JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. Iwashita, Y. Fuwa, Y. Kuriyama, and H. Tongu, “Faint magnetic field shield using the Meissner effect”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1818-1821. doi:10.18429/JACoW-IPAC2025-WEPB037
[n]	E. S. Fischer, A. Bleile, J. P. Meier, A. Mierau, P. Schnizer, and P. G. Akishin, “The SIS100 Superconducting Fast Ramped Dipole Magnet”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2681-2683. doi:10.18429/JACoW-IPAC2014-WEPRI083
[n]	M. Lindroos, H. Danared, R. Garoby, D. P. McGinnis, and E. Tanke, “Status of the ESS Accelerator Construction Project”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3870-3872. doi:10.18429/JACoW-IPAC2015-THPF080
[n]	V. Ayvazyan, S. Choroba, Z. Geng, G. Petrosyan, S. Simrock, and V. Vogel, “Optimization of Filling Procedure for TESLA-type Cavities for Klystron RF Power Minimization of European XFEL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA039, pp. 1416-1418. 
[n]	F. Schmidt-Foehre, D. Noelle, R. Susen, and K. Wittenburg, “Tests and Measurements with the Embedded Radiation-monitor-system Prototype for Dosimetry at the European XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR033, pp. 4041-4043. 
[n]	H. Delsim-Hashemi et al., “Undulators of the sFLASH Experiment”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD014, pp. 3114-3116. 
[n]	S. Andrianov and A. Abramova, “ANALYTICAL AND NUMERICAL METHODS IN BEAM PHYSICS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP28, pp. XX-XX. 
[n]	V. Volkov et al., “The Source of Emittance Dilution and photoemission tunneling effect in Photocathode RF Guns”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD062, pp. 1542-1544. 
[n]	U. Dorda, R. W. Assmann, K. Floettmann, B. Marchetti, Y. C. Nie, and J. Zhu, “Simulation Results of the Beam Transport of Ultra-Short Electron Bunches in Existing Beam Transfer Lines to Sinbad”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1466-1468. doi:10.18429/JACoW-IPAC2015-TUPWA028
[n]	J. Jacob and O. Naumann, “Landau Damping of Longitudinal Instabilities for the Operation of the ESRF Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP04G, pp. 987-989. 
[n]	B. T. McCuistian et al., “Temporal Spot Size Evolution of the DARHT First Axis Radiographic Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC066, pp. 1206-1208. 
[n]	V. V. Paramonov, “The CDS Parameters for Proton Linac with Moderate Heat Loading”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA013, pp. 65-67. 
[n]	K. Hatanaka et al., “Development of HTS Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOAC02, pp. 1095-1097. 
[n]	Z. Liu et al., “NSRL Phase 2 Project”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6A002, pp. 636-640. 
[n]	M. Titberidze and K. Chouffani, “Laser Compton Scattering X-rays as a Tool for K-edge Densitometry”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR068, pp. 4133-4135. 
[n]	E. S. Fischer et al., “Fast Ramped Superferric Prototype Magnets of the FAIR Project ÔÇô First Test Results and Design Update”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP065, pp. 277-279. 
[n]	E. Trachanas et al., “Installation and integrated testing of magnets for the ESS linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3635-3638. doi:10.18429/JACoW-IPAC2023-WEPM035
[n]	P. Costa Pinto et al., “Implementation of Carbon Thin Film Coatings in the Super Proton Synchrotron (SPS) for Electron Cloud Mitigation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2574-2576. doi:10.18429/JACoW-IPAC2014-WEPRI043
[n]	D. J. Liska, J. Potter, and J. Uher, “Cryogenic Studies of RF Accelerating Structures, Vintage 1978”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-26, pp. 104-105. 
[n]	H. Sakai et al., “Development of Input Coupler for Compact ERL Main Linac”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG3006, pp. 91-96. 
[n]	D. P. McGinnis, “New Design Approaches for High Intensity Superconducting Linacs ÔÇô The New ESS Linac Design”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 23-27. doi:10.18429/JACoW-IPAC2014-MOYBA02
[n]	A. Orzhekhovskaya, G. Clemente, L. Groening, S. Mickat, and B. Schlitt, “Optimization of an IH-cavity based High Energy Heavy-ion Linac at GSI”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3214-3216. doi:10.18429/JACoW-IPAC2014-THPME005
[n]	F. Lemery, D. Mihalcea, P. Piot, and J. Zhu, “Planned High-gradient Flat-beam-driven Dielectric Wakefield Experiments at the Fermilab's Advanced Superconducting Test Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1451-1453. doi:10.18429/JACoW-IPAC2014-TUPME042
[n]	H. Weise, “How To Produce 100 Superconducting Modules for the European XFEL in Collaboration and with Industry”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1923-1928. doi:10.18429/JACoW-IPAC2014-WEIB03
[n]	L. W. Zhang, J. Li, W. D. Wang, and Y. Li, “Performance Optimization of the Stacked-Blumlein”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD072, pp. 3680-3682. 
[n]	B. Sinha and R. K. Bhandari, “Status of the Superconducting Cyclotron Project at VECC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM201, pp. XX-XX. 
[n]	Y. K. Zhao, W. Li, B. G. Sun, Y. G. Tang, F. F. Wu, and T. Y. Zhou, “Design of the Multiplexing Optical Measurement System for a Pre-bunched THz Free Electron Laser”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2931-2933. doi:10.18429/JACoW-IPAC2019-WEPRB054
[n]	W. Merz and H. Pfeffer, “The Fermilab Dzero Overpass Power Supply System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3763-3766. 
[n]	Y. Nosochkov, P. Emma, T. O. Raubenheimer, and M. Woodley, “Design of the LCLS-II Electron Optics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2940-2942. doi:10.18429/JACoW-IPAC2014-THPRO034
[n]	F. Schlander et al., “The Superconducting Accelerator for the ESS Project”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 24-28. doi:10.18429/JACoW-SRF2017-MOYA01
[n]	M. Schmei?ƒer et al., “Results from Beam Commissioning of an SRF Plug-gun Cavity Photoinjector”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI002, pp. 282-284. 
[n]	M. V. Fazio, B. E. Carlsten, L. M. Earley, and J. Potter, “High-Power, Millimeter-Wave Source Development at Los Alamos National Laboratory”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO466, pp. 193-195. 
[n]	R. G. Heine, K. Aulenbacher, and R. Eichhorn, “MESA - Sketch of an Energy Recovery Linac for Nuclear Physics Experiments at Mainz”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR073, pp. 1993-1995. 
[n]	M. Eshraqi, H. Danared, and D. P. McGinnis, “Design Options of the ESS Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO072, pp. 3921-3923. 
[n]	C. Hauviller, “Fully Hydroformed RF Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 485-488. 
[n]	N. Elias, C. Darve, J. Fydrych, A. Nordt, and D. P. Piso, “Preliminary Functional Analysis and Operating Modes of ESS 704 MHz Superconducting Radio-Frequency Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3317-3319. doi:10.18429/JACoW-IPAC2014-THPME042
[n]	F. Marcellini et al., “Design of Cavity BPM Pickups for SwissFEL”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA24, pp. 390-393. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search