Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Krasnykh, V. Ivanov, L. Ives, G. Miram, G. Scheitrum, and D. Sprehn, “3D Modeling Activity for Novel High Power Electron Guns at SLAC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB011, pp. 3312-3314.
[n] J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446.
[n] J. Cereijo Garc?â, T. Korhonen, and J. H. Lee, “Timing System at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 618-621. doi:10.18429/JACoW-ICALEPCS2017-TUPHA088
[n] B. Arfin and F. Friedlander, “Study and Design of the NAL Main Ring Accelerator Cavity”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 237-241.
[n] S. Hahn, “Recent progress in high temperature superconductor magnet technology”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEZD1, unpublished.
[n] S. Lenci, E. Eisen, and B. Stockwell, “Development of An 805-MHz, 550 kW Pulsed Klystron for The Spallation Neutron Source”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU484, pp. 512-514.
[n] O. Karamyshev et al., “Beam Tracking Simulation for SC200 Superconducting Cyclotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1268-1270. doi:10.18429/JACoW-IPAC2016-TUPMR018
[n] D. E. Lobb, “Low Momentum Kaon Beam Lines”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2827-2830.
[n] K. R. Crandall, “Transverse Beam Matching Using Wire Scanners”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper C01, pp. 51-53.
[n] J. M. Fisher, M. Arrowsmith, and E. A. Stout, “Monitoring of the National Ignition Facility Integrated Computer Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC082, pp. 1266-1269.
[n] Y. Bao and G. G. Hanson, “INTENSE MUON BEAMS FROM THE CSNS SPALLATION TARGET”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2708-2710. doi:10.18429/JACoW-IPAC2015-WEPJE016
[n] C. Pearson, A. Vlieks, G. Caryotakis, E. Jongewaard, R. M. Phillips, and D. Sprehn, “The Next Linear Collider Klystron Development Program”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA03, pp. 739-741.
[n] J. Seeman et al., “Results and Plans of the PEP-II B-Factory”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT143, pp. 875-877.
[n] C. Ryu et al., “PLS Linac Instrument an Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1368-1371.
[n] B. Dehning, G. Mugnai, and F. Roncarolo, “High Accuracy Field Mappings with a Laser Monitored Travelling Mole”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B09, pp. 409-411.
[n] N. Bongers et al., “The COSY Control System: A Computer Distributed Multiprocessor System for Accelerator Control”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1149-1152.
[n] T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 302-307.
[n] J. L. Turner et al., “Trickle-charge: a New Operational Mode for PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT146, pp. 881-883.
[n] T. W. Habermann et al., “High-Power Test Results of a 10 MW, High Efficiency, L-Band Multiple Beam Klystron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3RAC03, pp. 1876-1878.
[n] L. Wang, G. J. Caporaso, and S. Sullivan, “Electromagnetic and Thermal Simulations for the Switch Region of a Compact Proton Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS061, pp. 1793-1795.
[n] B. K. Scheidt, “Dipole Light Monitor System for the ESRF Injector”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM002, pp. XX-XX.
[n] W. B. Herrmannsfeldt, R. R. Cochran, and R. H. Helm, “Electromagnetic and Mechanical Properties of Niobium Cavities for a Superconducting Electron Linear Accelerator”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper D-4, pp. 265-277.
[n] A. Sharma, A. D. Ghodke, A. Rahim, and G. Singh, “Design of the Transfer Line-2 for the CTF-3 at CERN”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUC2MA02, pp. 71-73.
[n] S. M. Reisdorf and D. A. Potter, “NIF Electronic Operations: Improving Productivity with iPad Application Development”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB07, pp. 1066-1069.
[n] S. Humphries, J. Petillo, and N. Dionne, “Modeling Secondary Emission in a Finite-Element Multipactor Code”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP008, pp. 390-396.
[n] E. Pozdeyev et al., “Beam Commissioning and Integrated Test of the PIP-II Injector Test Facility”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 13-17. doi:10.18429/JACoW-LINAC2022-MO1PA01
[n] M. Wenskat et al., “A Cross-Lab Qualification of Modified 120??C Baked Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 90-94. doi:10.18429/JACoW-SRF2019-MOP026
[n] A. M. Sessler, “Collective Phenomena in Accelerators”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper K02, pp. 291-299.
[n] G. Eremeev, H. Padamsee, M. Liepe, and R. Roy, “Effect of Mild Baking on High Field Q-Drop of BCP Cavity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP18, pp. 70-73.
[n] M. J. Yang, “Lattice Function Measurement with TBT BPM Data”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ20, pp. 2500-2502.
