Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Kramer, M. Benedikt, B. Goddard, and H. Vincke, “Design Considerations for the PS2 Beam Dumps”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP088, pp. 3569-3571.
[n] S. Noguchi et al., “Development of 2-Cell SC Cavity System for ERL Injector Linac at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP071, pp. 987-989.
[n] H. Dzitko et al., “Design and Manufacturing Status of the IFMIF-LIPAC SRF LINAC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3686-3688. doi:10.18429/JACoW-IPAC2015-THPF006
[n] M. Sapinski et al., “Beam Induced Quenches of LHC Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA045, pp. 3243-3245.
[n] K. Brown and S. Biedron, “Summary of the 3rd ICFA Beam Dynamics Mini-Workshop on Machine Learning Applications for Particle Accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4440-4443. doi:10.18429/JACoW-IPAC2023-THPL010
[n] G. Marcus et al., “Full Temporal Reconstruction using an Advanced Longitudinal Diagnostic at the SPARC FEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC100, pp. 3119-3121.
[n] C. R. Hoffmann and J. F. Mouris, “Development and Performance of Electrostatic Deflector Insulators for the Chalk River Superconducting Cyclotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2337-2340.
[n] F. Peauger et al., “Status and First Results of Two High Beta Prototype Elliptical Cavities for ESS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2477-2479. doi:10.18429/JACoW-IPAC2014-WEPRI002
[n] S. W. Jang, H. Hayano, and E.-S. Kim, “Development of L-band Cavity BPM for STF”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2547-2549. doi:10.18429/JACoW-IPAC2019-WEPGW034
[n] M. G. Giacchini, L. Antoniazzi, M. Montis, and A. Marqueta Barbero, “IFMIF EVEDA RFQ Local Control System to Power Tests”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC016, pp. 89-92.
[n] E. Fagotti et al., “Installation and Low Power Test of IFMIF-EVEDA RFQ at Rokkasho Site”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4162-4165. doi:10.18429/JACoW-IPAC2017-THPIK032
[n] E. M, “Stability of the Longitudinal Bunched-Beam Coherent Dipole Mode”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15024, pp. XX-XX.
[n] H. Koivisto, P. Heikkinen, K. Ranttila, J. ?ärje, and E. Liukkonen, “Development Work with the JYFL ECR Ion Sources”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-02, pp. XX-XX.
[n] M. Kuriki et al., “1ms Multi-bunch Electron Beam Acceleration by a Normal Conducting RF Gun and Superconducting Accelerator”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB025, pp. 228-230.
[n] C. S. Søndergaard et al., “Charged Particle Beam Profile Detector based on Yb-doped Optical Fibers”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC066, pp. 1150-1152.
[n] M. G. Giacchini et al., “Hyperarchiver: An Epics Archiver Prototype Based on Hypertable”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN012, pp. 114-116.
[n] M.-A. Tordeux, F. Dohou, M. Labat, and O. Marcouillé, “Bunch Length Measurements from the Incoherent Synchrotron Radiation Fluctuation at SOLEIL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC069, pp. 1159-1161.
[n] G. Bellodi et al., “First Ion Collimation Commissioning Results at the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ007, pp. 1813-1815.
[n] A. Fallahi et al., “Complete Simulation of Laser Induced Field Emission from Nanostructures Using a DGTD, PIC and FEM Code”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 645-648. doi:10.18429/JACoW-IPAC2014-MOPRI026
For LaTeX
Use Complete Form
For BibTeX
References
- T. Kramer, M. Benedikt, B. Goddard, and H. Vincke, “Design Considerations for the PS2 Beam Dumps”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP088, pp. 3569-3571.
- S. Noguchi et al., “Development of 2-Cell SC Cavity System for ERL Injector Linac at KEK”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP071, pp. 987-989.
- H. Dzitko et al., “Design and Manufacturing Status of the IFMIF-LIPAC SRF LINAC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3686-3688.
- M. Sapinski et al., “Beam Induced Quenches of LHC Magnets”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA045, pp. 3243-3245.
- K. Brown and S. Biedron, “Summary of the 3rd ICFA Beam Dynamics Mini-Workshop on Machine Learning Applications for Particle Accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL010, pp. 4440-4443.
- G. Marcus et al., “Full Temporal Reconstruction using an Advanced Longitudinal Diagnostic at the SPARC FEL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC100, pp. 3119-3121.
- C. R. Hoffmann and J. F. Mouris, “Development and Performance of Electrostatic Deflector Insulators for the Chalk River Superconducting Cyclotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2337-2340.
- F. Peauger et al., “Status and First Results of Two High Beta Prototype Elliptical Cavities for ESS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2477-2479.
- S. W. Jang, H. Hayano, and E.-S. Kim, “Development of L-band Cavity BPM for STF”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2547-2549.
- M. G. Giacchini, L. Antoniazzi, M. Montis, and A. Marqueta Barbero, “IFMIF EVEDA RFQ Local Control System to Power Tests”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC016, pp. 89-92.
- E. Fagotti et al., “Installation and Low Power Test of IFMIF-EVEDA RFQ at Rokkasho Site”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4162-4165.
- E. M, “Stability of the Longitudinal Bunched-Beam Coherent Dipole Mode”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15024, pp. XX-XX.
- H. Koivisto, P. Heikkinen, K. Ranttila, J. ?ärje, and E. Liukkonen, “Development Work with the JYFL ECR Ion Sources”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-02, pp. XX-XX.
- M. Kuriki et al., “1ms Multi-bunch Electron Beam Acceleration by a Normal Conducting RF Gun and Superconducting Accelerator”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB025, pp. 228-230.
- C. S. Søndergaard et al., “Charged Particle Beam Profile Detector based on Yb-doped Optical Fibers”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC066, pp. 1150-1152.
- M. G. Giacchini et al., “Hyperarchiver: An Epics Archiver Prototype Based on Hypertable”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN012, pp. 114-116.
- M.-A. Tordeux, F. Dohou, M. Labat, and O. Marcouillé, “Bunch Length Measurements from the Incoherent Synchrotron Radiation Fluctuation at SOLEIL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC069, pp. 1159-1161.
- G. Bellodi et al., “First Ion Collimation Commissioning Results at the LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ007, pp. 1813-1815.
- A. Fallahi et al., “Complete Simulation of Laser Induced Field Emission from Nanostructures Using a DGTD, PIC and FEM Code”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 645-648.
Back to search