Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Danisi, R. Losito, A. Masi, B. Salvant, and C. Zannini, “Theoretical Analysis of Metamaterial Insertions for Resistive-wall Beam-coupling Impedance Reduction”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1695-1697. doi:10.18429/JACoW-IPAC2014-TUPRI055
[n] T. Ota et al., “Development of HOM Absorbers for CW Superconducting Cavities in Energy Recovery Linac”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1060-1062. doi:10.18429/JACoW-SRF2019-THP072
[n] K. Sato et al., “Design and Operation of the HIMAC Injector”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1686-1689.
[n] S. Ninomiya, T. Saito, H. Tamura, and K. Sato, “RCNP Techniques for Producing Ultra-Precise Beams”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper F-3, pp. XX-XX.
[n] M. Borland, C. Doose, A. Jain, M. Jaski, and R. Lindberg, “Use of two- and three-dimensional magnetic measurement data to refine the APS upgrade model”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPC03, unpublished.
[n] N. M. Lockmann, C. Gerth, B. Schmidt, and S. Wesch, “Non-invasive Longitudinal Profile Measurements of Electron Bunches Simultaneously to FEL Operation at MHz Rates”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper WEAO04, unpublished.
[n] M. Borland, M. Jaski, and A. Jain, “Estimates of cross-talk effects for magnets of the Advanced Photon Source upgrade lattice”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPC02, unpublished.
[n] H. Huang et al., “Simulation of the simple feedback system for the mitigation of the cavity RF noise effects in EIC HSR”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3221-3224. doi:10.18429/JACoW-IPAC2024-THPC79
[n] B. Lindstrom et al., “Machine Protection Experience from Beam Tests with Crab Cavity Prototypes in the CERN SPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 520-523. doi:10.18429/JACoW-IPAC2019-MOPMP036
[n] W. Duckitt and J. K. Abraham, “OPC UA EPICS Bridge”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 681-684. doi:10.18429/JACoW-ICALEPCS2023-TUPDP075
[n] L. Huang, H. Liu, Y. Liu, S. Wang, and S. Xu, “Simulation and measurement of beam loading effects in magnetic alloy RF cavity of CSNS RCS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1687-1690. doi:10.18429/JACoW-IPAC2023-TUPA164
[n] J. Wan, S. Zhao, Y. Hao, W. Chang, and H. Ao, “Machine learning enabled model predictive control of the FRIB RFQ”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1798-1799. doi:10.18429/JACoW-IPAC2024-TUPS57
[n] A. Ratti and T. J. Shea, “Bench Measurements of Coupling Impedance of AGS Booster Components”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1803-1806.
[n] W. Duckitt and J. K. Abraham, “React Automation Studio: A New Face to Control Large Scientific Equipment”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 285-288. doi:10.18429/JACoW-CYCLOTRONS2019-THA03
[n] T. Fanselow et al., “Operational Experience in the Treatment of Ocular Melanomas with a New Digital Low-level RF Control System”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 162-165. doi:10.18429/JACoW-CYCLOTRONS2019-TUP007
[n] L. R. Doolittle et al., “Linac Design for the FERMI Project”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP015, pp. 61-63.
[n] D. W. Dotson and D. J. Seidman, “Beam Loss Ion Chamber System Upgrade for Experimental Halls”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE065, pp. 3650-3652.
[n] M. Rossetti Conti, A. Bacci, D. Giove, S. Samsam, L. Serafini, and D. Sertore, “Achromatic low energy merger for energy recovery linacs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 81-84. doi:10.18429/JACoW-IPAC2023-MOPA019
For LaTeX
Use Complete Form
For BibTeX
References
- A. Danisi, R. Losito, A. Masi, B. Salvant, and C. Zannini, “Theoretical Analysis of Metamaterial Insertions for Resistive-wall Beam-coupling Impedance Reduction”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1695-1697.
- T. Ota et al., “Development of HOM Absorbers for CW Superconducting Cavities in Energy Recovery Linac”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1060-1062.
- K. Sato et al., “Design and Operation of the HIMAC Injector”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1686-1689.
- S. Ninomiya, T. Saito, H. Tamura, and K. Sato, “RCNP Techniques for Producing Ultra-Precise Beams”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper F-3, pp. XX-XX.
- M. Borland, C. Doose, A. Jain, M. Jaski, and R. Lindberg, “Use of two- and three-dimensional magnetic measurement data to refine the APS upgrade model”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC03, unpublished.
- N. M. Lockmann, C. Gerth, B. Schmidt, and S. Wesch, “Non-invasive Longitudinal Profile Measurements of Electron Bunches Simultaneously to FEL Operation at MHz Rates”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper WEAO04, unpublished.
- M. Borland, M. Jaski, and A. Jain, “Estimates of cross-talk effects for magnets of the Advanced Photon Source upgrade lattice”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC02, unpublished.
- H. Huang et al., “Simulation of the simple feedback system for the mitigation of the cavity RF noise effects in EIC HSR”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC79, pp. 3221-3224.
- B. Lindstrom et al., “Machine Protection Experience from Beam Tests with Crab Cavity Prototypes in the CERN SPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 520-523.
- W. Duckitt and J. K. Abraham, “OPC UA EPICS Bridge”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP075, pp. 681-684.
- L. Huang, H. Liu, Y. Liu, S. Wang, and S. Xu, “Simulation and measurement of beam loading effects in magnetic alloy RF cavity of CSNS RCS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA164, pp. 1687-1690.
- J. Wan, S. Zhao, Y. Hao, W. Chang, and H. Ao, “Machine learning enabled model predictive control of the FRIB RFQ”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS57, pp. 1798-1799.
- A. Ratti and T. J. Shea, “Bench Measurements of Coupling Impedance of AGS Booster Components”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1803-1806.
- W. Duckitt and J. K. Abraham, “React Automation Studio: A New Face to Control Large Scientific Equipment”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 285-288.
- T. Fanselow et al., “Operational Experience in the Treatment of Ocular Melanomas with a New Digital Low-level RF Control System”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 162-165.
- L. R. Doolittle et al., “Linac Design for the FERMI Project”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP015, pp. 61-63.
- D. W. Dotson and D. J. Seidman, “Beam Loss Ion Chamber System Upgrade for Experimental Halls”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE065, pp. 3650-3652.
- M. Rossetti Conti, A. Bacci, D. Giove, S. Samsam, L. Serafini, and D. Sertore, “Achromatic low energy merger for energy recovery linacs”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA019, pp. 81-84.
Back to search