[n] D. Tronc and A. Setty, “Electrons RF Auto-Focusing and Capture in Bunchers”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-19, pp. 353-355.
[n] O. Berrig, M. Jonker, D. Lohmann, and G. Morpurgo, “The Q-loop: A Function Driven Feedback System for the Betatron Tunes during the LEP Energy Ramp”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP12H, pp. 1717-1719.
[n] R. L. Warnock, J. C. Bergstrom, and M. Klein, “Inter-bunch Communication through CSR in Whispering Gallery Modes”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA19, pp. 219-221.
[n] S. Rauch and M. Zweig, “Improved Function Generator for Device Control for the GSI Control System”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP006, pp. 91-92.
[n] S. Gourlay and G. L. Sabbi, “Future Expectations, Limits and Operational Issues for High Field Superconducting Accelerator Dipole Magnets”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE001, pp. 2397-2399.
[n] W. B. Herrmannsfeldt, “The Magnetic Shielding System for the Stanford Two-Mile Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 929-931.
[n] D. B. Dobson, A. J. Churby, and E. K. Krieger, “Managing a Product Called NIF - PLM Current State and Processes”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC090, pp. 310-313.
[n] Y. Li, H. P. Bohlen, R. N. Tornoe, and E. L. Wright, “IOTs: The Next Generation RF Power Sources for Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH168, pp. 0-3645.
[n] J. C. Sheppard et al., “Diagnoses and Controls of Single e-Pulse Extraction at LCLS-I for the ESTB Program”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 445-448. doi:10.18429/JACoW-IBIC2016-TUPG44
[n] R. Nagaoka et al., “Beam Instability Observations and Analysis at SOLEIL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOBC01, pp. 2019-2021.
[n] S. Lenci, H. Bohlen, B. Stockwell, and E. Wright, “Recent Progress in CW Klystrons at CPI”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU485, pp. 515-517.
[n] Y. Bao, G. G. Hanson, R. B. Palmer, and D. Stratakis, “End-to-End Simulation of Bunch Merging for a Muon Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2336-2338. doi:10.18429/JACoW-IPAC2015-TUPWI040
[n] E. H. M. Wildner et al., “The Accumulator of the ESSnuSB for Neutrino Production”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2245-2247. doi:10.18429/JACoW-IPAC2014-WEPRO117
[n] G. Guethlein, S. Sampayan, T. Houck, and J. McCarrick, “Faraday Cup Measurements of Ions Backstreaming into an Electron Beam Impinging on a Plasma Plume”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB14, pp. 467-469.
[n] E. L. Wright et al., “Modeling and Design of High-Power Inductive Output Tubes”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4RAC03, pp. 767-769.
[n] V. Nassisi et al., “Temporal Quantum Efficiency of a Micro-structured Cathode”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH152, pp. 3149-3151.
[n] J. H. Hetzel, U. Bechstedt, J. B?Âker, A. Lehrach, B. Lorentz, and R. T?Âlle, “Towards Beam-Dynamics Simulations Including More Realistic Field Descriptions for the HESR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 847-849. doi:10.18429/JACoW-IPAC2016-MOPOY002
[n] V. V. Peplov, D. E. Anderson, R. I. Cutler, M. Wezensky, J. D. Hicks, and R. B. Saethre, “SNS Linac Modulator Operational History and Performance”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP275, pp. 1340-1342.
[n] B. F. Viaud, W. Kozanecki, C. O, J. M. Thompson, and M. Weaver, “Monitoring of Interaction-point Parameters using the 3-dimensional Luminosity Distribution Measured at PEP-II”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS026, pp. 598-600.
[n] J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740.
[n] R. H. Liu, L. Kang, H. Qu, G. Y. Wang, H. J. Wang, and J. S. Zhang, “Study of the Vibration of the AC Dipole and Magnetic Measurement Girder for CSNS/RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME023, pp. 2980-2982.
[n] P. Mandrillon et al., “Feasibility Studies of the EULIMA Light Ion Medical Accelerator”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 179-182.
[n] G. K. Brunton et al., “Shot Rate Improvement Strive for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 56-59. doi:10.18429/JACoW-ICALEPCS2015-MOD3O03
[n] M. V. Fisher, A. A. Khan, and J. J. Knopp, “Beamline Alignment and Characterization with an Autocollimator”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 62. doi:10.18429/JACoW-MEDSI2020-MOPC05
[n] N. K. Bultman et al., “Mechanical Engineering of a Linac for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA86, pp. 3594-3596.
