Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Shin, C.-K. Sung, C. Kim, I. Nam, and M. Chung, “Electron beam test to the multi-stripline-based non-destructive energy spread monitor for the PAL-XFEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA007, unpublished.
[n] F. Saeidi, S. Dastan, S. Fatehi, J. Rahighi, and M. Razazian, “ILSF Booster Magnets for the New Low Emittance Lattice”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4145-4147. doi:10.18429/JACoW-IPAC2019-THPTS018
[n] K. I. Kuzmenkov et al., “Production of Metal Ion Beams from ECR Ion Sources by MIVOC Method”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC47, pp. 432-434.
[n] M. P. Atkinson, G. LeBlanc, and K. Zingre, “Operational Experience with a Sled and Multibunch Injection at the Australian Synchrotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 830-832. doi:10.18429/JACoW-IPAC2019-MOPTS001
[n] C. J. Thompson et al., “High Temperature Persistence and Interatomic Forces of Nb(100)-(3x1)-O Shown by High Resolution Helium Diffraction, Inelastic Time-of-Flight Measurements, and Density Functional Theory Calculations”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPFDV004, pp..
[n] S. A. Kondrashev, J.-W. Kim, Y. K. Kwon, Y. H. Park, and H. J. Son, “EBIS Charge Breeder for RAON Facility”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 696-699. doi:10.18429/JACoW-NAPAC2016-WEPOA05
[n] E. Laface, S. Hasan, C. Santoni, and W. Scandale, “Crystals Application in the TOTEM Experiment to Increase the Acceptance of a Roman Pot”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD031, pp. 1491-1493.
[n] E. E. Wisniewski et al., “Summary of Cs2te Photocathode Performance and Improvements in the High-Gradient, High-Charge AWA Drive Gun”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 934-936. doi:10.18429/JACoW-NAPAC2016-WEPOB19
[n] N. Montanez, G. Lawler, N. Majernik, and J. Rosenzweig, “Novel Fabrication Methods and Geometries of Nanoblade Cathodes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1622-1624. doi:10.18429/JACoW-IPAC2023-TUPA142
[n] R. R. Geraldes et al., “Design and Commissioning of the TARUM?â Station at the CARNA?ÜBA Beamline at Sirius/LNLS”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 292. doi:10.18429/JACoW-MEDSI2020-WEPB13
[n] T. Dehaeze, J. Bonnefoy, and G. R. L. Collette, “Mechatronics Approach for the Development of a Nano-Active-Stabilization-System”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 93. doi:10.18429/JACoW-MEDSI2020-TUIO02
[n] H. Yang, C. H. Shim, I. Nam, and M. Cho, “Electron bunch spacing for the FEL generation with a laser heater and collimators at PAL-XFEL”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG41, unpublished.
[n] G. C. Pappas and R. L. Cassel, “An IGBT Driven Slotted Beam Pipe Kicker for SPEAR III Injection”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH034, pp. 3747-3749.
[n] A. Sy et al., “Degrader beamline design at the CEBAF injector for machine acceptance studies”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1162-1165. doi:10.18429/JACoW-IPAC2023-MOPM081
[n] X. F. Wang et al., “Physical Design for EEHG Beamlines at S3FEL”, in Proc. SAP'23, Xichang, China, Jul. 2023, pp. 55-58. doi:10.18429/JACoW-SAP2023-MOPB026
[n] G. D'Auria et al., “Linac Upgrades for FERMI@ELETTRA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP44, pp. 366-368.
[n] G. W. Kowalski, K. Gula, R. Pana, A. I. Wawrzyniak, and J. J. Wiechecki, “Design and Status of Fast Orbit Feedback System at SOLARIS”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper WEP35, unpublished.
[n] V. V. Mitrochenko et al., “High-Power Electron Linac for Irradiation Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH318, pp. 2805-2807.
[n] J. P. Labrie and T. Tran Ngoc, “High Power Behaviour of Ka Band Linac Structures”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1830-1833.
[n] C. Benvenuti, N. Circelli, M. Hauer, and W. Weingarten, “Superconducting 500MHz Accelerating Copper Cavities Sputter - Coated with Niobium Films”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-34, pp. XX-XX.
[n] A. Meseck et al., “Development of the In-vacuum APPLE II Undulators at HZB”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper TH3B1, unpublished.
[n] C. Serrano, L. R. Doolittle, A. Ratti, and A. Vaccaro, “Ensemble Cavity Control System Simulation Using Pulse-to-pulse Calibration”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC150, pp. 1422-1424.
[n] V. Morozov et al., “Development of FFA RLA design concept”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPC42, unpublished.
