Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. E. Balakin, A. N. Skrinsky, V. P. Smirnov, and Yu. D. Valyaev, “TRAPP-Facility for Proton Therapy of Cancer”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1505-1506.
[n] D. Alesini et al., “The New C Band Gun for the Next Generation RF Photo-Injectors”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 679-682. doi:10.18429/JACoW-IPAC2022-MOPOMS021
[n] A. V. Shemyakin et al., “Status of the Warm Front End of PIP-II Injector Test”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2421-2424. doi:10.18429/JACoW-IPAC2017-TUPVA138
[n] R. F. Holsinger, “Permanent Magnet Beam Transport”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE07, pp. 1305-1309.
[n] K. P. Wootton et al., “The Advanced Photon Source Linac Extension Area Beamline”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 430-432. doi:10.18429/JACoW-NAPAC2022-TUPA36
[n] V. L. Auslender, V. G. Cheskidov, V. E. Nekhaev, A. D. Panfilov, V. A. Poliakov, and A. A. Tuvik, “The High-Frequency Electron Accelerator for the Use in Industrial Technological Lines”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1480-1483.
[n] S. Zheng, H. Chen, Y. Cui, and L. Xiao, “A Quantitative Method of Coupler Cavity Tuning and Simulation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH091, pp. 981-983.
[n] A. V. Shemyakin et al., “Status of the Warm Front End of PXIE”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP056, pp. 976-978.
[n] G. Guignard and G. von Holtey, “Current Tolerances for LEP Magnet Power Converters”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2538-2541.
[n] G. Mayer, S. Beck, and R. Pasquinelli, “Control of Stochastic Cooling & RF Systems Using Interactive Graphics”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 738-741.
[n] M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “A Pulse Sequencer for the KAON Factory Beam Chopper”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1148-1151.
[n] H. Loos et al., “Temporal E-Beam Shaping in an S-Band Accelerator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPB008, pp. 642-644.
[n] A. L. Li, Z. Peng, and J. Zheng, “Design and Implementation of Superconducting Booster Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1293. doi:10.18429/JACoW-ICALEPCS2019-WEPHA089
[n] A. Bignami, N. Gazis, S. Ghatnekar Nilsson, and B. Nicquevert, “Analysis with MECAmaster on the Chain of Design Tolerances for the Target Systems at the European Spallation Source - ESS”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2524-2526. doi:10.18429/JACoW-IPAC2022-THPOST037
[n] N. E. Vinogradov et al., “Development of Room Temperature Accelerating Structures for the RIA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB030, pp. 2790-2792.
[n] E.-C. Huang, P. Anisimov, and L. Rybarcyk, “Benchmarking HPSim with the LANSCE Linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2480-2482. doi:10.18429/JACoW-IPAC2023-TUPM112
[n] S. Choroba, F. Eints, T. Frölich, A. Gamp, T. Grevsmühl, and V. V. Katalev, “Operation Experience with the FLASH RF Waveguide Distribution System at DESY”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP079, pp. 978-980.
[n] F. Novoskoltsev, A. Ostankov, and A. Kurilin, “KL BEAM LINE AT INSTITUTE FOR HIGH ENERGY PHYSICS (U-70 ACCELERATOR, PROTVINO), CALCULATED PARAMETERS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THLP09, pp. XX-XX.
[n] S. Suhring, “Accelerator Availability and Reliability Issues”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB007, pp. 625-629.
[n] R. C. Webber et al., “FNAL HINS Beam Measurements and the Future of High Intensity Linac Instrumentation”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP001, pp. 755-757.
[n] H. Z. Ma, J. S. Cao, Y. F. Sui, and Q. Ye, “Status of BPMs In the First Stage of Commissioning at CADS Injector I”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 390-392. doi:10.18429/JACoW-IBIC2015-TUPB028
[n] G. Jackson, “Measurement of the Resistive Wall Instability in the Fermilab Main Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1755-1758.
[n] S. K. Schaffner and K. S. White, “Software Engineering Practices for Control System Reliability”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP32, pp. 729-731.
