JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. N. Shaposhnikova et al., “Experimental Studies of Carbon Coatings as Possible Means of Suppressing Beam Induced Electron Multipacting in the CERN SPS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP008, pp. 366-368. 
[n]	A. Tauschwitz et al., “Beam Test of a Plasma Lens for Heavy Ion Beam Focusing”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 593-596. 
[n]	J. Beebe-Wang, F. A. Dilmanian, S. Peggs, D. J. Schlyer, and P. Vaska, “Feasibility of Positron Emission Tomography of Dose Distribution in Proton Beam Cancer Therapy”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI084, pp. 2721-2723. 
[n]	R. Warange et al., “SKA Synchronization and Timing Local Monitor Control - Project Status”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1582-1586. doi:10.18429/JACoW-ICALEPCS2017-THPHA085
[n]	S. Henderson et al., “Beam Dump Window Design for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG020, pp. 1467-1469. 
[n]	H. Gassot et al., “Mechanical Stiffening of SRF Niobium Cavities by Thermal Sprayed Coating”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP024, pp. 472-477. 
[n]	Y. Cho, C. W. Potts, A. V. Rauchas, S.-A. Shin, and H. Takeda, “Study of RF Capture Process in the Argonne Rapid Cycling Synchrotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3040-3043. 
[n]	A. Beuret and F. Bordry, “The Control Loops of the High Power D. C. Power Converters of LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1197-1200. 
[n]	J. Resta-Lopez, A. Faus-Golfe, and F. Zimmermann, “LHC Impedance Reduction by Nonlinear Collimation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN085, pp. 1571-1573. 
[n]	E. Piselli, A. Akroh, S. Rothe, D. Leimbach, K. Blaum, and M. Door, “CERN Accelerators Beam Optimization Algorithm”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1383. doi:10.18429/JACoW-ICALEPCS2019-WEPHA124
[n]	G. I. Batskikh, A. P. Fedotov, and B. P. Murin, “Linear Accelerator for Burner-Reactor”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH401, pp. 581-583. 
[n]	E. Boggasch et al., “Plasma Lenses for Heavy Ion Beam Focusing”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 596-599. 
[n]	X. Y. Zhang et al., “Preliminary Design of 325 MHz Half-Wave Resonator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO025, pp. 2369-2371. 
[n]	V. Karpenko et al., “Mechanical Design of Recirculating Accelerator Experiments for Heavy-Ion Fusion”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR17, pp. 837-839. 
[n]	N. Bultman, J. Billen, Z. Chen, M. Collier, D. Richards, and L. M. Young, “Fabrication and Tuning of the SNS CCL Hot Model”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB052, pp. 2844-2846. 
[n]	H. Reymond et al., “The Post-Mortem Analysis Software Used for the Electrical Circuit Commissioning of the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC151, pp. 3345-3347. 
[n]	G. C. Schneider, “A 1.5 GHz Wide-Band Beam-Position and Intensity Monitor for the Electron Positron Accumulator (EPA)”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 664-667. 
[n]	B. Ketenoglu et al., “The TAC IR FEL Oscillator Facility Project”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC38, pp. 580-582. 
[n]	S. Asaoka, T. Igarashi, G. Isoyama, A. Mikuni, Y. Miyahara, and H. Nishimura, “Present Status of SOR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2944-2947. 
[n]	J. Power, D. Barr, J. Gilpatrick, D. Martinez, R. Shurter, and M. Stettler, “Beam Current Measurements for LEDA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA164, pp. 2241-2243. 
[n]	H. Kraft and L. Perrot, “Beam Dynamics and Diagnostics for the High Energy Beam Transport Line of MINERVA Project at SCKÔÇóCEN”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2304-2306. doi:10.18429/JACoW-IPAC2019-WEPMP003
[n]	J. J. Petillo et al., “The MICHELLE Electron Gun and Collector Modeling Tool”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH090, pp. 3054-3056. 
[n]	J. C. Garnier et al., “Reliable Software Development for Machine Protection Systems”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 489-491. doi:10.18429/JACoW-IPAC2014-MOPME050
[n]	R. B. Fiorito and A. G. Shkvarunets Institute for Research in Electronics and Applied Physics, “Use of Optical Transition Radiation Interferometry for Energy Spread And Divergence Measurements”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM01, pp. XX-XX. 
[n]	D. E. Lobb, “Low Momentum Kaon Beam Lines”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2827-2830. 
[n]	X. Cao and D. Proch, “Transient Heat Conduction Analysis in Superconducting Cavities”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F12, pp. XX-XX. 
[n]	L. Perrot and R. Ollier, “Field-map and Beam Transport Calculations of the Magnetic Separator at ALTO Facility at Orsay”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 86-89. doi:10.18429/JACoW-IPAC2019-MOPGW011
[n]	D. L. Friesel et al., “The Indiana University Midwest Proton Radiation Institute”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA004, pp. 645-647. 
[n]	L. A. Day et al., “Automated Control and Real-Time Data Processing of Wire Scanner/Halo Scraper Measurements”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH040, pp. 1309-1311. 
