JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	K. Chow et al., “Fabrication and Test Results of a Nb3Sn Superconducting Racetrack Dipole Magnet”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUBR2, pp. 171-173. 
[n]	G. Stern, H. Mainaud Durand, D. Piedigrossi, M. Sosin, A. Geiger, and S. Guillaume, “A Micrometric Positioning Sensor for Laser-Based Alignment”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2700-2703. doi:10.18429/JACoW-IPAC2016-WEPOR017
[n]	C. Quigg, “Particle Physics - Future Directions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOPL001, pp. 754-758. 
[n]	L. C. Richtmann, L. Bortot, E. Ravaioli, C. Wiesner, and D. Wollmann, “Beam-Based Reconstruction of the Shielded Quench-Heater Fields for the LHC Main Dipoles”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1874-1877. doi:10.18429/JACoW-IPAC2022-WEPOPT016
[n]	K. Crook, T. V. Huang, G. Nelson, and V. Price, “Operational Aspects of the SLAC Main Control Center”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 510-514. 
[n]	K. Blasche and B. Franzke, “Status Report on SIS-ESR”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 133-138. 
[n]	F. Senee, B. Pottin, G. Adroit, R. Gobin, O. Tuske, and A. Olivier, “Beam Species Fraction Measurement using Doppler Shift Method with FUJIKURA Fiberscope for IFMIF-EVEDA Injector”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD46, pp. 407-409. 
[n]	T. G. Banks et al., “Design development and R&D for CERN’s HL-LHC external beam dump”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2510-2513. doi:10.18429/JACoW-IPAC2023-TUPM122
[n]	H. Padamsee et al., “Development and Tests of a Superconducting Cavity for High Current Electron Storage Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2048-2051. 
[n]	M. Liepe, S. Belomestnykh, J. Dobbins, R. Kaplan, C. Strohman, and B. Stuhl, “Experience with the New Digital RF Control System at the CESR Storage Ring”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP67, pp. 625-625. 
[n]	B. W. Adams, “Femtosecond Synchronism of X-Rays to Visible Light in an XFEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOA004, pp. XX-XX. 
[n]	Y.-C. Chao et al., “Achieving Beam Quality Requirements for Parity Experiments at Jefferson Lab”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT163, pp. 1509-1511. 
[n]	R. K. Wang et al., “A Digital Power Supply Control Model in Heavy-ion Accelerator based on Dual Nios Cores”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO006, pp. 3346-3348. 
[n]	G. Parzen, “Tune Modulation Due to Gradient Ripple and the Dynamic Aperture”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 959-962. 
[n]	R. Sundelin et al., “CESR RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2844-2847. 
[n]	J. L. Augueres, F. Kircher, J. Lebars, Y. Pabot, and J. C. Sellier, “Room Temperature Magnetic Measurements of Superconducting Magnets”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1166-1169. 
[n]	S. T. Heikkinen, S. Calatroni, H. Neupert, and W. Wuensch, “Status of the Fatigue Studies of the CLIC Accelerating Structures”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS128, pp. 858-860. 
[n]	R. Chasman and G. A. Voss, “Isabelle e-p Option”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 777-782. 
[n]	J. Howell, H. Jostlein, and B. Wehrle, “Calculation of Pressure Distribution in Vacuum Systems Using a Commercial Finite Element Program”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2295-2298. 
[n]	V. Vogel et al., “Connection Module for the European X-ray FEL 10MW Horizontal Multibeam Klystron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB043, pp. 3978-3980. 
[n]	A. Mosnier, S. Chel, X. Hanus, A. Novokhatski, and G. Flynn, “Design of a Heavily Damped Superconducting Cavity for SOLEIL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V029, pp. 1709-1711. 
[n]	A. J. Gonsalves et al., “Multi-GeV Plasma Acceleration Results at BELLA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1319-1324. doi:10.18429/JACoW-IPAC2015-TUYC2
[n]	J. Jones, S. Sharma, D. Bromberek, and J. Howell, “APS SR Flexible Bellows Shield Performance”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP62, pp. 3095-3097. 
[n]	M. R. Clausen and K. Rehlich, “X-Window for Process Control in a Mixed Hardware Environment”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 471-474. doi:10.18429/JACoW-ICALEPCS1991-S13MMI07
[n]	A. Ratkus et al., “Evaluation of green laser source additive manufacturing technology for accelerator applications with ultra-high vacuum requirements”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4960-4963. doi:10.18429/JACoW-IPAC2023-THPM031
[n]	C. M. Pierce et al., “Understanding and Compensating Emittance Diluting Effects in Highly Optimized Ultrafast Electron Diffraction Beamlines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3004-3006. doi:10.18429/JACoW-IPAC2018-THPAF024
[n]	A. M. Sessler, “High-Intensity Effects in the Longitudinal Motion of Stored Particle Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 854-858. 
[n]	M. Babzien, I. Ben-Zvi, R. Malone, X. J. Wang, and V. Yakimenko, “FEL Technologies R&D and SASE Gain Enhancement Observation at the BNL ATF”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1B18, pp. 779-784. 
[n]	S. V. Kutsaev et al., “Design, Simulations and Experimental Demonstration of an Intra-Pulse Ramped-Energy Travelling Wave Linac for Cargo Inspection”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 421-424. doi:10.18429/JACoW-NAPAC2016-TUPOA68
[n]	J. Wei, “Comparison Between Coasting and Bunched Beams on Optimum Stochastic Cooling and Signal Suppression”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1866-1869. 
[n]	R. M. Klopenkov et al., “The CC-18/9M Cyclotron System for Production of Isotopes for PET”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 117-119. doi:10.18429/JACoW-RUPAC2016-THCAMH05

For LaTeX

Use Complete Form

For BibTeX

References

Back to search