Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Danzeca, “Developing Electronics for Radiation Environments”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper FRAO01, unpublished.
[n] S. Rowan et al., “Qualification of the Bypass Continuity of the Main Dipole Magnet Circuits of the LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3141-3144. doi:10.18429/JACoW-IPAC2015-WEPHA017
[n] A. Lechner et al., “Power Deposition in LHC Magnets With and Without Dispersion Suppressor Collimators Downstream of the Betatron Cleaning Insertion”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 112-115. doi:10.18429/JACoW-IPAC2014-MOPRO021
[n] H. Damerau, A. Findlay, S. S. Gilardoni, and S. Hancock, “RF Manipulations for Higher Brightness LHC-type Beams”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA044, pp. 2600-2602.
[n] Y. G. Alenitsky et al., “The High Current Cylotron Complex for an Electronuclear Way of Production of Energy”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper L-4, pp. XX-XX.
[n] J. P. Duke, D. J. S. Findlay, and G. R. Murdoch, “Design of a Gas Scattering Energy Analyser for the ISIS RFQ Accelerator Test Stand”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH115, pp. 2350-2352.
[n] C. Y. Yoshikawa, R. J. Abrams, A. Afanasev, C. M. Ankenbrandt, K. B. Beard, and D. V. Neuffer, “Positron Production for a Compact Tunable Intense Gamma Ray Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA045, pp. 175-177.
[n] S. Boucher et al., “Compact, Inexpensive X-band Linacs as Radioactive Isotope Source Replacements”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA051, pp. 3746-3748.
[n] E. Cormier-Michel et al., “Design of 10 GeV Laser Wakefield Accelerator Stages with Shaped Laser Modes”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC013, pp. 281-284.
[n] C. Carli et al., “Studies on Single Batch Transfer of LHC Type Beams between the CERN PS Booster and the PS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP035, pp. 3778-3780.
[n] J. L. Kirchgessner, “Forming and Welding of Niobium for Superconducting Cavities”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87E05, pp. XX-XX.
[n] R. B. Palmer, “Design of Superconducting Magnets for the SSC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 32-37.
[n] D. Barna, W. Bartmann, J. Borburgh, C. Carli, and G. Vanbavinckhove, “Field Simulations and Mechanical Implementation of Electrostatic Elements for the ELENA Transfer Lines”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 855-857. doi:10.18429/JACoW-IPAC2014-MOPRI101
[n] A.-S. M??ller, I. Birkel, E. Huttel, M. Pont, F. P?®rez, and F. Zimmermann, “Studies of Current Dependent Effects at ANKA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT070, pp. 2011-2013.
[n] H. Dewa et al., “Laser Driven RF Signal Generation with an Amplitude Stabilization Technique”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC76, pp. 678-681.
[n] I. Moya et al., “Manufacturing and Testing of the First Phase Shifter Prototypes Built by CIEMAT for the European-XFEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC174, pp. 3308-3310.
[n] M. Katoh et al., “Microfabrication of Relativistic Electron Beam by Laser and its Application to THz Coherent Synchrotron Radiation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC041, pp. 163-165.
[n] V. Grishin et al., “The First Experience and Results of Beam Diagnostics Deployment at the ESS Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2054-2057. doi:10.18429/JACoW-IPAC2018-WEPAF087
[n] E. Adli et al., “First Results from the Electron Hose Instability Studies in FACET”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOOAB02, pp. 43-45.
[n] M. L. Neubauer, E. P. Chojnacki, M. Liepe, H. Padamsee, and R. Sah, “Beam Pipe HOM Absorber for 750 MHz RF Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP043, pp. 2092-2094.
[n] M. Giovannozzi et al., “Analysis of Optical Layouts for the Phase 1 Upgrade of the CERN Large Hadron Collider Insertion Regions”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP012, pp. 2551-2553.
[n] A. S. Divatia, “Invited Paper: Operation of the Variable Energy Cyclotron at Calcutta”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-03, pp. 1882-1888.
[n] C.-K. Min et al., “Current Status of Development of Optical Synchronization System for PAL XFEL”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC38, pp. 772-774.
[n] H. Maesaka et al., “Precise RF Control System of the SCSS Test Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC143, pp. 1404-1406.
[n] R. Bruce, R. W. Assmann, W. Herr, and D. Wollmann, “Calculation Method for Safe Beta* in the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ013, pp. 1828-1830.
[n] R. Brinkmann and M. Boege, “Beam-based Alignment and Polarization Optimization in the HERA Electron Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 938-941.
