Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. G. Beetham and J-B. Ribes, “GPS Precision Timing at CERN”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP46, pp. 765-767.
[n] S. U. De Silva, A. Castilla, and J. R. Delayen, “Compact Superconducting RF-dipole Cavity Designs for Deflecting and Crabbing Applications”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO080, pp. 2483-2485.
[n] X. Wu, H. Blosser, D. Johnson, F. Marti, and R. C. York, “The K500-to-K1200 Coupling Line for the Coupled Cyclotron Facility at the NSCL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA104, pp. 1318-1320.
[n] D. Anicic et al., “Replacement of Magnet Power Supplies, Control and Fieldbus for the PSI Cyclotron Accelerators”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP041, pp. XX-XX.
[n] P. M. Stefan, S. Krinsky, G. Rakowsky, and L. Solomon, “Small Gap Undulator Experiment on the NSLS X-Ray Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WXE04, pp. 2435-2437.
[n] R. Li, H. G. Chen, D. M. Li, S. L. Lu, T. J. Shen, and D. X. Wang, “Ramping Power Supplies for the SSRF Booster”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP123, pp. 3646-3648.
[n] Y.-H. Liu, J.-C. Chang, C. S. Chen, H. H. Chen, and J.-R. Chen, “Conductive EMI Reduction to Kicker Magnet Power Supply in NSRRC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD059, pp. 3647-3649.
[n] J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “Linac Efficiency and Beam Qualities in p, d, 32He and 42He Acceleration”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-10, pp. 37-42.
[n] P. Orel, E. Janezic, P. L. Lemut, S. Zorzut, S. Hunziker, and V. Schlott, “Test Results of the Libera Sync 3 CW Reference Clock Transfer System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1751-1753. doi:10.18429/JACoW-IPAC2014-TUPRI079
[n] M. Z. Zhang, B. C. Jiang, L. Ouyang, Q. L. Sun, and S. Q. Tian, “Study of a New Injection Scheme for the SSRF Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP054, pp. 685-687.
[n] Y. L. Yang et al., “Commissioning of the HLS Analog TFB System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP083, pp. 4150-4152.
[n] F. F. Wu et al., “Design and Calculation of the Stripline Beam Position Monitor for HLS II Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME041, pp. 562-564.
[n] J. C. Huang, J. Chen, C.-S. Hwang, F.-Y. Lin, and Y. T. Yu, “Heat Load Budget on TPS Undulator in Vacuum”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP077, pp. 741-743.
[n] T. J. Ma, P. Lu, B. G. Sun, Y. L. Yang, Z. R. Zhou, and J. Y. Zou, “BPM Data Processing Based on EPICS Soft IOC at HLS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR031, pp. 846-848.
[n] Y. Suetsugu, H. Fukuma, M. T. F. Pivi, K. Shibata, and L. Wang, “Beam Tests of a Clearing Electrode for Electron Cloud Mitigation at KEKB Positron Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEOAMH01, pp. 2369-2371.
[n] F. Zimmermann et al., “The Large Hadron-Electron Collider (LHeC) at the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR1PBC05, pp. 4233-4235.
[n] G. A. Krafft et al., “Measuring and Adjusting the Path Length at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WXE01, pp. 2429-2431.
[n] S. Ahmed et al., “Crab Crossing Schemes and Studies for Electron Ion Collider”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC047, pp. 2115-2117.
[n] J. C. Huang, C.-H. Chang, C.-S. Hwang, C. JunTune, and F.-Y. Lin, “Field Correction Results from NSRRC Elliptically Polarized Undulator 46”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC177, pp. 3317-3319.
[n] H. Fitze, M. Bopp, and H. Frei, “Development of a New High Power Cavity for the 590 MeV Ring Cyclotron at PSI”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP58, pp. 795-797.
[n] G. V. Dolbilov, G. I. Dolbilova, I. N. Ivanov, A. V. Mazhulin, and T. Ruskov, “Multi-Beam Electron Accelerator for Industrial Application”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6A14, pp. 2600-2602.
[n] J. F. DeFord, B. Held, and J. J. Petillo, “Adaptive Mesh Refinement for Particle-Tracking Calculation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS047, pp. 3600-3602.
[n] D. Gorelov, T. L. Grimm, S. U. De Silva, and J. R. Delayen, “Engineering of a Superconducting 400 MHz Crabbing Cavity for the LHC HiLumi Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC085, pp. 2411-2413.
[n] R. D. Ryne, “An Integrated Green Function Poisson Solver for Rectangular Waveguides”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC085, pp. 337-339.
[n] M. Schuett, U. Ratzinger, and M. Syha, “First RF Measurements of the 325 MHz Ladder RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 826-829. doi:10.18429/JACoW-LINAC2018-THPO060
[n] Y. Minagawa, T. Fujita, T. Ieiri, T. Kasuga, and T. Obina, “Transverse Sawtooth Instability Observed in Photon Factory Advanced Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB029, pp. 3080-3082.
[n] D. Welsh et al., “Planned Beam Transport and Two-Cavity Amplifier Experiments on the University of Maryland Gyroklystron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 144-147.
[n] L. Palumbo and C. Vaccarezza, “The SPARX-FEL Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE022, pp. 2185-2187.
[n] P. Snopok and G. G. Hanson, “6D Cooling Simulations for the Muon Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP035, pp. 4381-4383.
[n] A. D. Ringwall and C. M. Combs, “Superconducting Super Collider Laboratory SSCL RFQ to DTL Input Matching Section”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-67, pp. 235-237.