[n]	H. W. Atherton et al., “Contamination of Nuclear Fragments in a 200 GEV per Nucleon Oxygen Ion Beam at CERN”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1752-1755. 
[n]	H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120. 
[n]	U. Bechstedt et al., “Magnets for the German Spallation Source SNQ”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3631-3634. 
[n]	H. Soltner, U. Bechstedt, J. G. De Villiers, and R. T?Âlle, “Magnetic-Field Calculations for the Magnets of the High-Energy Storage Ring (HESR) at FAIR”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP016, pp. 166-168. 
[n]	C. Ryu et al., “PLS Linac Instrument an Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1368-1371. 
[n]	H. Li et al., “The Status of CSNS Front End”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 771-773. doi:10.18429/JACoW-LINAC2018-THPO039
[n]	A. M. Sessler, “Collective Phenomena in Accelerators”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper K02, pp. 291-299. 
[n]	A. A. Gorzawski et al., “The AccTesting Framework: An Extensible Framework for Accelerator Commissioning and Systematic Testing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC078, pp. 1250-1253. 
[n]	D. Schulte, P. Eliasson, A. Latina, F. Poirier, and N. J. Walker, “Study of an ILC Main Linac that Follows the Earth Curvature”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS098, pp. 786-788. 
[n]	F. Schliessmann et al., “Studies on a triple-turn energy-recovery mode at the S-DALINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2143-2146. doi:10.18429/JACoW-IPAC2023-TUPL169
[n]	E. Schibler and L. Perrot, “SAFARI, an Optimized Beam Stop Device for High Intensity Beams at the SPIRAL2 Facility”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC070, pp. 1162-1164. 
[n]	D. J. Crawford et al., “Assembly and Installation of Beam Instrumentation for the ASTA Front-end Diagnostic Table”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3732-3734. doi:10.18429/JACoW-IPAC2014-THPME192
[n]	C. F. Shi, D. Q. Gao, Y. Z. Huang, H. H. Yan, and Z. Z. Zhou, “The Control Strategy Research on Two Kinds of Topological Pulse Power Supply”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA015, pp. 693-695. 
[n]	G. Valentino et al., “Modeling and Simulation of LHC Beam-Based Collimator Setup”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR097, pp. 2059-2061. 
[n]	K. H. Kim et al., “A Method of Closed Orbit Correction under Constraint Conditions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH133, pp. 3552-3554. 
[n]	D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3995-3997. doi:10.18429/JACoW-IPAC2014-THPRI095
[n]	P. Eliasson, M. Korostelev, D. Schulte, R. Tomas, and F. Zimmermann, “Luminosity Tuning at the Interaction Point”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS094, pp. 774-776. 
[n]	Y. L. Zhao et al., “Dynamic Comparison With XAL and Tracewin Based on the Injector-I of China ADS Test Stand”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3572-3574. doi:10.18429/JACoW-IPAC2014-THPME138
[n]	A. Bertarelli et al., “The Mechanical Design for the LHC Collimators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT008, pp. 545-547. 
[n]	S. Bousson et al., “700 MHz Superconducting Proton Cavities Development and First Tests in the Horizontal Cryostat CRYHOLAB""”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO036, pp. 2211-2213. 
[n]	X. P. Li et al., “Progress on the Construction of IHEP 500kV Photocathode DC Gun System”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS06, pp. 93-96. 
[n]	S. Redaelli, R. W. Assmann, M. Donze, R. Losito, and A. Masi, “LHC Collimator Controls for a Safe LHC Operation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU020, pp. 1104-1107. 
[n]	D. B. Bazyl, H. De Gersem, J. Enders, W. F. O. M??ller, and S. Weih, “Design of a Multi-Cell SRF Reduced-Beta Cavity for the Acceleration of Low Energy Electron Beams”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 603-605. doi:10.18429/JACoW-FEL2019-THP008
[n]	N. Sei et al., “Measurement of Electron-Bunch Length Using Coherent Radiation in Infrared Free-Electron Laser Facilities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 288-291. doi:10.18429/JACoW-IPAC2017-MOPAB073
[n]	K. Nam, J. Choi, S. Hahn, and S. Oh, “Lattice Design for the Pohang Synchrotron Light Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 821-824. 
[n]	E. H. R. Gaxiola et al., “Upgrade and Tests of the SPS Fast Extraction Kicker System for LHC and CNGS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT016, pp. 566-568. 
[n]	C. Li, Y.-C. Du, W.-H. Huang, C.-X. Tang, and L. X. Yan, “Electron Bunch Slice Emittance Measurement with the Space Charge Effects”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC109, pp. 1272-1274. 
[n]	P. J. S. Barratt, A. P. Letchford, M. Perkins, C. W. Planner, and R. Sidlow, “Operational Experience of Penning H- Ion Sources at ISIS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP084L, pp. 1525-1527. 
[n]	J. Grillenberger, M. Humbel, J. Y. Raguin And P, and A. Schmelzbach, “Commissioning And Tuning Of The New Buncher System In The 870 Kev Injection Beamline”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 464-466. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search