[n] O. Mete et al., “Upgrades of the SPS, Transfer Line and LHC Injection Protection Devices for the HL-LHC Era”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI053, pp. 401-403.
[n] F. Mayet et al., “A Concept for Phase-Synchronous Acceleration of Microbunch Trains in DLA Structures at SINBAD”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3260-3263. doi:10.18429/JACoW-IPAC2017-WEPVA006
[n] A.-S. Mueller, I. Birkel, E. Huttel, F. Perez, M. Pont, and R. Rossmanith, “Linear and Nonlinear Optics Studies in the ANKA Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG043, pp. 3273-3275.
[n] N. Eddy, J. L. Crisp, S. De Santis, I. Kourbanis, K. Seiya, and R. M. Zwaska, “Measurement of Electron Cloud Development in the Fermilab Main Injector Using Microwave Transmission”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4GRC02, pp. 1967-1969.
[n] C. M. Kleffner et al., “Status of the FAIR Proton LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 889-891. doi:10.18429/JACoW-IPAC2019-MOPTS020
[n] Y. Otake et al., “Development of the Optical Timing and RF Distribution System for XFEL/SPring-8”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH046, pp. 352-355.
[n] P. N. Ostroumov, “Heavy Ion Superconducting Linacs: Status and Upgrade Projects”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper THA01, pp. 196-196.
[n] J. Kim, M. Kim, I. H. Nam, H. Suk, and M. S. Hur, “Numerical Studies on Tunable Coherent Radiations with a Laser-Plasma Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2579-2581. doi:10.18429/JACoW-IPAC2016-WEPMY015
[n] A. Marsili, E. B. Holzer, and P. M. Puzo, “LHC Beam Loss Pattern Recognition”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC141, pp. 1353-1355.
[n] A. Mereghetti et al., “Energy Deposition Studies for the Upgrade of the LHC Injection Lines”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO034, pp. 963-965.
[n] M. P. Kelly et al., “Production 72 MHz =0.077 Superconducting Quarter-wave Cavities for ATLAS”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper WEC01, pp. 174-174.
[n] Y. Mori et al., “Present Status of FFAG Proton Accelerator at KURRI”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS077, pp. 2685-2687.
[n] D. Gex et al., “Engineering Issues of the Medium Energy Beam Transport Line and SRF Linac for the LIPAc”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2377-2379. doi:10.18429/JACoW-IPAC2016-WEPMR045
[n] Yu. V. Korotaev, I. N. Meshkov, S. V. Mironov, A. O. Sidorin, and E. Syresin, “The Low Energy Positron Storage Ring for Positronium Generation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP07B, pp. 853-855.
[n] I. Degl, A. Boccardi, L. Fanucci, and M. Wendt, “Direct Digitization and ADC Parameter Trade-off for Bunch-by-Bunch Signal Processing”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 288-294. doi:10.18429/JACoW-IBIC2020-FRAO02
[n] S. A. Melnikov and I. N. Meshkov, “Stability of Charged Particle Motion in a Storage Ring With Focusing by a Longitudinal Magnetic Field”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 158-160. doi:10.18429/JACoW-RUPAC2018-TUPSA08
[n] A. Latina, J. Pfingstner, D. Schulte, and E. Adli, “Performance of Linear Collider Beam-Based Alignment Algorithms at FACET”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR029, pp. 1879-1881.
[n] S. I. Inoue et al., “Beam Monitor System Controller for XFEL/SPring-8”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP069, pp. 534-536.
[n] N. Milas et al., “Preparation of SLS for IBS Measurements”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC034, pp. 1233-1235.
[n] H. von Jagwitz-Biegnitz, P. Beasley, O. Heid, D. C. Faircloth, A. J. Holmes, and R. G. Selway, “2D Wire Grid Integrated with Faraday Cup for Low Energy H- Beam Analysis at Siemens Novel Electrostatic Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF06, pp. 507-510.
[n] C. Martinella et al., “Radiation Levels at the LHC: 2012, 2015 and 2016 Proton Physics Operations in View of HL-LHC requirements”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2075-2077. doi:10.18429/JACoW-IPAC2017-TUPVA015
[n] H. Garcia, A. Latina, and R. Tomas, “Traditional Final Focus System for CLIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR022, pp. 1858-1860.
[n] E.-S. Kim et al., “Design Sudy for Front-End System at Rare Isotope Science Project (RISP)”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper THB03, pp. 207-210.
[n] L. Falbo, “Advanced Accelerator Technology Aspects for Hadron Therapy”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper WEA01, pp. 156-162.