[n] J. M. White, T. J. Fessenden, R. A. Fontaine, A. R. Harvey, and A. C. Paul, “Beam Dump/Diagnostics Assembly for a 10-kA, 50 MeV, 50-ns Electron Beam”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2207-2210.
[n] J. C. Sheppard, C. A. Blocker, J. E. Clendenin, R. H. Helm, M. J. Lee, and R. H. Miller, “Emittance Calculations for the Stanford Linear Collider Injector”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2161-2164.
[n] E. J. S. Franklin and J. G. de Villiers, “Ion Spectra Identification Software for the ECR Ion Source at NAC”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-07, pp. 660-663.
[n] D. J. Crawford et al., “Assembly and Installation of Beam Instrumentation for the ASTA Front-end Diagnostic Table”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3732-3734. doi:10.18429/JACoW-IPAC2014-THPME192
[n] M. Antonelli et al., “Very Low Emittance Muon Beam using Positron Beam on Target”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1536-1538. doi:10.18429/JACoW-IPAC2016-TUPMY001
[n] R. Abbott and P. King, “Control System Design for the LIGO Pre-Stabilized Laser”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP038, pp. XX-XX.
[n] L. Reginato, “The Advanced Test Accelerator (ATA), a 50-MeV, 10-kA Induction Linac”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2970-2975.
[n] H. Gaus and W. Roybal, “Los Alamos National Laboratory Fast Kicker Upgrade 2022”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA106, unpublished.
[n] S. Berry et al., “Clean Room Integration of the European XFEL Cavity Strings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2474-2476. doi:10.18429/JACoW-IPAC2014-WEPRI001
[n] M. S. de Jong, “Producing Medical Isotopes using X-rays”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THXA01, pp. 3177-3179.
[n] G. Arnolds-Mayer et al., “A Superconducting 352 MHz Prototype Cavity for LEP”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3587-3590.
[n] R. Bahl, S. K. Kumar, M. Mittal, B. Sarkar, and A. Shyam, “Development of a Neutronics Facility using Radio Frequency Quadrupole for Characterization of Fusion Grade Materials”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 981-984. doi:10.18429/JACoW-IPAC2016-MOPOY056
[n] T. Plettner, R. L. Byer, and P. P. Lu, “Proposed Few-cycle Laser-particle Accelerator Structure”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS081, pp. 3175-3177.
[n] A. J. May et al., “Commissioning of the UKRI STFC Daresbury Vertical Test Facility for Jacketed SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 308. doi:10.18429/JACoW-SRF2021-MOPFAV002
[n] J. R. Noonan, J. Gagliano, G. A. Groeppner, R. A. Rosenberg, and D. R. Walters, “APS Storage Ring Vacuum System Performance”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8C003, pp. 3552-3555.
[n] R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1666-1669.
[n] J. Sage, M. H. Bickley, and K. S. White, “Using a Nameserver to Enhance Control System Efficiency”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP074, pp. XX-XX.
[n] P. Marchand, M. D. Diop, M. Luong, O. Piquet, F. Ribeiro, and R. S. Sreedharan, “Low Level RF System Development for SOLEIL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH186, pp. 1447-1449.
[n] Y. Fuwa, N. Amemiya, Y. Ishi, Y. Kuriyama, and T. Uesugi, “Design of Multi-MW Rapid Cycling Synchrotron for Accelerator Driven Transmutation System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1057-1059. doi:10.18429/JACoW-IPAC2018-TUPAL027
[n] D. L. Borovina et al., “Accelerated Neutron-Induced Failure Tests of 3300-V IGBTs for the Spallation Neutron Source Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE039, pp. 1168-1170.
[n] R. C. Niemann et al., “Experimental Evaluation of Design Features of a Cryostat for an Iron-less Costheta SSC Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3710-3714.
[n] S. Bousson et al., “700 MHz Superconducting Proton Cavities Development and First Tests in the Horizontal Cryostat CRYHOLAB""”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO036, pp. 2211-2213.
[n] L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
[n] T. Sieber et al., “Next Generation Cryogenic Current Comparator (CCC) for nA Intensity Measurement”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2510-2513. doi:10.18429/JACoW-IPAC2019-WEPGW020
[n] F. Kurian et al., “Measurements with the Upgraded Cryogenic Current Comparator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF30, pp. 583-586.
[n] W. B. Herrmannsfeldt and R. O. Bangerter, “Induction Linac Systems Experiments for Heavy Ion Fusion”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2669-2672.
[n] B. A. Aminov et al., “Beam Phase Detection for Proton Therapy Accelerators”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper RPAT045, unpublished.
