Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. H. Xu, Z. H. Sun, D. V. Campen, W. J. Corbett, C. L. Li, and W. J. Zhang, “Time Response of a Gridded X-ray Beam Ionization Chamber”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4220-4222. doi:10.18429/JACoW-IPAC2016-THPOY050
[n] W. Fischer, M. Blaskiewicz, P. H. Pile, and W. W. MacKay, “Target and Orbit Feedback Simulations of a muSR Beamline at BNL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2353-2356. doi:10.18429/JACoW-IPAC2015-TUPWI047
[n] T. Perron, G. A. Naylor, E. Plouviez, and B. K. Scheidt, “Test of New Diagnostics for Bunch Length Measurement”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT024, pp. XX-XX.
[n] G. Valentino et al., “A Tool Based on the BPM-interpolated Orbit for Speeding up LHC Collimator Alignment”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP246, pp. 162-165.
[n] M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “Interleaved Wide and Narrow Pulses for the KAON Factory 1 MHz Chopper”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1181-1184.
[n] M. Bossard, N. Eddy, O. Mohsen, R. Ainsworth, and Y.-K. Kim, “Measurement of stability diagrams in the IOTA ring at Fermilab”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2604-2607. doi:10.18429/JACoW-IPAC2024-WEPR48
[n] K. M. Thompson, S. Kim, R. Lari, and L. R. Turner, “Quadrupole Magnet for the APS Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 396-399.
[n] J. R. Rees, “A Proposal for Varying the Frequency of a Fixed-Frequency Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59C09, pp. 179-180.
[n] G. C. Pappas et al., “Fast Kicker Systems for ALS-U”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 564-566. doi:10.18429/JACoW-IPAC2014-MOPME083
[n] M. J. Alguard, B. L. Berman, S. D. Bloom, S. Datz, R. H. Pantell, and R. L. Swent, “Channeling Radiation from Positrons”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3865-3868.
[n] A. G. Golovkina, I. V. Kudinovich, D. A. Ovsyannikov, and Y. A. Svistunov, “The Problems of Accelerator-Driver Design for ADS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 486-489. doi:10.18429/JACoW-RUPAC2016-WEPSB055
[n] C. L. Li, W. J. Zhang, W. J. Corbett, and Y. H. Xu, “Polarization Measurement and Modeling of Visible Synchrotron Radiation at Spear3”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 240-243. doi:10.18429/JACoW-IBIC2016-MOPG71
[n] S. V. Kuzikov, M. E. Plotkin, A. A. Vikharev, J. L. Hirshfield, T. C. Marshall, and G. V. Sotnikov, “Short-Period RF Undulator for a Nanometer SASE Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC169, pp. 3293-3295.
[n] M. J. Browman, “Using the Panofsky-Wenzel Theorem in the Analysis of Radio-Frequency Deflectors”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 800-803.
[n] T. Nakagawa, Y. Higurashi, J. Ohnishi, T. Aihara, and M. Tamura, “Status of RIKEN SC-ECRIS”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOAK03, pp. 8-10.
[n] V. Wu, C. M. Bhat, and J. A. MacLachlan, “Simulations of an Acceleration Scheme for Producing High Intensity and Low Emittance Antiproton Beam for Fermilab Collider Operation”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP031, pp. 2164-2166.
[n] J.-H. Jang et al., “Initial beam commissioning results of RAON linac”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEBD1, unpublished.
[n] M. J. Rhee and R. F. Schneider, “Compact Pulsed Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3192-3195.
[n] M. M. Maggiore, A. M. Porcellato, and S. Stark, “Study of the RFQ Beam Cooler for SPES project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD026, pp. 1467-1469.
[n] N. V. Vasiliev, A. A. Glazov, V. A. Kochkin, D. L. Novikov, and E. N. Zaplatin, “Prototype of the Accelerating Resonator for the Superconducting Sector Deuteron Cyclotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1017-1020.
[n] J. Bergl et al., “Embedded Controllers, Field Bus and a Modular IO Concept: Central Elements of BESSY II Controls”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P022, pp. 2493-2495.
[n] R. J. Sachtschale, C. Dickey, and P. Morcombe, “A Novel Technique for Pulsing Magnet Strings with a Single Switch”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1339-1342.
[n] W. R. Smythe, “Reducing Ferrite Tuner Power Loss by Bias Field Rotation”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2173-2176.
[n] I. Kalagin, G. Gulbekian, and I. Ivanenko, “The Experimental Investigation of the Beam Transportation Efficiency through the Axial Injection System of the U400 Cyclotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH150, pp. 1568-1570.
[n] M. J. Browman and L. M. Young, “Coupled Radio-Frequency Quadrupoles as Compensated Structures”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO411, pp. 70-72.
[n] Y.-M. Wang, S.-I. Kwon, A. H. Regan, and T. S. Rohlev, “System Identification of the Linac RF System Using a Wavelet Method and Its Applications in the SNS LLRF Control System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH301, pp. 1613-1615.
