Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Yan, C. Wang, Z. Wang, L. Zhao, and Y. Zhu, “The Beamline Experiments Scheduling Software”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL003, pp. 33-35.
[n] X. Serra-Gallifa et al., “Harmony: A Generic FPGA Based Solution for Flexible Feedback Systems”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 141-144. doi:10.18429/JACoW-PCAPAC2016-FRFMPLCO06
[n] C. E. Adolphsen et al., “Beam-Based Alignment Technique for the SLC Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 977-980.
[n] D. P. Piso et al., “ESS PLC Controls Strategy”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3066-3068. doi:10.18429/JACoW-IPAC2015-WEPMN061
[n] N. Pupeter et al., “A Modular Digital LLRF Control System for Normal as well as Superconducting RF Accelerators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP072, pp. 2174-2176.
[n] R. Kramert et al., “Dynamic Alignment at SLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A17, pp. 693-695.
[n] S. Liu et al., “First results of the Hard X-Ray Self-Seeding Commissioning at the European XFEL”, in Proc. IPAC'20, Caen, France, May 2020, paper MOVIR09, pp. XX-XX.
[n] R. Reimers, J. Haley, and G. Hampton, “184-Inch Synchrocyclotron Decommissioning”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1605-1608.
[n] E. Boggasch et al., “Plasma Lenses for Heavy Ion Beam Focusing”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 596-599.
[n] D. J. Martin, S. Allison, B. Scott, J. J. Sebek, and T. A. Trautwein, “Evaluation of Bergoz Instrumentation NPCT”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP034, pp. 4021-4023.
[n] O. Brovko et al., “Conceptual Design of a 240 MeV Superferric Separated Orbit Cyclotron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP4, pp. 2262-2264.
[n] V. G. Khachatryan, W. Decking, A. Tarloyan, and V. M. Tsakanov, “Effect of Jitter and Quadrupole Alignment Errors on SASE FEL Performance”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC013, pp. 94-96.
[n] A. V. Tsakanian, G. A. Amatuni, B. Grigoryan, I. N. Margaryan, and V. M. Tsakanov, “Coupler Kick and Cavity Tilt Effects on Emittance Preservation in Linear Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4013-4015. doi:10.18429/JACoW-IPAC2014-THPRI101
[n] U. Beck et al., “SPEAR 3 - A Low Emittance Source for SSRL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUCL6, pp. 206-208.
[n] A. Gottstein, E. Kasanda, I. Mateu, L. Eggimann, and S. Braccini, “Upgraded beam profile monitoring using Chromox and fiber optic imaging for high-radiation environments”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 499-502. doi:10.18429/JACoW-IBIC2025-TUPMO16
[n] N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
[n] E. M. Laziev and G. G. Oxuzian, “Radio-Frequency Radiation of High Energy Electrons”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0027, pp. 400-402.
[n] B. Deriy, M. S. Jaski, and J. Wang, “A New Power Supply System for the IEX Project at the APS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP188, pp. 1178-1180.
[n] H. Braun, A. V. Kulikov, R. Pitthan, and M. Woodley, “Nonlinear Effects in the SLC e Transport Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1845-1848.
[n] V. V. Kolotiy et al., “The Kiev 240 cm Isochronous Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 87-95.
[n] K. C. Liao, O. Brunner, E. Ciapala, T. Junginger, and W. Weingarten, “Second Sound Measurement Using SMD Resistors to Simulate Quench Locations on the 704 MHz Single-cell Cavity at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC030, pp. 2269-2271.
[n] A. S. Chepurnov et al., “CANopen Connected Power Supply Control Systems for the Electron Linacs”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB041, pp. 266-268.
[n] P. Leban, C. Pradervand, and D. T. Tinta, “Photon Beam Position Measurements using CVD Diamond based Beam Position Sensor and Libera Photon at Swiss Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE047, pp. 1077-1079.
[n] W.L Zhan, “PROGRESS OF THE HEAVY ION RESEARCH FACILITY IN LANZHOU”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18A2, pp. XX-XX.