[n] T. Straumann et al., “New Controls Platform for SLAC High-Performance Systems”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 72-74. doi:10.18429/JACoW-PCAPAC2016-THHWPLCO02
[n] T. S. Mohite, U. Ratzinger, R. Balß, and P. Hülsmann, “Development of a Broad-band Magnetic Alloy Cavity at GSI”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC003, pp. 3275-3277.
[n] E. Mahner, P. Kneisel, N. Pupeter, and G. M??ller, “Effect of Chemical Polishing on the Electron Field Emission of Niobium Samples and Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I51, pp. XX-XX.
[n] K. Halbach, E. Hoyer, S. Marks, D. Plate, and D. Shuman, “CSEM-Steel Hybrid Wiggler/Undulator Magnetic Field Studies”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3640-3643.
[n] N. A. Huque, M. E. Abdelwhab, E. Daly, and Y. M. Pischalnikov, “Accelerated Life Testing of LCLS-II Cavity Tuner Motor”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB062, pp. 1257-1261.
[n] A. Friedman et al., “Progress Toward a Prototype Recirculating Induction Accelerator for Heavy-Ion Fusion”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR14, pp. 828-830.
[n] M. A. Fedorov, G. K. Brunton, C. M. Estes, J. M. Fisher, C. D. Marshall, and E. A. Stout, “Analyzing Off-normals in Large Distributed Control Systems using Deep Packet Inspection and Data Mining Techniques”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC086, pp. 1278-1280.
[n] P. J. S. Barratt, A. P. Letchford, M. Perkins, C. W. Planner, and R. Sidlow, “Operational Experience of Penning H- Ion Sources at ISIS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP084L, pp. 1525-1527.
[n] R. J. England et al., “Manufacture and Testing of Optical-scale Accelerator Structures from Silicon and Silica”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUYB02, pp. 1050-1053.
[n] O. H. Altenmueller et al., “Beam Break-Up Experiments at SLAC”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VI-02, pp. 267-280.
[n] C. Li, Y.-C. Du, W.-H. Huang, C.-X. Tang, and L. X. Yan, “Electron Bunch Slice Emittance Measurement with the Space Charge Effects”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC109, pp. 1272-1274.
[n] W. K. Lau et al., “A New Kicker for the TLS Longitudinal Feedback System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP005, pp. 949-951.
[n] X. Chen et al., “Considerations for a Cavity-Based Position-Sensitive Heavy Ion Detector for the CR at FAIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3477-3479. doi:10.18429/JACoW-IPAC2014-THPME101
[n] N. A. Huque et al., “BNL 56 MHz HOM Damper Prototype Fabrication at JLab”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3521-3524. doi:10.18429/JACoW-IPAC2015-WEPWI015
[n] C. Vaccarezza, “Status of the SPARX FEL Project”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG322, pp. XX-XX.
[n] Y. Iwata et al., “Design of Superconducting Rotating-gantry for Heavy-ion Therapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS074, pp. 3601-3603.
[n] Yu. A. Satov et al., “Development of Injector for ITEP Heavy Ion Synchrotron Based on Laser Plasma Generator”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA020, pp. 86-88.
[n] T. Plettner and R. L. Byer, “Proposed Tabletop Laser-driven Coherent X-Ray Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS069, pp. 1332-1334.
[n] S. Mitsunobu et al., “High Power Input Coupler for KEKB SC Cavity and New 1 MW Test Bench”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP33, pp. 703-705.
[n] D. Sprehn, G. Caryotakis, E. Jongewaard, and R. M. Phillips, “Periodic Permanent Magnet Development for Linear Collider X-Band Klystrons”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper WE1005, pp. 689-696.
[n] A. Homs, “Fast Scalar Data Buffering Interface in Linux 2.6 Kernel”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN027, pp. 943-946.
[n] M. Frey et al., “Status of the Ring RF Systems for FAIR”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2789-2791. doi:10.18429/JACoW-IPAC2015-WEPMA018
[n] D. T. Tran, A. Cailleaux, and G. Berthevas, “Computer-Aided Design of RF Structures”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0032, pp. 414-416.
[n] H. J. Wang, L. Kang, H. Qu, L. Wu, and D. H. Zhu, “Material Test of Proton Beam Window for CSNS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2927-2930. doi:10.18429/JACoW-IPAC2015-WEPMN008
[n] T. H. Luo, D. Li, W. Gai, and J. H. Shao, “Field Emission Study of RF cavity in Static Magnetic Field”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3905-3907. doi:10.18429/JACoW-IPAC2014-THPRI059
[n] J. Grillenberger, M. Humbel, J. Y. Raguin And P, and A. Schmelzbach, “Commissioning And Tuning Of The New Buncher System In The 870 Kev Injection Beamline”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 464-466.
