JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. Baconnier et al., “The CERN PS as e/e- Accelerator in the LEP Injector Chain:  First Results,”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 857-860. 
[n]	H. Bluem et al., “Design of an SRF Gun for Polarized Electron Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP043, pp. 454-454. 
[n]	M. Otani et al., “Development of Muon LINAC for the Muon g-2/EDM Experiment at J-PARC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2541-2544. doi:10.18429/JACoW-IPAC2015-WEPWA023
[n]	H. Y. Al-Omari, U. Ratzinger, and I. Hofmann, “Chromatic, Geometric and Space Charge Effects on Laser Accelerated Protons Focused by a Solenoid”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ002, pp. 2766-2768. 
[n]	J. Mammosser, “SNS & Upgrade”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOODAU01, pp. 62-65. 
[n]	M. Komiyama, N. Fukunishi, A. Uchiyama, M. Wakasugi, M. Hamanaka, and M. Nishimura, “Status of the RIKEN RI Beam Factory Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC103, pp. 348-351. 
[n]	C. Zannini, N. Mounet, E. M?®tral, G. Rumolo, and B. Salvant, “Electromagnetic Simulations of Simple Models of Ferrite Loaded Kickers”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD052, pp. 2045-2047. 
[n]	S. L. Kramer and B. Podobedov, “Coherent Microwave Synchrotron Radiation in the VUV Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI028, pp. 1523-1525. 
[n]	Y. Watanabe et al., “Present Status of RIKEN Ring Cyclotron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD030, pp. 433-435. 
[n]	A. Miller et al., “Bunch Length Measurements with Laser/SR Cross-Correlation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEOCMH03, pp. 2408-2410. 
[n]	S. Bai, J. Gao, and P. Bambade, “Waist Corrections at the Interaction Point of ATF2 in the Presence of IPBSM Fringe Rotations and Input Beam Sigma13, Sigma24”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC023, pp. 1212-1214. 
[n]	R. Lorenz, S. Sabah, and R. Schroeder, “Electronics for the TTFL Cavity-type Beam Position Monitor”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP32G, pp. 1553-1555. 
[n]	K. Yamada et al., “Details Of Beam Diagnostic System For Riken Superconducting Ring Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 325-327. 
[n]	M. Satoh et al., “Commissioning Status and Plan of SuperKEKB Injector Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2013-2015. doi:10.18429/JACoW-IPAC2015-TUPTY008
[n]	R. J. Bakker et al., “Fast and Flexible BPM-System: Valuable Commissioning Tool for the BESSY II”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP29G, pp. 1482-1484. 
[n]	M. I. Bryzgunov et al., “High Efficiency Electron Collector for the High Voltage Electron Cooling System of COSY”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper TUPF08, pp. 112-115. 
[n]	D. Einfeld, “Experience of Academia-industry Collaboration on Accelerator Projects in Europe”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEIRA03, pp. 2452-2455. 
[n]	C. Schultheiss, “Performance of the RHIC Main Power Supply System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA153, pp. 3737-3739. 
[n]	T. H. Luo et al., “Multipacting Study for the RF Test of the MICE 201 MHz RF Cavity at Fermilab MTA”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA26, pp. 1037-1039. 
[n]	A. V. Zlobin, I. Novitski, and R. Yamada, “Quench Protection Analysis of a Single-Aperture 11T Nb3Sn Demonstrator Dipole for LHC Upgrades”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD040, pp. 3599-3601. 
[n]	H. Saito et al., “Crossed-Undulator Configuration for Variable Polarized THz Source”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 69-72. doi:10.18429/JACoW-FEL2019-TUP014
[n]	O. Kamigaito et al., “Present Status and Future Plan of RIKEN RI Beam Factory”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1281-1283. doi:10.18429/JACoW-IPAC2016-TUPMR022
[n]	A. Faus-Golfe and A. Verdier, “Optics Studies for Diffractive Physics at the LHC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE029, pp. 323-325. 
[n]	E. R. Harms et al., “Third Harmonic System at Fermilab/FLASH”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOOBAU01, pp. 11-16. 
[n]	H. Maesaka et al., “Beam Position Monitor at SCSS Prototype Accelerator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA048, pp. 387-389. 
[n]	M. Alabau et al., “Study of Abnormal Vertical Emittance Growth in ATF Extraction Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP003, pp. 553-555. 
[n]	I. V. Gonin et al., “Update of the Mechanical Design of the 650 MHZ =0.9 Cavities for Project X”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO056, pp. 2432-2434. 
[n]	M. L. Mallory, W. S. Chien, and P. S. Miller, “A Quick Change Axial Cold Cathode Heavy Ion Source”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1593-1594. 
[n]	M. Busch et al., “First Measurements on the 325 MHz Superconducting CH Cavity”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB022, pp. 56-58. 
[n]	S. Krinsky, J. Bengtsson, and S. L. Kramer, “Consideration of the Double Bend Achromatic Lattice for NSLS-II”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS090, pp. 3487-3489. 
[n]	V. V. Parkhomchuk and S. Nagaitsev, “Development of Electron Coolers in Novosibirsk”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEXA02, pp. 2068-2072. 
