Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. T. Touchard et al., “The Spiral2 Command Control Software Organisation and Management.”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP014, pp. 703-705.
[n] A. R. D. Rodrigues and D. Wisnivesky, “Commissioning of the LNLS Injector LINAC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 535-538.
[n] T. T. Nakamura, “Application of a Simple Text Format as a Device Configuration File”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP013, pp. 432-434.
[n] M. Arlandoo, P. Goslawski, and M. Titze, “A First attempt at implementing TRIBs in BESSY IIIÔÇÖs Design Lattice”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2560-2563. doi:10.18429/JACoW-IPAC2022-THPOPT003
[n] M. K. Bock et al., “Benchmarking the Performance of the Present Bunch Arrival Time Monitors at FLASH”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD28, pp. 365-367.
[n] K. H. Park, D. E. Kim, B. K. Kang, J. S. Chai, Y. S. Kim, and I. S. Jung, “Current Mode Transimpedance Amplifier for Beam Current Measurement”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP13002, pp. XX-XX.
[n] I. S. Jung et al., “Design of the RF System for 30 MeV Cyclotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH137, pp. 1340-1342.
[n] X. J. Liu et al., “Sector Focused Cyclotron Power Supply Control System Upgrade”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper MOPHA083, pp. XX-XX.
[n] Y. Yuri, I. Ishibori, T. Ishizaka, S. Okumura, K. Yoshida, and T. Yuyama, “Formation of a Uniform Ion Beam Based on Nonlinear Focusing and its Applications at the JAEA TIARA Cyclotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 236-238. doi:10.18429/JACoW-IPAC2015-MOPWA052
[n] A. Masi, R. Losito, and S. Redaelli, “Measured Performance of the LHC Collimators Low Level Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WED001, pp. 612-614.
[n] M. Arlandoo and P. Goslawski, “Further investigations of TRIBs in BESSY III design MBA lattices”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3363-3366. doi:10.18429/JACoW-IPAC2023-WEPL109
[n] L. Shaw and C. D. Ziomek, “Off-the-shelf EPICS Instrumentation for Remote Waveform Monitoring & Analysis”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE082, pp. 1173-1175.
[n] C. C. Shang et al., “BBU Design of Linear Induction Accelerator Cells for Radiography Application”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P109, pp. 2633-2635.
[n] U. Mavric, M. Felber, C. Gerth, H. Schlarb, W. Jalmuzna, and A. Piotrowski, “Preliminary Measurement Results of the Upgraded Energy BPM at FLASH”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR017, pp. 813-815.
[n] F. Lemery, H. Panuganti, P. Piot, D. Mihalcea, and P. Stoltz, “THz Bench Tests of a Slab-symmetric Dielectric Waveguide”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA071, pp. 1292-1294.
[n] R. M. Silzer, R. Berg, J. C. Bergstrom, L. Dallin, X. Shen, and J. M. Vogt, “Injection System for the Canadian Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF008, pp. 2272-2274.
[n] E. Sombrowski and K. Rehlich, “First Experiences with jddd for PETRA Vacuum Controls”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUZ04, pp. 74-76.
[n] V. Le Flanchec and P. Balleyguier, “A Phased-locked S.A.M. Mode-locked Laser for the ELSA Photoinjector”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH158, pp. 3164-3166.
[n] S. Korenev, “The Concept of Beam Lines from Rhodotron for Radiation Technologies”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB092, pp. 1015-1016.
[n] A. Pires, A.-S. Chauchat, M. Collet, V. Le Flanchec, and N. Delerue, “Emittance growth study of an electron beam in a double-alpha magnet compressor used in an Inverse Compton Scattering X-ray source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2154-2157. doi:10.18429/JACoW-IPAC2023-TUPL172
[n] K.-H. Park et al., “The Magnet Power Supply for PAL-XFEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 504-507. doi:10.18429/JACoW-IPAC2014-MOPME058
[n] Z. L. Zhang et al., “Design of a Four-Vane RFQ for China ADS Project”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB039, pp. 942-944.
[n] T. Lamb et al., “Development of an Alternative, Photodiode-Based, Femtosecond Stable Detection Principle for the Link Stabilization in the Optical Synchronization Systems at FLASH and XFEL”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD35, pp. 380-382.
[n] E. Lecorche et al., “Development of the Future Spiral2 Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP076, pp. 257-259.
[n] L. Dallin et al., “Canadian Light Source Status and Commissioning Results”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF007, pp. 2269-2271.
[n] I. B. Vasserman, “Test of Horizontal Magnetic Field Measurements in the Presence of a Strong Vertical Field”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS51, pp. XX-XX.