[n] W. D. Stem, Y.-J. Chen, and J. Ellsworth, “Mitigation of Nonlinear Phase Space in a Space-Charge-Limited Injector Diode”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 905-908. doi:10.18429/JACoW-NAPAC2019-WEPLE09
[n] F. M. Mirapeix, J. A??el, J. Amores, J. Presa, and A. Urzainki, “High Precision Manufacturing for LINAC's”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP077, pp. 603-606.
[n] E. V. Pickulin, V. N. Malyshev, S. A. Silaev and Y. A. Svistunov, “Modelling of Accelerating Structures with Finite-difference Time-domain Method”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT110, pp. 2742-2744.
[n] R. Booth, H. H. Barschall, and E. Goldberg, “Rotating Target for Intense 14-MeV Neutron Source”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 472-475.
[n] O. Grimm, C. Behrens, J. Rossbach, and B. Schmidt, “Longitudinal Beam Diagnostics Application of Synchrotron Radiation at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC031, pp. 1116-1118.
[n] G. D. Wait, M. J. Barnes, D. Bishop, C. B. Figley, and G. Waters, “Prototype Studies of a 1 MHz Chopper for the KOAN Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 964-967.
[n] T. J. Shea, J. Mead, P. Cerniglia, and C. Degen, “Evaluation of IEEE 1394 Serial Bus for Distributed Data Acquisition”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P025, pp. 2502-2504.
[n] V. Ptitsyn, C. Montag, and S. Tepikian, “Electron Polarization in the eRHIC Ring-Ring Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3403-3405. doi:10.18429/JACoW-IPAC2016-THPMR010
[n] L. O. Dallin, D. Bodnarchuk, and T. Summers, “Optimizing Beam Brightness at the Canadian Light Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN005, pp. 920-922.
[n] V. Chouhan et al., “Transfer of EP and doping technology for PIP-II HB650 cavities from Fermilab to industry”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 685-688. doi:10.18429/JACoW-LINAC2024-THPB026
[n] V. Chouhan et al., “Excellent performance of 650 MHz single-cell niobium cavity after electropolishing”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 692-694. doi:10.18429/JACoW-LINAC2024-THPB028
[n] G. E. Danby and J. W. Jackson, “Static and Dynamic Magnetic End Effects and Correction Magnets for the AGS Booster”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 381-384.
[n] T. Wlostowski, G. Daniluk, M. M. Lipinski, J. Serrano, and F. Vaga, “Trigger and RF Distribution Using White Rabbit”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 619-623. doi:10.18429/JACoW-ICALEPCS2015-WEC3O01
[n] J. Borburgh, M. Hourican, and M. Thivent, “Consolidation Project of the Electrostatic Septa in the CERN PS Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH140, pp. 1541-1543.
[n] A. W. Chao, P. L. Morton, and J. R. Rees, “Single Feedback Systems for Simultaneous Damping of Horizontal and Longituninal Coherant Oscillations”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3343-3346.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. H. Xu, Z. H. Sun, D. V. Campen, W. J. Corbett, C. L. Li, and W. J. Zhang, “Time Response of a Gridded X-ray Beam Ionization Chamber”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4220-4222.
- W. Fischer, M. Blaskiewicz, P. H. Pile, and W. W. MacKay, “Target and Orbit Feedback Simulations of a muSR Beamline at BNL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2353-2356.
- T. Perron, G. A. Naylor, E. Plouviez, and B. K. Scheidt, “Test of New Diagnostics for Bunch Length Measurement”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT024, pp. XX-XX.
- G. Valentino et al., “A Tool Based on the BPM-interpolated Orbit for Speeding up LHC Collimator Alignment”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP246, pp. 162-165.
- M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “Interleaved Wide and Narrow Pulses for the KAON Factory 1 MHz Chopper”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1181-1184.
- M. Bossard, N. Eddy, O. Mohsen, R. Ainsworth, and Y.-K. Kim, “Measurement of stability diagrams in the IOTA ring at Fermilab”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR48, pp. 2604-2607.
- K. M. Thompson, S. Kim, R. Lari, and L. R. Turner, “Quadrupole Magnet for the APS Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 396-399.
- J. R. Rees, “A Proposal for Varying the Frequency of a Fixed-Frequency Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59C09, pp. 179-180.
- G. C. Pappas et al., “Fast Kicker Systems for ALS-U”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 564-566.
- M. J. Alguard, B. L. Berman, S. D. Bloom, S. Datz, R. H. Pantell, and R. L. Swent, “Channeling Radiation from Positrons”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3865-3868.
- A. G. Golovkina, I. V. Kudinovich, D. A. Ovsyannikov, and Y. A. Svistunov, “The Problems of Accelerator-Driver Design for ADS”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 486-489.
- C. L. Li, W. J. Zhang, W. J. Corbett, and Y. H. Xu, “Polarization Measurement and Modeling of Visible Synchrotron Radiation at Spear3”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 240-243.