[n] P. Snopok and G. G. Hanson, “6D Cooling Simulations for the Muon Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP035, pp. 4381-4383.
[n] G. Lawler, J. Parsons, and J. Rosenzweig, “Cryogenic Testing Infrastucture at UCLA”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM098, unpublished.
[n] C. H. Kuo, K.-T. Hsu, and M.-H. Wang, “The IEEE-1394 Digital Camera Application in the Taiwan Light Source”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper RPAT058, unpublished.
[n] L. Kang et al., “Key Technologies for Remote Detection of CSNS Radiation Environment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2584-2586. doi:10.18429/JACoW-IPAC2019-WEPGW046
[n] V. A. Lebedev and A. V. Burov, “Transverse Instabilities of Coasting Beams With Space Charge”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA05, pp. 58-62.
[n] C. H. Huang et al., “Online RadFET Reader for Beam Loss Monitoring System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1097-1099. doi:10.18429/JACoW-IPAC2015-MOPTY070
[n] G. Geloni, V. Kocharyan, and E. Saldin, “Ultrafast X-Ray Pulse Measurement Method”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPA14, pp. 386-389.
[n] M. Lonza et al., “Beam-based Feedbacks for the FERMI@Elettra Free Electron Laser”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB033, pp. 2758-2760.
[n] O. A. Anderson and L. L. LoDestro, “Analytic Solution of the Envelope Equations for an Undepressed Matched Beam in a Quadrupole Doublet Channel”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP007, pp. 4320-4322.
[n] C.-J. Jing et al., “The Two Beam Acceleration Staging Experiment at Argonne Wakefield Accelerator Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2714-2716. doi:10.18429/JACoW-IPAC2015-WEPJE020
[n] C. A. Kitegi et al., “Progress of the Coherent Soft X Ray Straight Section at NSLS-II”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC184, pp. 3329-3331.
[n] S. M. Reisdorf, B. A. Conrad, D. A. Potter, and P. D. Reisdorf, “Rapid Application Development Using Web 2.0 Technologies”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB05, pp. 1058-1061.
[n] E. Bouquerel, “Design Status of the ESSvSB Switchyard”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 125-127. doi:10.18429/JACoW-IPAC2015-MOPWA017
[n] T. Plettner et al., “Inverse-Transition Radiation Laser Acceleration Experiments at SLAC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS080, pp. 3172-3174.
[n] G. Berger, T. Daras, M. Loiselet, N. Postiau, and G. Ryckewaert, “Acceleration and Mass-Separation of Radioactive Ion Beams in an Isochronous Cyclotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2610-2613.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Krasnykh, V. Ivanov, L. Ives, G. Miram, G. Scheitrum, and D. Sprehn, “3D Modeling Activity for Novel High Power Electron Guns at SLAC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB011, pp. 3312-3314.
- J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446.
- J. Cereijo Garc?â, T. Korhonen, and J. H. Lee, “Timing System at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 618-621.
- B. Arfin and F. Friedlander, “Study and Design of the NAL Main Ring Accelerator Cavity”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 237-241.
- S. Hahn, “Recent progress in high temperature superconductor magnet technology”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEZD1, unpublished.
- S. Lenci, E. Eisen, and B. Stockwell, “Development of An 805-MHz, 550 kW Pulsed Klystron for The Spallation Neutron Source”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU484, pp. 512-514.
- O. Karamyshev et al., “Beam Tracking Simulation for SC200 Superconducting Cyclotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1268-1270.
- D. E. Lobb, “Low Momentum Kaon Beam Lines”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2827-2830.
- K. R. Crandall, “Transverse Beam Matching Using Wire Scanners”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper C01, pp. 51-53.
- J. M. Fisher, M. Arrowsmith, and E. A. Stout, “Monitoring of the National Ignition Facility Integrated Computer Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC082, pp. 1266-1269.
- Y. Bao and G. G. Hanson, “INTENSE MUON BEAMS FROM THE CSNS SPALLATION TARGET”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2708-2710.
- C. Pearson, A. Vlieks, G. Caryotakis, E. Jongewaard, R. M. Phillips, and D. Sprehn, “The Next Linear Collider Klystron Development Program”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA03, pp. 739-741.
- J. Seeman et al., “Results and Plans of the PEP-II B-Factory”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT143, pp. 875-877.