[n]	A. A. Shcherbakov et al., “Progress in Development of Kharkov X-Ray Generator Nestor”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP014, pp. XX-XX. 
[n]	S. J. Li, C. H. Li, J. Liu, H. Wang, and Z. Wang, “Design of the Girder Control System for HEPS-TF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4560-4561. doi:10.18429/JACoW-IPAC2017-THPVA053
[n]	O. Kamigaito et al., “Acceleration of High-Intensity Heavy-Ion Beams at RIKEN RI Beam Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 800-802. doi:10.18429/JACoW-IPAC2014-MOPRI082
[n]	K. Yamada et al., “Beam Commissioning and Operation of New Linac Injector for RIKEN RI-beam Factory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOBA02, pp. 1071-1073. 
[n]	P. Cameron et al., “Beam-Based Alignment in the RHIC eCooling Solenoids”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP043, pp. 2771-2773. 
[n]	S. J. Park et al., “Design Study of Low-Emittance Injector for SASE-XFEL at Pohang Accelerator Laboratory”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS37, pp. XX-XX. 
[n]	H. Tanaka, T. Hara, H. Kitamura, N. Kumagai, and K. Togawa, “Dark Current Suppression at XFEL/SPring-8 by Using the Chromatic Aberration”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP051, pp. 2383-2385. 
[n]	E. R. Harms et al., “Commissioning and First Results from the Fermilab Cryomodule Test Stand”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 185-188. doi:10.18429/JACoW-LINAC2016-MOPLR022
[n]	Y. Kamiya, “A Simple Estimate of Bunch Rotation”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1058-1061. 
[n]	O. Kamigaito et al., “Status of RIBF Accelerators at RIKEN”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper TUM2CIO01, pp. 286-291. 
[n]	H. Maesaka et al., “Stability Improvements of SACLA”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD38, pp. 325-328. 
[n]	S. L. Kramer, J. Bengtsson, and S. Krinsky, “Comparison of Double Bend and Triple Bend Achromatic Lattice Structures for NSLS-II”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS089, pp. 3484-3486. 
[n]	M. Costigliolo, P. Michelato, L. Monaco, and D. Sertore, “Thermal Emittance Estimation Using a Time-Of-Flight Spectrometer”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B18, pp. 1669-1671. 
[n]	F. Y. Wang, C. Adolphsen, and C. D. Nantista, “RF BREAKDOWN IN A GAS-FILLED TE01 CAVITY”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3952-3954. doi:10.18429/JACoW-IPAC2014-THPRI079
[n]	N. Sakamoto, O. Kamigaito, Y. Miyazawa, T. Mitsumoto, A. Goto, and Y. Yano, “Construction of the RF-Resonator for the RIKEN Intermediate-Stage Ring Cyclotron (IRC)”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-23, pp. XX-XX. 
[n]	Ju. Bylinsky, S. Esin, A. Feschenko, P. Ostroumov, and S. Zharylkapov, “Experiments Connected with Tuning of the Drift Tube Cavities Stabilized with Post Couplers”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-45, pp. 158-160. 
[n]	M. Otani et al., “APF IH-DTL Design for the Muon LINAC in the J-PARC Muon g-2/EDM Experiment”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1539-1542. doi:10.18429/JACoW-IPAC2016-TUPMY002
[n]	H. J. Zheng et al., “HOM Parameters Simulation and Measurement Result of the IHEP02 Low-loss Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO026, pp. 2372-2374. 
[n]	W. Zhang, L. A. Ahrens, J. L. Mi, B. Oerter, J. Sandberg, and R. Sanders, “RHIC Beam Abort Kicker Power Supply System Commissioning Experience and Remaining Issues”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH021, pp. 3711-3713. 
[n]	J. Resta-Lopez, A. Faus-Golfe, and F. Zimmermann, “LHC Impedance Reduction by Nonlinear Collimation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN085, pp. 1571-1573. 
[n]	A. V. Butenko et al., “Development of the NICA Injection Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO069, pp. 3915-3917. 
[n]	A. V. Bubley, M. I. Bryzgunov, V. M. Panasyuk, V. V. Parkhomchuk, and V. B. Reva, “Low Energy Cooler for NICA Booster”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB034, pp. 391-393. 
[n]	C. D. Nantista, C. Adolphsen, G. B. Bowden, A. A. Haase, B. D. McKee, and F. W. Wang, “Waveguide Component R&D for the ILC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI080, pp. 2881-2883. 
[n]	D. Metin, A. Goldblatt, C. Vuitton, F. Roncarolo, M. Duraffourg, and M. Hamani, “Performance of Titanium, Tungsten, and Carbon as Beam Profile Monitor Materials”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 452-456. doi:10.18429/JACoW-IBIC2025-TUPMO03
[n]	D. Einfeld, “Status of the ALBA Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP020, pp. 1135-1137. 
[n]	W. Herr, T. Limberg, J. Miles, and R. Schmidt, “A New Closed Orbit Correction Procedure for the CERN SPS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1681-1684. 
[n]	R. Hajima et al., “Generation of Coherent Synchrotron Radiation from JAERI-ERL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP035, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search