[n] T. Koseki, “Status of J-PARC Main Ring Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUODKI01, pp. 736-738.
For LaTeX
Use Complete Form
For BibTeX
References
- C. G. Beetham and J-B. Ribes, “GPS Precision Timing at CERN”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP46, pp. 765-767.
- S. U. De Silva, A. Castilla, and J. R. Delayen, “Compact Superconducting RF-dipole Cavity Designs for Deflecting and Crabbing Applications”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO080, pp. 2483-2485.
- X. Wu, H. Blosser, D. Johnson, F. Marti, and R. C. York, “The K500-to-K1200 Coupling Line for the Coupled Cyclotron Facility at the NSCL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA104, pp. 1318-1320.
- D. Anicic et al., “Replacement of Magnet Power Supplies, Control and Fieldbus for the PSI Cyclotron Accelerators”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP041, pp. XX-XX.
- P. M. Stefan, S. Krinsky, G. Rakowsky, and L. Solomon, “Small Gap Undulator Experiment on the NSLS X-Ray Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WXE04, pp. 2435-2437.
- R. Li, H. G. Chen, D. M. Li, S. L. Lu, T. J. Shen, and D. X. Wang, “Ramping Power Supplies for the SSRF Booster”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP123, pp. 3646-3648.
- Y.-H. Liu, J.-C. Chang, C. S. Chen, H. H. Chen, and J.-R. Chen, “Conductive EMI Reduction to Kicker Magnet Power Supply in NSRRC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD059, pp. 3647-3649.
- J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “Linac Efficiency and Beam Qualities in p, d, 32He and 42He Acceleration”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S1-10, pp. 37-42.
- P. Orel, E. Janezic, P. L. Lemut, S. Zorzut, S. Hunziker, and V. Schlott, “Test Results of the Libera Sync 3 CW Reference Clock Transfer System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1751-1753.
- M. Z. Zhang, B. C. Jiang, L. Ouyang, Q. L. Sun, and S. Q. Tian, “Study of a New Injection Scheme for the SSRF Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP054, pp. 685-687.
- Y. L. Yang et al., “Commissioning of the HLS Analog TFB System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP083, pp. 4150-4152.
- F. F. Wu et al., “Design and Calculation of the Stripline Beam Position Monitor for HLS II Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME041, pp. 562-564.
- J. C. Huang, J. Chen, C.-S. Hwang, F.-Y. Lin, and Y. T. Yu, “Heat Load Budget on TPS Undulator in Vacuum”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP077, pp. 741-743.
- T. J. Ma, P. Lu, B. G. Sun, Y. L. Yang, Z. R. Zhou, and J. Y. Zou, “BPM Data Processing Based on EPICS Soft IOC at HLS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR031, pp. 846-848.
- Y. Suetsugu, H. Fukuma, M. T. F. Pivi, K. Shibata, and L. Wang, “Beam Tests of a Clearing Electrode for Electron Cloud Mitigation at KEKB Positron Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEOAMH01, pp. 2369-2371.
- F. Zimmermann et al., “The Large Hadron-Electron Collider (LHeC) at the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR1PBC05, pp. 4233-4235.
- G. A. Krafft et al., “Measuring and Adjusting the Path Length at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WXE01, pp. 2429-2431.
- S. Ahmed et al., “Crab Crossing Schemes and Studies for Electron Ion Collider”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC047, pp. 2115-2117.
- J. C. Huang, C.-H. Chang, C.-S. Hwang, C. JunTune, and F.-Y. Lin, “Field Correction Results from NSRRC Elliptically Polarized Undulator 46”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC177, pp. 3317-3319.
- H. Fitze, M. Bopp, and H. Frei, “Development of a New High Power Cavity for the 590 MeV Ring Cyclotron at PSI”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP58, pp. 795-797.
- G. V. Dolbilov, G. I. Dolbilova, I. N. Ivanov, A. V. Mazhulin, and T. Ruskov, “Multi-Beam Electron Accelerator for Industrial Application”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6A14, pp. 2600-2602.
- J. F. DeFord, B. Held, and J. J. Petillo, “Adaptive Mesh Refinement for Particle-Tracking Calculation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS047, pp. 3600-3602.
- D. Gorelov, T. L. Grimm, S. U. De Silva, and J. R. Delayen, “Engineering of a Superconducting 400 MHz Crabbing Cavity for the LHC HiLumi Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC085, pp. 2411-2413.
- R. D. Ryne, “An Integrated Green Function Poisson Solver for Rectangular Waveguides”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC085, pp. 337-339.
- M. Schuett, U. Ratzinger, and M. Syha, “First RF Measurements of the 325 MHz Ladder RFQ”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 826-829.
- Y. Minagawa, T. Fujita, T. Ieiri, T. Kasuga, and T. Obina, “Transverse Sawtooth Instability Observed in Photon Factory Advanced Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB029, pp. 3080-3082.
- D. Welsh et al., “Planned Beam Transport and Two-Cavity Amplifier Experiments on the University of Maryland Gyroklystron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 144-147.
- L. Palumbo and C. Vaccarezza, “The SPARX-FEL Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE022, pp. 2185-2187.
- P. Snopok and G. G. Hanson, “6D Cooling Simulations for the Muon Collider”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP035, pp. 4381-4383.
- A. D. Ringwall and C. M. Combs, “Superconducting Super Collider Laboratory SSCL RFQ to DTL Input Matching Section”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-67, pp. 235-237.
- T. Koseki, “Status of J-PARC Main Ring Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUODKI01, pp. 736-738.
Back to search