- C. Ryu et al., “PLS Linac Instrument an Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1368-1371.
- B. Dehning, G. Mugnai, and F. Roncarolo, “High Accuracy Field Mappings with a Laser Monitored Travelling Mole”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B09, pp. 409-411.
- N. Bongers et al., “The COSY Control System: A Computer Distributed Multiprocessor System for Accelerator Control”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1149-1152.
- T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 302-307.
- J. L. Turner et al., “Trickle-charge: a New Operational Mode for PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT146, pp. 881-883.
- T. W. Habermann et al., “High-Power Test Results of a 10 MW, High Efficiency, L-Band Multiple Beam Klystron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3RAC03, pp. 1876-1878.
- L. Wang, G. J. Caporaso, and S. Sullivan, “Electromagnetic and Thermal Simulations for the Switch Region of a Compact Proton Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS061, pp. 1793-1795.
- B. K. Scheidt, “Dipole Light Monitor System for the ESRF Injector”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM002, pp. XX-XX.
- W. B. Herrmannsfeldt, R. R. Cochran, and R. H. Helm, “Electromagnetic and Mechanical Properties of Niobium Cavities for a Superconducting Electron Linear Accelerator”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper D-4, pp. 265-277.
- A. Sharma, A. D. Ghodke, A. Rahim, and G. Singh, “Design of the Transfer Line-2 for the CTF-3 at CERN”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUC2MA02, pp. 71-73.
- S. M. Reisdorf and D. A. Potter, “NIF Electronic Operations: Improving Productivity with iPad Application Development”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB07, pp. 1066-1069.
- S. Humphries, J. Petillo, and N. Dionne, “Modeling Secondary Emission in a Finite-Element Multipactor Code”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP008, pp. 390-396.
- E. Pozdeyev et al., “Beam Commissioning and Integrated Test of the PIP-II Injector Test Facility”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 13-17.
- M. Wenskat et al., “A Cross-Lab Qualification of Modified 120??C Baked Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 90-94.
- A. M. Sessler, “Collective Phenomena in Accelerators”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper K02, pp. 291-299.
- G. Eremeev, H. Padamsee, M. Liepe, and R. Roy, “Effect of Mild Baking on High Field Q-Drop of BCP Cavity”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP18, pp. 70-73.
- M. J. Yang, “Lattice Function Measurement with TBT BPM Data”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ20, pp. 2500-2502.
- D. Tronc and A. Setty, “Electrons RF Auto-Focusing and Capture in Bunchers”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-19, pp. 353-355.
- O. Berrig, M. Jonker, D. Lohmann, and G. Morpurgo, “The Q-loop: A Function Driven Feedback System for the Betatron Tunes during the LEP Energy Ramp”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP12H, pp. 1717-1719.
- R. L. Warnock, J. C. Bergstrom, and M. Klein, “Inter-bunch Communication through CSR in Whispering Gallery Modes”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA19, pp. 219-221.
- S. Rauch and M. Zweig, “Improved Function Generator for Device Control for the GSI Control System”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP006, pp. 91-92.
- S. Gourlay and G. L. Sabbi, “Future Expectations, Limits and Operational Issues for High Field Superconducting Accelerator Dipole Magnets”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE001, pp. 2397-2399.
- W. B. Herrmannsfeldt, “The Magnetic Shielding System for the Stanford Two-Mile Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 929-931.
- D. B. Dobson, A. J. Churby, and E. K. Krieger, “Managing a Product Called NIF - PLM Current State and Processes”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC090, pp. 310-313.
- Y. Li, H. P. Bohlen, R. N. Tornoe, and E. L. Wright, “IOTs: The Next Generation RF Power Sources for Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH168, pp. 0-3645.
- J. C. Sheppard et al., “Diagnoses and Controls of Single e-Pulse Extraction at LCLS-I for the ESTB Program”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 445-448.
- R. Nagaoka et al., “Beam Instability Observations and Analysis at SOLEIL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEOBC01, pp. 2019-2021.
- S. Lenci, H. Bohlen, B. Stockwell, and E. Wright, “Recent Progress in CW Klystrons at CPI”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU485, pp. 515-517.
- Y. Bao, G. G. Hanson, R. B. Palmer, and D. Stratakis, “End-to-End Simulation of Bunch Merging for a Muon Collider”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2336-2338.
- E. H. M. Wildner et al., “The Accumulator of the ESSnuSB for Neutrino Production”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2245-2247.
- G. Guethlein, S. Sampayan, T. Houck, and J. McCarrick, “Faraday Cup Measurements of Ions Backstreaming into an Electron Beam Impinging on a Plasma Plume”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB14, pp. 467-469.