[n] E. Syresin et al., “NICA Synchrotrons and their Cooling Systems”, in Proc. COOL'21, Novosibirsk, Russia, Nov. 2021, paper S101, pp. 1-5.
For LaTeX
Use Complete Form
For BibTeX
References
- V. E. Balakin, A. N. Skrinsky, V. P. Smirnov, and Yu. D. Valyaev, “TRAPP-Facility for Proton Therapy of Cancer”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1505-1506.
- D. Alesini et al., “The New C Band Gun for the Next Generation RF Photo-Injectors”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 679-682.
- A. V. Shemyakin et al., “Status of the Warm Front End of PIP-II Injector Test”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2421-2424.
- R. F. Holsinger, “Permanent Magnet Beam Transport”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE07, pp. 1305-1309.
- K. P. Wootton et al., “The Advanced Photon Source Linac Extension Area Beamline”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 430-432.
- V. L. Auslender, V. G. Cheskidov, V. E. Nekhaev, A. D. Panfilov, V. A. Poliakov, and A. A. Tuvik, “The High-Frequency Electron Accelerator for the Use in Industrial Technological Lines”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1480-1483.
- S. Zheng, H. Chen, Y. Cui, and L. Xiao, “A Quantitative Method of Coupler Cavity Tuning and Simulation”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH091, pp. 981-983.
- A. V. Shemyakin et al., “Status of the Warm Front End of PXIE”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP056, pp. 976-978.
- G. Guignard and G. von Holtey, “Current Tolerances for LEP Magnet Power Converters”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2538-2541.
- G. Mayer, S. Beck, and R. Pasquinelli, “Control of Stochastic Cooling & RF Systems Using Interactive Graphics”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 738-741.
- M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “A Pulse Sequencer for the KAON Factory Beam Chopper”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1148-1151.
- H. Loos et al., “Temporal E-Beam Shaping in an S-Band Accelerator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPB008, pp. 642-644.
- A. L. Li, Z. Peng, and J. Zheng, “Design and Implementation of Superconducting Booster Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1293.
- A. Bignami, N. Gazis, S. Ghatnekar Nilsson, and B. Nicquevert, “Analysis with MECAmaster on the Chain of Design Tolerances for the Target Systems at the European Spallation Source - ESS”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2524-2526.
- N. E. Vinogradov et al., “Development of Room Temperature Accelerating Structures for the RIA”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB030, pp. 2790-2792.
- E.-C. Huang, P. Anisimov, and L. Rybarcyk, “Benchmarking HPSim with the LANSCE Linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM112, pp. 2480-2482.
- S. Choroba, F. Eints, T. Frölich, A. Gamp, T. Grevsmühl, and V. V. Katalev, “Operation Experience with the FLASH RF Waveguide Distribution System at DESY”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP079, pp. 978-980.
- F. Novoskoltsev, A. Ostankov, and A. Kurilin, “KL BEAM LINE AT INSTITUTE FOR HIGH ENERGY PHYSICS (U-70 ACCELERATOR, PROTVINO), CALCULATED PARAMETERS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THLP09, pp. XX-XX.
- S. Suhring, “Accelerator Availability and Reliability Issues”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPB007, pp. 625-629.
- R. C. Webber et al., “FNAL HINS Beam Measurements and the Future of High Intensity Linac Instrumentation”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP001, pp. 755-757.
- H. Z. Ma, J. S. Cao, Y. F. Sui, and Q. Ye, “Status of BPMs In the First Stage of Commissioning at CADS Injector I”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 390-392.
- G. Jackson, “Measurement of the Resistive Wall Instability in the Fermilab Main Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1755-1758.
- S. K. Schaffner and K. S. White, “Software Engineering Practices for Control System Reliability”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP32, pp. 729-731.
- E. Syresin et al., “NICA Synchrotrons and their Cooling Systems”, in Proc. 13th Workshop on Beam Cooling and Related Topics (COOL'21), Novosibirsk, Russia, Nov. 2021, paper S101, pp. 1-5.
Back to search