[n] L. M. Hein, J. Esberg, and M. Jonker, “CLIC Decelerator - Machine Protection”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 482-484. doi:10.18429/JACoW-IPAC2014-MOPME048
[n] W. Bartmann, B. Goddard, A. Kosmicki, M. Kowalska, and F. M. Velotti, “Design Study of a 100 GeV Beam Transfer Line from the SPS for a Short Baseline Neutrino Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI055, pp. 407-409.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Danzeca, “Developing Electronics for Radiation Environments”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper FRAO01, unpublished.
- S. Rowan et al., “Qualification of the Bypass Continuity of the Main Dipole Magnet Circuits of the LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3141-3144.
- A. Lechner et al., “Power Deposition in LHC Magnets With and Without Dispersion Suppressor Collimators Downstream of the Betatron Cleaning Insertion”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 112-115.
- H. Damerau, A. Findlay, S. S. Gilardoni, and S. Hancock, “RF Manipulations for Higher Brightness LHC-type Beams”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA044, pp. 2600-2602.
- Y. G. Alenitsky et al., “The High Current Cylotron Complex for an Electronuclear Way of Production of Energy”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper L-4, pp. XX-XX.
- J. P. Duke, D. J. S. Findlay, and G. R. Murdoch, “Design of a Gas Scattering Energy Analyser for the ISIS RFQ Accelerator Test Stand”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH115, pp. 2350-2352.
- C. Y. Yoshikawa, R. J. Abrams, A. Afanasev, C. M. Ankenbrandt, K. B. Beard, and D. V. Neuffer, “Positron Production for a Compact Tunable Intense Gamma Ray Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA045, pp. 175-177.
- S. Boucher et al., “Compact, Inexpensive X-band Linacs as Radioactive Isotope Source Replacements”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA051, pp. 3746-3748.
- E. Cormier-Michel et al., “Design of 10 GeV Laser Wakefield Accelerator Stages with Shaped Laser Modes”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC013, pp. 281-284.
- C. Carli et al., “Studies on Single Batch Transfer of LHC Type Beams between the CERN PS Booster and the PS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP035, pp. 3778-3780.
- J. L. Kirchgessner, “Forming and Welding of Niobium for Superconducting Cavities”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87E05, pp. XX-XX.
- R. B. Palmer, “Design of Superconducting Magnets for the SSC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 32-37.
- D. Barna, W. Bartmann, J. Borburgh, C. Carli, and G. Vanbavinckhove, “Field Simulations and Mechanical Implementation of Electrostatic Elements for the ELENA Transfer Lines”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 855-857.
- A.-S. M??ller, I. Birkel, E. Huttel, M. Pont, F. P?®rez, and F. Zimmermann, “Studies of Current Dependent Effects at ANKA”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT070, pp. 2011-2013.
- H. Dewa et al., “Laser Driven RF Signal Generation with an Amplitude Stabilization Technique”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC76, pp. 678-681.
- I. Moya et al., “Manufacturing and Testing of the First Phase Shifter Prototypes Built by CIEMAT for the European-XFEL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC174, pp. 3308-3310.
- M. Katoh et al., “Microfabrication of Relativistic Electron Beam by Laser and its Application to THz Coherent Synchrotron Radiation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC041, pp. 163-165.
- V. Grishin et al., “The First Experience and Results of Beam Diagnostics Deployment at the ESS Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2054-2057.
- E. Adli et al., “First Results from the Electron Hose Instability Studies in FACET”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOOAB02, pp. 43-45.
- M. L. Neubauer, E. P. Chojnacki, M. Liepe, H. Padamsee, and R. Sah, “Beam Pipe HOM Absorber for 750 MHz RF Cavities”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP043, pp. 2092-2094.
- M. Giovannozzi et al., “Analysis of Optical Layouts for the Phase 1 Upgrade of the CERN Large Hadron Collider Insertion Regions”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP012, pp. 2551-2553.
- A. S. Divatia, “Invited Paper: Operation of the Variable Energy Cyclotron at Calcutta”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-03, pp. 1882-1888.
- C.-K. Min et al., “Current Status of Development of Optical Synchronization System for PAL XFEL”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC38, pp. 772-774.
- H. Maesaka et al., “Precise RF Control System of the SCSS Test Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC143, pp. 1404-1406.
- R. Bruce, R. W. Assmann, W. Herr, and D. Wollmann, “Calculation Method for Safe Beta* in the LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ013, pp. 1828-1830.