- E. L. Wright et al., “Modeling and Design of High-Power Inductive Output Tubes”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU4RAC03, pp. 767-769.
- V. Nassisi et al., “Temporal Quantum Efficiency of a Micro-structured Cathode”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH152, pp. 3149-3151.
- J. H. Hetzel, U. Bechstedt, J. B?Âker, A. Lehrach, B. Lorentz, and R. T?Âlle, “Towards Beam-Dynamics Simulations Including More Realistic Field Descriptions for the HESR”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 847-849.
- V. V. Peplov, D. E. Anderson, R. I. Cutler, M. Wezensky, J. D. Hicks, and R. B. Saethre, “SNS Linac Modulator Operational History and Performance”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP275, pp. 1340-1342.
- B. F. Viaud, W. Kozanecki, C. O, J. M. Thompson, and M. Weaver, “Monitoring of Interaction-point Parameters using the 3-dimensional Luminosity Distribution Measured at PEP-II”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS026, pp. 598-600.
- J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740.
- R. H. Liu, L. Kang, H. Qu, G. Y. Wang, H. J. Wang, and J. S. Zhang, “Study of the Vibration of the AC Dipole and Magnetic Measurement Girder for CSNS/RCS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME023, pp. 2980-2982.
- P. Mandrillon et al., “Feasibility Studies of the EULIMA Light Ion Medical Accelerator”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 179-182.
- G. K. Brunton et al., “Shot Rate Improvement Strive for the National Ignition Facility (NIF)”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 56-59.
- M. V. Fisher, A. A. Khan, and J. J. Knopp, “Beamline Alignment and Characterization with an Autocollimator”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 62.
- N. K. Bultman et al., “Mechanical Engineering of a Linac for the Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA86, pp. 3594-3596.
- J. M. White, T. J. Fessenden, R. A. Fontaine, A. R. Harvey, and A. C. Paul, “Beam Dump/Diagnostics Assembly for a 10-kA, 50 MeV, 50-ns Electron Beam”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2207-2210.
- J. C. Sheppard, C. A. Blocker, J. E. Clendenin, R. H. Helm, M. J. Lee, and R. H. Miller, “Emittance Calculations for the Stanford Linear Collider Injector”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2161-2164.
- E. J. S. Franklin and J. G. de Villiers, “Ion Spectra Identification Software for the ECR Ion Source at NAC”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XI-07, pp. 660-663.
- D. J. Crawford et al., “Assembly and Installation of Beam Instrumentation for the ASTA Front-end Diagnostic Table”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3732-3734.
- M. Antonelli et al., “Very Low Emittance Muon Beam using Positron Beam on Target”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1536-1538.
- R. Abbott and P. King, “Control System Design for the LIGO Pre-Stabilized Laser”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP038, pp. XX-XX.
- L. Reginato, “The Advanced Test Accelerator (ATA), a 50-MeV, 10-kA Induction Linac”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2970-2975.
- H. Gaus and W. Roybal, “Los Alamos National Laboratory Fast Kicker Upgrade 2022”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA106, unpublished.
- S. Berry et al., “Clean Room Integration of the European XFEL Cavity Strings”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2474-2476.
- M. S. de Jong, “Producing Medical Isotopes using X-rays”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THXA01, pp. 3177-3179.
- G. Arnolds-Mayer et al., “A Superconducting 352 MHz Prototype Cavity for LEP”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3587-3590.
- R. Bahl, S. K. Kumar, M. Mittal, B. Sarkar, and A. Shyam, “Development of a Neutronics Facility using Radio Frequency Quadrupole for Characterization of Fusion Grade Materials”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 981-984.
- T. Plettner, R. L. Byer, and P. P. Lu, “Proposed Few-cycle Laser-particle Accelerator Structure”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS081, pp. 3175-3177.
- A. J. May et al., “Commissioning of the UKRI STFC Daresbury Vertical Test Facility for Jacketed SRF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 308.
- J. R. Noonan, J. Gagliano, G. A. Groeppner, R. A. Rosenberg, and D. R. Walters, “APS Storage Ring Vacuum System Performance”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8C003, pp. 3552-3555.
- R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1666-1669.
- J. Sage, M. H. Bickley, and K. S. White, “Using a Nameserver to Enhance Control System Efficiency”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP074, pp. XX-XX.
- P. Marchand, M. D. Diop, M. Luong, O. Piquet, F. Ribeiro, and R. S. Sreedharan, “Low Level RF System Development for SOLEIL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH186, pp. 1447-1449.
