Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. A. McIntosh, “RF Cavity Computer Design Codes”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC19, pp. 2353-2355.
[n] L. X. Lin and T. W. Wysokinski, “CLSI BMIT's Super-Conducting Wiggler Cryogenic Safety Improvements”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 209-212. doi:10.18429/JACoW-MEDSI2016-TUPE21
[n] H. Sun, X. Wang, L. Zeng, and W. Zhang, “Isolated attosecond pulses generation with the microbunching synthesis”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB107, unpublished.
[n] U. Trinks et al., “The Superconducting Separated Orbit Cyclotron Tritron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2721-2724.
[n] E. Bozoki and S. Kramer, “Ion Shaking in the 200 MeV XLS-Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 789-792.
[n] N. S. Dikansky, A. V. Novokhatski, V. V. Parkhomchuk, Yu. M. Shatunov, and A. N. Skrinsky, “Status of the VEPP-5 Complex”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 482-485.
[n] S. Peggs, “RHIC Progress Report”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOY02A, pp. 13-17.
[n] S. Khan, “Simulation of Longitudinal Coupled-Bunch Instabilities in BESSY-II”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP15G, pp. 966-968.
[n] E. Bjorklund, “The LANSCE Timing System Upgrade”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA05, pp. 325-327.
[n] M. A. Palmer et al., “Design and Operation of a Radiative Bhabha Luminosity Monitor for CESR-c”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT062, pp. 3564-3566.
[n] V. Pirozhenko et al., “Compact Electron Linacs for Radiation Technology Systems”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH031, pp. 2515-2517.
[n] G. V. Eremeev and D. C. Iriks, “Automatic Surface Defect Detection and Sizing for Superconducting Radio Frequency Cavity Using Haar Cascades”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB082, pp. 788-790.
[n] R. L. Cady, “The LAMPF 805 MHz RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2946-2949.
[n] A. Gurinovich and V. G. Baryshevsky, “Electrodynamical Properties of a Volume Free Electron Laser with a ''Grid'' Resonator”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH013, pp. 335-338.
[n] R. L. Fulton, “Mechanical Design of the LAMPF Low Energy Pion Channel”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1027-1029.
[n] B. S. Ishkhanov, N. I. Pakhomov, N. V. Shvedunov, V. I. Shvedunov, and V. P. Gorbachev, “CONCEPTUAL DESIGN OF THE MINIATURE ELECTRON ACCELERATOR DEDICATED TO IORT”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUJP15, pp. XX-XX.
[n] B. I. Bondarev, “Study of Space Charge-Dominated Beam Bunching”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP60, pp. 210-212.
[n] F. Zimmermann, R. Helm, and J. Irwin, “Optimization of the NLC Final Focus System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC07, pp. 710-712.
[n] R. Li, C. L. Bohn, and J. J. Bisognano, “Shielding Transient Self-Interaction of a Bunch Entering a Circle from a Straight Path”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V023, pp. 1641-1643.
[n] L. Thorndahl and G. Carron, “RF Hardware Development Work for the CLIC Drive Beam”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1066-1069.
[n] K. Kaspar and U. Ratzinger, “Design of the GSI 36 MHz RFQ Accelerator on the Base of Mafia Calculations”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP029L, pp. 1973-1975.
[n] F. F. Hall, “Quick Approximations for the HE3 Points of State”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 122-125.
[n] D. A. Malyutin, A. A. Starostenko, and D. Bolkhovityanov, “Use of a Three-Layer Control System for Non-Destructive Beam Probe Monitor”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA15, pp. 345-347.
[n] Christine Petit-Jean-Genaz, “Status Report for the RHIC Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAT002, pp. XX-XX.
[n] M. Reiser, “The University of Maryland Electron Ring Accelerator Concept”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 460-466.
[n] E. B. Blum and J. L. Rothman, “Self Triggered Single Pulse Beam Position Monitor”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2307-2310.
[n] W. J. Leonhardt, “A Radiation Hard Dipole Magnet Coils Using Aluminum Clad Copper Conductors”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 366-369.