- S. V. Kuzikov, M. E. Plotkin, A. A. Vikharev, J. L. Hirshfield, T. C. Marshall, and G. V. Sotnikov, “Short-Period RF Undulator for a Nanometer SASE Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC169, pp. 3293-3295.
- M. J. Browman, “Using the Panofsky-Wenzel Theorem in the Analysis of Radio-Frequency Deflectors”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 800-803.
- T. Nakagawa, Y. Higurashi, J. Ohnishi, T. Aihara, and M. Tamura, “Status of RIKEN SC-ECRIS”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOAK03, pp. 8-10.
- V. Wu, C. M. Bhat, and J. A. MacLachlan, “Simulations of an Acceleration Scheme for Producing High Intensity and Low Emittance Antiproton Beam for Fermilab Collider Operation”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP031, pp. 2164-2166.
- J.-H. Jang et al., “Initial beam commissioning results of RAON linac”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEBD1, unpublished.
- M. J. Rhee and R. F. Schneider, “Compact Pulsed Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3192-3195.
- M. M. Maggiore, A. M. Porcellato, and S. Stark, “Study of the RFQ Beam Cooler for SPES project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD026, pp. 1467-1469.
- N. V. Vasiliev, A. A. Glazov, V. A. Kochkin, D. L. Novikov, and E. N. Zaplatin, “Prototype of the Accelerating Resonator for the Superconducting Sector Deuteron Cyclotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1017-1020.
- J. Bergl et al., “Embedded Controllers, Field Bus and a Modular IO Concept: Central Elements of BESSY II Controls”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P022, pp. 2493-2495.
- R. J. Sachtschale, C. Dickey, and P. Morcombe, “A Novel Technique for Pulsing Magnet Strings with a Single Switch”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1339-1342.
- W. R. Smythe, “Reducing Ferrite Tuner Power Loss by Bias Field Rotation”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2173-2176.
- I. Kalagin, G. Gulbekian, and I. Ivanenko, “The Experimental Investigation of the Beam Transportation Efficiency through the Axial Injection System of the U400 Cyclotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH150, pp. 1568-1570.
- M. J. Browman and L. M. Young, “Coupled Radio-Frequency Quadrupoles as Compensated Structures”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO411, pp. 70-72.
- Y.-M. Wang, S.-I. Kwon, A. H. Regan, and T. S. Rohlev, “System Identification of the Linac RF System Using a Wavelet Method and Its Applications in the SNS LLRF Control System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH301, pp. 1613-1615.
- W. D. Stem, Y.-J. Chen, and J. Ellsworth, “Mitigation of Nonlinear Phase Space in a Space-Charge-Limited Injector Diode”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 905-908.
- F. M. Mirapeix, J. A??el, J. Amores, J. Presa, and A. Urzainki, “High Precision Manufacturing for LINAC's”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP077, pp. 603-606.
- E. V. Pickulin, V. N. Malyshev, S. A. Silaev and Y. A. Svistunov, “Modelling of Accelerating Structures with Finite-difference Time-domain Method”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT110, pp. 2742-2744.
- R. Booth, H. H. Barschall, and E. Goldberg, “Rotating Target for Intense 14-MeV Neutron Source”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 472-475.
- O. Grimm, C. Behrens, J. Rossbach, and B. Schmidt, “Longitudinal Beam Diagnostics Application of Synchrotron Radiation at FLASH”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC031, pp. 1116-1118.
- G. D. Wait, M. J. Barnes, D. Bishop, C. B. Figley, and G. Waters, “Prototype Studies of a 1 MHz Chopper for the KOAN Factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 964-967.
- T. J. Shea, J. Mead, P. Cerniglia, and C. Degen, “Evaluation of IEEE 1394 Serial Bus for Distributed Data Acquisition”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P025, pp. 2502-2504.
- V. Ptitsyn, C. Montag, and S. Tepikian, “Electron Polarization in the eRHIC Ring-Ring Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3403-3405.
- L. O. Dallin, D. Bodnarchuk, and T. Summers, “Optimizing Beam Brightness at the Canadian Light Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN005, pp. 920-922.
- V. Chouhan et al., “Transfer of EP and doping technology for PIP-II HB650 cavities from Fermilab to industry”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 685-688.
- V. Chouhan et al., “Excellent performance of 650 MHz single-cell niobium cavity after electropolishing”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 692-694.
- G. E. Danby and J. W. Jackson, “Static and Dynamic Magnetic End Effects and Correction Magnets for the AGS Booster”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 381-384.
- T. Wlostowski, G. Daniluk, M. M. Lipinski, J. Serrano, and F. Vaga, “Trigger and RF Distribution Using White Rabbit”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 619-623.
- J. Borburgh, M. Hourican, and M. Thivent, “Consolidation Project of the Electrostatic Septa in the CERN PS Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH140, pp. 1541-1543.
- A. W. Chao, P. L. Morton, and J. R. Rees, “Single Feedback Systems for Simultaneous Damping of Horizontal and Longituninal Coherant Oscillations”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3343-3346.
Back to search