[n] M. A. Belikhin, A. P. Chernyaev, A. A. Pryanichnikov, and A. E. Shemyakov, “Experimental Simulation of Volume Repainting Technique at Proton Synchrotron in Context of Spot Scanning Proton Therapy”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 192-195. doi:10.18429/JACoW-RuPAC2021-MOPSA45
For LaTeX
Use Complete Form
For BibTeX
References
- D. T. Touchard et al., “The Spiral2 Command Control Software Organisation and Management.”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP014, pp. 703-705.
- A. R. D. Rodrigues and D. Wisnivesky, “Commissioning of the LNLS Injector LINAC”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 535-538.
- T. T. Nakamura, “Application of a Simple Text Format as a Device Configuration File”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP013, pp. 432-434.
- M. Arlandoo, P. Goslawski, and M. Titze, “A First attempt at implementing TRIBs in BESSY IIIÔÇÖs Design Lattice”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2560-2563.
- M. K. Bock et al., “Benchmarking the Performance of the Present Bunch Arrival Time Monitors at FLASH”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD28, pp. 365-367.
- K. H. Park, D. E. Kim, B. K. Kang, J. S. Chai, Y. S. Kim, and I. S. Jung, “Current Mode Transimpedance Amplifier for Beam Current Measurement”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP13002, pp. XX-XX.
- I. S. Jung et al., “Design of the RF System for 30 MeV Cyclotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH137, pp. 1340-1342.
- X. J. Liu et al., “Sector Focused Cyclotron Power Supply Control System Upgrade”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper MOPHA083, pp. XX-XX.
- Y. Yuri, I. Ishibori, T. Ishizaka, S. Okumura, K. Yoshida, and T. Yuyama, “Formation of a Uniform Ion Beam Based on Nonlinear Focusing and its Applications at the JAEA TIARA Cyclotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 236-238.
- A. Masi, R. Losito, and S. Redaelli, “Measured Performance of the LHC Collimators Low Level Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WED001, pp. 612-614.
- M. Arlandoo and P. Goslawski, “Further investigations of TRIBs in BESSY III design MBA lattices”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL109, pp. 3363-3366.
- L. Shaw and C. D. Ziomek, “Off-the-shelf EPICS Instrumentation for Remote Waveform Monitoring & Analysis”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE082, pp. 1173-1175.
- C. C. Shang et al., “BBU Design of Linear Induction Accelerator Cells for Radiography Application”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P109, pp. 2633-2635.
- U. Mavric, M. Felber, C. Gerth, H. Schlarb, W. Jalmuzna, and A. Piotrowski, “Preliminary Measurement Results of the Upgraded Energy BPM at FLASH”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR017, pp. 813-815.
- F. Lemery, H. Panuganti, P. Piot, D. Mihalcea, and P. Stoltz, “THz Bench Tests of a Slab-symmetric Dielectric Waveguide”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA071, pp. 1292-1294.
- R. M. Silzer, R. Berg, J. C. Bergstrom, L. Dallin, X. Shen, and J. M. Vogt, “Injection System for the Canadian Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF008, pp. 2272-2274.
- E. Sombrowski and K. Rehlich, “First Experiences with jddd for PETRA Vacuum Controls”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUZ04, pp. 74-76.
- V. Le Flanchec and P. Balleyguier, “A Phased-locked S.A.M. Mode-locked Laser for the ELSA Photoinjector”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH158, pp. 3164-3166.
- S. Korenev, “The Concept of Beam Lines from Rhodotron for Radiation Technologies”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB092, pp. 1015-1016.
- A. Pires, A.-S. Chauchat, M. Collet, V. Le Flanchec, and N. Delerue, “Emittance growth study of an electron beam in a double-alpha magnet compressor used in an Inverse Compton Scattering X-ray source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL172, pp. 2154-2157.
- K.-H. Park et al., “The Magnet Power Supply for PAL-XFEL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 504-507.
- Z. L. Zhang et al., “Design of a Four-Vane RFQ for China ADS Project”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB039, pp. 942-944.
- T. Lamb et al., “Development of an Alternative, Photodiode-Based, Femtosecond Stable Detection Principle for the Link Stabilization in the Optical Synchronization Systems at FLASH and XFEL”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD35, pp. 380-382.
- E. Lecorche et al., “Development of the Future Spiral2 Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP076, pp. 257-259.
- L. Dallin et al., “Canadian Light Source Status and Commissioning Results”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF007, pp. 2269-2271.
- I. B. Vasserman, “Test of Horizontal Magnetic Field Measurements in the Presence of a Strong Vertical Field”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS51, pp. XX-XX.
- M. A. Belikhin, A. P. Chernyaev, A. A. Pryanichnikov, and A. E. Shemyakov, “Experimental Simulation of Volume Repainting Technique at Proton Synchrotron in Context of Spot Scanning Proton Therapy”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 192-195.
Back to search