For LaTeX
Use Complete Form
For BibTeX
References
- P. A. McIntosh, “RF Cavity Computer Design Codes”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC19, pp. 2353-2355.
- L. X. Lin and T. W. Wysokinski, “CLSI BMIT's Super-Conducting Wiggler Cryogenic Safety Improvements”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 209-212.
- H. Sun, X. Wang, L. Zeng, and W. Zhang, “Isolated attosecond pulses generation with the microbunching synthesis”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB107, this conference.
- U. Trinks et al., “The Superconducting Separated Orbit Cyclotron Tritron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2721-2724.
- E. Bozoki and S. Kramer, “Ion Shaking in the 200 MeV XLS-Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 789-792.
- N. S. Dikansky, A. V. Novokhatski, V. V. Parkhomchuk, Yu. M. Shatunov, and A. N. Skrinsky, “Status of the VEPP-5 Complex”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 482-485.
- S. Peggs, “RHIC Progress Report”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOY02A, pp. 13-17.
- S. Khan, “Simulation of Longitudinal Coupled-Bunch Instabilities in BESSY-II”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP15G, pp. 966-968.
- E. Bjorklund, “The LANSCE Timing System Upgrade”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA05, pp. 325-327.
- M. A. Palmer et al., “Design and Operation of a Radiative Bhabha Luminosity Monitor for CESR-c”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT062, pp. 3564-3566.
- V. Pirozhenko et al., “Compact Electron Linacs for Radiation Technology Systems”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH031, pp. 2515-2517.
- G. V. Eremeev and D. C. Iriks, “Automatic Surface Defect Detection and Sizing for Superconducting Radio Frequency Cavity Using Haar Cascades”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB082, pp. 788-790.
- R. L. Cady, “The LAMPF 805 MHz RF System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2946-2949.
- A. Gurinovich and V. G. Baryshevsky, “Electrodynamical Properties of a Volume Free Electron Laser with a ''Grid'' Resonator”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH013, pp. 335-338.
- R. L. Fulton, “Mechanical Design of the LAMPF Low Energy Pion Channel”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 1027-1029.
- B. S. Ishkhanov, N. I. Pakhomov, N. V. Shvedunov, V. I. Shvedunov, and V. P. Gorbachev, “CONCEPTUAL DESIGN OF THE MINIATURE ELECTRON ACCELERATOR DEDICATED TO IORT”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUJP15, pp. XX-XX.
- B. I. Bondarev, “Study of Space Charge-Dominated Beam Bunching”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP60, pp. 210-212.
- F. Zimmermann, R. Helm, and J. Irwin, “Optimization of the NLC Final Focus System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC07, pp. 710-712.
- R. Li, C. L. Bohn, and J. J. Bisognano, “Shielding Transient Self-Interaction of a Bunch Entering a Circle from a Straight Path”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V023, pp. 1641-1643.
- L. Thorndahl and G. Carron, “RF Hardware Development Work for the CLIC Drive Beam”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1066-1069.
- K. Kaspar and U. Ratzinger, “Design of the GSI 36 MHz RFQ Accelerator on the Base of Mafia Calculations”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP029L, pp. 1973-1975.
- F. F. Hall, “Quick Approximations for the HE3 Points of State”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 122-125.
- D. A. Malyutin, A. A. Starostenko, and D. Bolkhovityanov, “Use of a Three-Layer Control System for Non-Destructive Beam Probe Monitor”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA15, pp. 345-347.
- Christine Petit-Jean-Genaz, “Status Report for the RHIC Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAT002, pp. XX-XX.
- M. Reiser, “The University of Maryland Electron Ring Accelerator Concept”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 460-466.
- E. B. Blum and J. L. Rothman, “Self Triggered Single Pulse Beam Position Monitor”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2307-2310.
- W. J. Leonhardt, “A Radiation Hard Dipole Magnet Coils Using Aluminum Clad Copper Conductors”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 366-369.
Back to search