Application of the Particle Backscattering Method for the Certification of the Oxide Protective Coatings at the Surface of Al Alloys”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP51C, pp. 2422-2424.
- S. V. Ivanov, “Status of U-70”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 55-59.
- K. Ziegler, “Operation of the VICKSI-Cyclotron with Tandem Injector”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-15, pp. 87-89.
- P. Faugeras, “THE LHC PROJECT: STATUS AND PROSPECTS”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper MOD05, pp. XX-XX.
- B. Zhang, X. Li, S. Wang, and R. Yang, “Test of the large-diameter CNT wire for the high-intensity beam diagnostics”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM056, this conference.
- S. V. Ivanov, “Accelerator Complex U70 of IHEP: Status and Upgrades”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEYCH01, pp. 85-89.
- H. Ma et al., “The Low-level Radio Frequency System for the Superconducting Cavities of National Synchrotron Light Source II”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP295, pp. 669-671.
- J. E. Vetter, R. Hietschold, K. Mittag, and B. Piosczyk, “Measurements on a Superconducting Helix”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper D-2, pp. 249-256.
- D. H. Ha et al., “E-field Measurement of 9.3 GHz RF cavity for 6 MeV LINAC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4496-4498.
- M. Awschalom and F. L. Larsen, “Radiation Measurement Work at the Princeton-Pennsylvania Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 708-712.
- E. A. Begloyan, E. D. Gazazian, V. G. Kocharian, and E. M. Laziev, “The Interaction of the Charged Particles Bunches and Waveguide-Cavity Structures”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-70, pp. 230-232.
- J. K. Burton, D. Conte, M. Friedman, T. O, and J. Shipman, “The Autoaccelerator - A Generator for Producing a High Energy Intense Relativistic Electron Beam by the Autoacceleration Process”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1628-1631.
- H. V. Walz and D. B. Gustavson, “Status of the SLAC SNOOP Diagnostic Module for FASTBUS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2276-2279.
- E. A. Begloyan, E. D. Gazazian, V. G. Kocharian, and E. M. Laziev, “The Cylindrical Cavity Geometry Optimization over the Maximum Longitudinal Component of Electric Field”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2123-2125.
- J. Bobnar et al., “TINE/ACOP state-of-the-art Video Controls at Petra III”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL028, pp. 82-84.
- O. B. Dzagurov and V. P. Petukhov, “Corona Triode without Anode Power Supply”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3A05, pp. 791-793.
- N. A. Morozov et al., “IBA-JINR 400 MeV/u Superconducting Cyclotron for Hadron Therapy”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper FRM1CIO03, pp. 404-409.
- M. J. de Loos and S. B. van der Geer, “General Particle Tracer: A New 3D Code for Accelerator and Beamline Design”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP001G, pp. 1241-1243.
- Y. Baconnier, P. Faugeras, K. H. Kissler, W. Scandale, and B. de Raad, “Extractiion from the Cern SPS”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1434-1437.
- J. M. Schippers, “Accelerators for Medical Application: What Is So Special”, presented at the 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THBO04, unpublished.
- S. Lee, D.-H. Kim, H.-S. Kim, H.-J. Kwon, and S.-P. Yun, “Transverse characterization of 1 MeV/n RFQ output beam at Komac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM064, pp. 2342-2344.
- N. C. Christofilos, “Collective Ion Accelerators at Very High Energy in a Static Magnetic Field”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1039-1043.
- D. Rifuggiato, L. Calabretta, V. A. Shchepunov, and A. I. Papash, “Axial Injection in the LNS Superconducting Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-15, pp. 646-649.
- G. P?Âplau, U. van Rienen, S. B. van der Geer, and M. J. de Loos, “A Fast 3D Multigrid Based Space-Charge Routine in the GPT Code”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI059, pp. 1658-1660.
- R. Kostin and C. Jing, “Generation of bunched beam for SRF industrial cryomodules”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR80, unpublished.
- A. Bonatto, R. Pakter, and F. B. Rizzato, “Nonlinear Propagation of Laser Pulses in Plasmas: a Comparison between Numerical and Analytical Solutions”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD033, pp. 4349-4351.
- M. Fradj, R. Christmann, M. Hartung, and P. Strehl, “A New Design of Profile Grid Electronics with High Performance”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-22, pp. 93-95.
- J. R. Delayen and W. L. Kennedy, “Design and Modeling of Superconducting RFQ Structures”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-31, pp. 692-694.
- A. Dick and P. Piot, “Modeling of the amplified optical stochastic cooling experiment at IOTA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA043, pp. 2751-2754.
- E.-S. Kim et al., “Limitation of Beam Current in the PLS Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH121, pp. 1948-1950.
- J. A. Pasour, T. P. Hughes, and K. Thomason, “Development of the Collective Interaction Klystron (CIK)”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 109-112.
- E. D. Gazazian, V. G. Kocharian, G. G. Oksuzian, and A. D. Ter-Pogossian, “Toroidal Cavity as an Accelerator Module”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2125-2128.
- G. W. Saewert and T. G. Jurgens, “XWAKE 1.1: A New Impedance and Wake Field Software Package”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPB15, pp. 2303-2305.
Back to search