[n] O. Karamyshev et al., “Beam Tracking Simulation for SC200 Superconducting Cyclotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1268-1270. doi:10.18429/JACoW-IPAC2016-TUPMR018
[n] Y. Yano, “RI BEAM FACTORY PROJECT AT RIKEN”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18A1, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Yan, C. Wang, Z. Wang, L. Zhao, and Y. Zhu, “The Beamline Experiments Scheduling Software”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL003, pp. 33-35.
- X. Serra-Gallifa et al., “Harmony: A Generic FPGA Based Solution for Flexible Feedback Systems”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 141-144.
- C. E. Adolphsen et al., “Beam-Based Alignment Technique for the SLC Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 977-980.
- D. P. Piso et al., “ESS PLC Controls Strategy”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3066-3068.
- N. Pupeter et al., “A Modular Digital LLRF Control System for Normal as well as Superconducting RF Accelerators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP072, pp. 2174-2176.
- R. Kramert et al., “Dynamic Alignment at SLS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A17, pp. 693-695.
- S. Liu et al., “First results of the Hard X-Ray Self-Seeding Commissioning at the European XFEL”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOVIR09, pp. XX-XX.
- R. Reimers, J. Haley, and G. Hampton, “184-Inch Synchrocyclotron Decommissioning”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1605-1608.
- E. Boggasch et al., “Plasma Lenses for Heavy Ion Beam Focusing”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 596-599.
- D. J. Martin, S. Allison, B. Scott, J. J. Sebek, and T. A. Trautwein, “Evaluation of Bergoz Instrumentation NPCT”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP034, pp. 4021-4023.
- O. Brovko et al., “Conceptual Design of a 240 MeV Superferric Separated Orbit Cyclotron”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP4, pp. 2262-2264.
- V. G. Khachatryan, W. Decking, A. Tarloyan, and V. M. Tsakanov, “Effect of Jitter and Quadrupole Alignment Errors on SASE FEL Performance”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC013, pp. 94-96.
- A. V. Tsakanian, G. A. Amatuni, B. Grigoryan, I. N. Margaryan, and V. M. Tsakanov, “Coupler Kick and Cavity Tilt Effects on Emittance Preservation in Linear Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4013-4015.
- U. Beck et al., “SPEAR 3 - A Low Emittance Source for SSRL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUCL6, pp. 206-208.
- A. Gottstein, E. Kasanda, I. Mateu, L. Eggimann, and S. Braccini, “Upgraded beam profile monitoring using Chromox and fiber optic imaging for high-radiation environments”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 499-502.
- N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
- E. M. Laziev and G. G. Oxuzian, “Radio-Frequency Radiation of High Energy Electrons”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0027, pp. 400-402.
- B. Deriy, M. S. Jaski, and J. Wang, “A New Power Supply System for the IEX Project at the APS”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP188, pp. 1178-1180.
- H. Braun, A. V. Kulikov, R. Pitthan, and M. Woodley, “Nonlinear Effects in the SLC e Transport Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1845-1848.
- V. V. Kolotiy et al., “The Kiev 240 cm Isochronous Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 87-95.
- K. C. Liao, O. Brunner, E. Ciapala, T. Junginger, and W. Weingarten, “Second Sound Measurement Using SMD Resistors to Simulate Quench Locations on the 704 MHz Single-cell Cavity at CERN”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC030, pp. 2269-2271.
- A. S. Chepurnov et al., “CANopen Connected Power Supply Control Systems for the Electron Linacs”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB041, pp. 266-268.
- P. Leban, C. Pradervand, and D. T. Tinta, “Photon Beam Position Measurements using CVD Diamond based Beam Position Sensor and Libera Photon at Swiss Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE047, pp. 1077-1079.
- W.L Zhan, “PROGRESS OF THE HEAVY ION RESEARCH FACILITY IN LANZHOU”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18A2, pp. XX-XX.
- O. Karamyshev et al., “Beam Tracking Simulation for SC200 Superconducting Cyclotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1268-1270.
- Y. Yano, “RI BEAM FACTORY PROJECT AT RIKEN”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18A1, pp. XX-XX.
Back to search