- R. Brinkmann and M. Boege, “Beam-based Alignment and Polarization Optimization in the HERA Electron Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 938-941.
- O. Mete et al., “Upgrades of the SPS, Transfer Line and LHC Injection Protection Devices for the HL-LHC Era”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI053, pp. 401-403.
- F. Mayet et al., “A Concept for Phase-Synchronous Acceleration of Microbunch Trains in DLA Structures at SINBAD”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3260-3263.
- A.-S. Mueller, I. Birkel, E. Huttel, F. Perez, M. Pont, and R. Rossmanith, “Linear and Nonlinear Optics Studies in the ANKA Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG043, pp. 3273-3275.
- N. Eddy, J. L. Crisp, S. De Santis, I. Kourbanis, K. Seiya, and R. M. Zwaska, “Measurement of Electron Cloud Development in the Fermilab Main Injector Using Microwave Transmission”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE4GRC02, pp. 1967-1969.
- C. M. Kleffner et al., “Status of the FAIR Proton LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 889-891.
- Y. Otake et al., “Development of the Optical Timing and RF Distribution System for XFEL/SPring-8”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH046, pp. 352-355.
- P. N. Ostroumov, “Heavy Ion Superconducting Linacs: Status and Upgrade Projects”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper THA01, pp. 196-196.
- J. Kim, M. Kim, I. H. Nam, H. Suk, and M. S. Hur, “Numerical Studies on Tunable Coherent Radiations with a Laser-Plasma Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2579-2581.
- A. Marsili, E. B. Holzer, and P. M. Puzo, “LHC Beam Loss Pattern Recognition”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC141, pp. 1353-1355.
- A. Mereghetti et al., “Energy Deposition Studies for the Upgrade of the LHC Injection Lines”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO034, pp. 963-965.
- M. P. Kelly et al., “Production 72 MHz =0.077 Superconducting Quarter-wave Cavities for ATLAS”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper WEC01, pp. 174-174.
- Y. Mori et al., “Present Status of FFAG Proton Accelerator at KURRI”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS077, pp. 2685-2687.
- D. Gex et al., “Engineering Issues of the Medium Energy Beam Transport Line and SRF Linac for the LIPAc”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2377-2379.
- Yu. V. Korotaev, I. N. Meshkov, S. V. Mironov, A. O. Sidorin, and E. Syresin, “The Low Energy Positron Storage Ring for Positronium Generation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP07B, pp. 853-855.
- I. Degl, A. Boccardi, L. Fanucci, and M. Wendt, “Direct Digitization and ADC Parameter Trade-off for Bunch-by-Bunch Signal Processing”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 288-294.
- S. A. Melnikov and I. N. Meshkov, “Stability of Charged Particle Motion in a Storage Ring With Focusing by a Longitudinal Magnetic Field”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 158-160.
- A. Latina, J. Pfingstner, D. Schulte, and E. Adli, “Performance of Linear Collider Beam-Based Alignment Algorithms at FACET”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR029, pp. 1879-1881.
- S. I. Inoue et al., “Beam Monitor System Controller for XFEL/SPring-8”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP069, pp. 534-536.
- N. Milas et al., “Preparation of SLS for IBS Measurements”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC034, pp. 1233-1235.
- H. von Jagwitz-Biegnitz, P. Beasley, O. Heid, D. C. Faircloth, A. J. Holmes, and R. G. Selway, “2D Wire Grid Integrated with Faraday Cup for Low Energy H- Beam Analysis at Siemens Novel Electrostatic Accelerator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF06, pp. 507-510.
- C. Martinella et al., “Radiation Levels at the LHC: 2012, 2015 and 2016 Proton Physics Operations in View of HL-LHC requirements”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2075-2077.
- H. Garcia, A. Latina, and R. Tomas, “Traditional Final Focus System for CLIC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR022, pp. 1858-1860.
- E.-S. Kim et al., “Design Sudy for Front-End System at Rare Isotope Science Project (RISP)”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper THB03, pp. 207-210.
- L. Falbo, “Advanced Accelerator Technology Aspects for Hadron Therapy”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper WEA01, pp. 156-162.
- L. M. Hein, J. Esberg, and M. Jonker, “CLIC Decelerator - Machine Protection”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 482-484.
- W. Bartmann, B. Goddard, A. Kosmicki, M. Kowalska, and F. M. Velotti, “Design Study of a 100 GeV Beam Transfer Line from the SPS for a Short Baseline Neutrino Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI055, pp. 407-409.
Back to search