[n] S. Ikeda, T. Shibuya, and N. Hayashizaki, “Study of Electrode Configuration of the Four Beam IH-RFQ Linac”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB08, pp. 209-211.
[n] Y. D. Chernousov, A. M. Barnyakov, A. E. Levichev, V. M. Pavlov, V. Ivannikov, and I. V. Shebolaev, “Localization of the RF Breakdown in the Parallel Coupled Accelerating Structure”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA018, pp. 281-283.
[n] J. A. Mitchell et al., “Simulation and Measurements of Crab Cavity HOMs and HOM Couplers for HL-LHC”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 881-885. doi:10.18429/JACoW-SRF2017-THPB059
[n] C. R. J. Charles, F. Ames, M. Cavenaile, and B. E. Schultz, “Simulations of the CANREB EBIS: Where Might the Issue(s) Be?”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper TH2WH04, unpublished.
[n] S.-Y. Teng, S.-H. Chen, W.-Y. Chiang, S.-W. Chou, and W. Lau, “Calculation for a compact laser plasma undulator beamline based on the experimental beam parameters at NCU”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1870-1873. doi:10.18429/JACoW-IPAC2023-TUPL052
[n] B. Bowling, J. Kewisch, P. Kloeppel, and R. Rossmanith, “A Fast Optics and Orbit Correction Program”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1452-1455.
[n] J. E. Allinger, G. T. Danby, J. W. Jackson, and L. W. Smith, “Large Cost Reductions Made Possible by Reevaluation of Beam Transoprt Parameters”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 797-802.
[n] N. Hayashi, S. Hatakeyama, and K. Yamamoto, “Pulse Based Data Archive System and Analysis for Current and Beam Loss Monitors in the J-PARC RCS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3800-3802. doi:10.18429/JACoW-IPAC2014-THPRI016
[n] D. G. McGhee, “Operation of Complex Arrangements of Power Supplies in the Zero Gradient Synchrotron Experimental Area”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 873-875.
[n] A. A. Sahai et al., “Nanoplasmonic Accelerators Towards Tens of TeraVolts per Meter Gradients Using Nanomaterials”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 574-577. doi:10.18429/JACoW-IPAC2021-MOPAB168
[n] R. L. Warnock, K. Ecklund, and R. D. Ruth, “Construction and Fourier Analysis of Invariant Surfaces from Tracking Data”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1325-1328.
[n] A. Vaccaro, L. R. Doolittle, A. Ratti, and C. Serrano, “Hardware-software Simulation for LLRF Control System Development”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC153, pp. 1428-1430.
[n] I. I. Degtyarev, A. E. Lokhovitskii, and I. A. Yazynin, “Efficiency of the UNK Scraper System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P119, pp. 252-254.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Shin, C.-K. Sung, C. Kim, I. Nam, and M. Chung, “Electron beam test to the multi-stripline-based non-destructive energy spread monitor for the PAL-XFEL”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA007, unpublished.
- F. Saeidi, S. Dastan, S. Fatehi, J. Rahighi, and M. Razazian, “ILSF Booster Magnets for the New Low Emittance Lattice”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4145-4147.
- K. I. Kuzmenkov et al., “Production of Metal Ion Beams from ECR Ion Sources by MIVOC Method”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC47, pp. 432-434.
- M. P. Atkinson, G. LeBlanc, and K. Zingre, “Operational Experience with a Sled and Multibunch Injection at the Australian Synchrotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 830-832.
- C. J. Thompson et al., “High Temperature Persistence and Interatomic Forces of Nb(100)-(3x1)-O Shown by High Resolution Helium Diffraction, Inelastic Time-of-Flight Measurements, and Density Functional Theory Calculations”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPFDV004, pp..
- S. A. Kondrashev, J.-W. Kim, Y. K. Kwon, Y. H. Park, and H. J. Son, “EBIS Charge Breeder for RAON Facility”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 696-699.
- E. Laface, S. Hasan, C. Santoni, and W. Scandale, “Crystals Application in the TOTEM Experiment to Increase the Acceptance of a Roman Pot”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD031, pp. 1491-1493.
- E. E. Wisniewski et al., “Summary of Cs2te Photocathode Performance and Improvements in the High-Gradient, High-Charge AWA Drive Gun”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 934-936.
- N. Montanez, G. Lawler, N. Majernik, and J. Rosenzweig, “Novel Fabrication Methods and Geometries of Nanoblade Cathodes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA142, pp. 1622-1624.
- R. R. Geraldes et al., “Design and Commissioning of the TARUM?â Station at the CARNA?ÜBA Beamline at Sirius/LNLS”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 292.
- T. Dehaeze, J. Bonnefoy, and G. R. L. Collette, “Mechatronics Approach for the Development of a Nano-Active-Stabilization-System”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 93.
- H. Yang, C. H. Shim, I. Nam, and M. Cho, “Electron bunch spacing for the FEL generation with a laser heater and collimators at PAL-XFEL”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG41, unpublished.
- G. C. Pappas and R. L. Cassel, “An IGBT Driven Slotted Beam Pipe Kicker for SPEAR III Injection”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH034, pp. 3747-3749.
- A. Sy et al., “Degrader beamline design at the CEBAF injector for machine acceptance studies”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM081, pp. 1162-1165.
- X. F. Wang et al., “Physical Design for EEHG Beamlines at S3FEL”, in Proc. 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, pp. 55-58.
- G. D'Auria et al., “Linac Upgrades for FERMI@ELETTRA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP44, pp. 366-368.
- G. W. Kowalski, K. Gula, R. Pana, A. I. Wawrzyniak, and J. J. Wiechecki, “Design and Status of Fast Orbit Feedback System at SOLARIS”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper WEP35, unpublished.
- V. V. Mitrochenko et al., “High-Power Electron Linac for Irradiation Applications”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH318, pp. 2805-2807.
- J. P. Labrie and T. Tran Ngoc, “High Power Behaviour of Ka Band Linac Structures”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1830-1833.
- C. Benvenuti, N. Circelli, M. Hauer, and W. Weingarten, “Superconducting 500MHz Accelerating Copper Cavities Sputter - Coated with Niobium Films”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-34, pp. XX-XX.
- A. Meseck et al., “Development of the In-vacuum APPLE II Undulators at HZB”, presented at the 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH3B1, unpublished.
- C. Serrano, L. R. Doolittle, A. Ratti, and A. Vaccaro, “Ensemble Cavity Control System Simulation Using Pulse-to-pulse Calibration”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC150, pp. 1422-1424.
- V. Morozov et al., “Development of FFA RLA design concept”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC42, unpublished.
- S. Ikeda, T. Shibuya, and N. Hayashizaki, “Study of Electrode Configuration of the Four Beam IH-RFQ Linac”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB08, pp. 209-211.
- Y. D. Chernousov, A. M. Barnyakov, A. E. Levichev, V. M. Pavlov, V. Ivannikov, and I. V. Shebolaev, “Localization of the RF Breakdown in the Parallel Coupled Accelerating Structure”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA018, pp. 281-283.
- J. A. Mitchell et al., “Simulation and Measurements of Crab Cavity HOMs and HOM Couplers for HL-LHC”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 881-885.
- C. R. J. Charles, F. Ames, M. Cavenaile, and B. E. Schultz, “Simulations of the CANREB EBIS: Where Might the Issue(s) Be?”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper TH2WH04, unpublished.
- S.-Y. Teng, S.-H. Chen, W.-Y. Chiang, S.-W. Chou, and W. Lau, “Calculation for a compact laser plasma undulator beamline based on the experimental beam parameters at NCU”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL052, pp. 1870-1873.
- B. Bowling, J. Kewisch, P. Kloeppel, and R. Rossmanith, “A Fast Optics and Orbit Correction Program”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1452-1455.
- J. E. Allinger, G. T. Danby, J. W. Jackson, and L. W. Smith, “Large Cost Reductions Made Possible by Reevaluation of Beam Transoprt Parameters”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 797-802.
- N. Hayashi, S. Hatakeyama, and K. Yamamoto, “Pulse Based Data Archive System and Analysis for Current and Beam Loss Monitors in the J-PARC RCS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3800-3802.
- D. G. McGhee, “Operation of Complex Arrangements of Power Supplies in the Zero Gradient Synchrotron Experimental Area”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 873-875.
- A. A. Sahai et al., “Nanoplasmonic Accelerators Towards Tens of TeraVolts per Meter Gradients Using Nanomaterials”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 574-577.
- R. L. Warnock, K. Ecklund, and R. D. Ruth, “Construction and Fourier Analysis of Invariant Surfaces from Tracking Data”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1325-1328.
- A. Vaccaro, L. R. Doolittle, A. Ratti, and C. Serrano, “Hardware-software Simulation for LLRF Control System Development”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC153, pp. 1428-1430.
- I. I. Degtyarev, A. E. Lokhovitskii, and I. A. Yazynin, “Efficiency of the UNK Scraper System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P119, pp. 252-254.
Back to search