- Y. Fuwa, N. Amemiya, Y. Ishi, Y. Kuriyama, and T. Uesugi, “Design of Multi-MW Rapid Cycling Synchrotron for Accelerator Driven Transmutation System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1057-1059.
- D. L. Borovina et al., “Accelerated Neutron-Induced Failure Tests of 3300-V IGBTs for the Spallation Neutron Source Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE039, pp. 1168-1170.
- R. C. Niemann et al., “Experimental Evaluation of Design Features of a Cryostat for an Iron-less Costheta SSC Magnet”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3710-3714.
- S. Bousson et al., “700 MHz Superconducting Proton Cavities Development and First Tests in the Horizontal Cryostat CRYHOLAB""”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO036, pp. 2211-2213.
- L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
- T. Sieber et al., “Next Generation Cryogenic Current Comparator (CCC) for nA Intensity Measurement”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2510-2513.
- F. Kurian et al., “Measurements with the Upgraded Cryogenic Current Comparator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF30, pp. 583-586.
- W. B. Herrmannsfeldt and R. O. Bangerter, “Induction Linac Systems Experiments for Heavy Ion Fusion”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2669-2672.
- B. A. Aminov et al., “Beam Phase Detection for Proton Therapy Accelerators”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT045, unpublished.
- T. Straumann et al., “New Controls Platform for SLAC High-Performance Systems”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 72-74.
- T. S. Mohite, U. Ratzinger, R. Balß, and P. Hülsmann, “Development of a Broad-band Magnetic Alloy Cavity at GSI”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC003, pp. 3275-3277.
- E. Mahner, P. Kneisel, N. Pupeter, and G. M??ller, “Effect of Chemical Polishing on the Electron Field Emission of Niobium Samples and Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I51, pp. XX-XX.
- K. Halbach, E. Hoyer, S. Marks, D. Plate, and D. Shuman, “CSEM-Steel Hybrid Wiggler/Undulator Magnetic Field Studies”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3640-3643.
- N. A. Huque, M. E. Abdelwhab, E. Daly, and Y. M. Pischalnikov, “Accelerated Life Testing of LCLS-II Cavity Tuner Motor”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB062, pp. 1257-1261.
- A. Friedman et al., “Progress Toward a Prototype Recirculating Induction Accelerator for Heavy-Ion Fusion”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR14, pp. 828-830.
- M. A. Fedorov, G. K. Brunton, C. M. Estes, J. M. Fisher, C. D. Marshall, and E. A. Stout, “Analyzing Off-normals in Large Distributed Control Systems using Deep Packet Inspection and Data Mining Techniques”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC086, pp. 1278-1280.
- P. J. S. Barratt, A. P. Letchford, M. Perkins, C. W. Planner, and R. Sidlow, “Operational Experience of Penning H- Ion Sources at ISIS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP084L, pp. 1525-1527.
- R. J. England et al., “Manufacture and Testing of Optical-scale Accelerator Structures from Silicon and Silica”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUYB02, pp. 1050-1053.
- O. H. Altenmueller et al., “Beam Break-Up Experiments at SLAC”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VI-02, pp. 267-280.
- C. Li, Y.-C. Du, W.-H. Huang, C.-X. Tang, and L. X. Yan, “Electron Bunch Slice Emittance Measurement with the Space Charge Effects”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC109, pp. 1272-1274.
- W. K. Lau et al., “A New Kicker for the TLS Longitudinal Feedback System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP005, pp. 949-951.
- X. Chen et al., “Considerations for a Cavity-Based Position-Sensitive Heavy Ion Detector for the CR at FAIR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3477-3479.
- N. A. Huque et al., “BNL 56 MHz HOM Damper Prototype Fabrication at JLab”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3521-3524.
- C. Vaccarezza, “Status of the SPARX FEL Project”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper WG322, pp. XX-XX.
- Y. Iwata et al., “Design of Superconducting Rotating-gantry for Heavy-ion Therapy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS074, pp. 3601-3603.
- Yu. A. Satov et al., “Development of Injector for ITEP Heavy Ion Synchrotron Based on Laser Plasma Generator”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA020, pp. 86-88.
- T. Plettner and R. L. Byer, “Proposed Tabletop Laser-driven Coherent X-Ray Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS069, pp. 1332-1334.
- S. Mitsunobu et al., “High Power Input Coupler for KEKB SC Cavity and New 1 MW Test Bench”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP33, pp. 703-705.
- D. Sprehn, G. Caryotakis, E. Jongewaard, and R. M. Phillips, “Periodic Permanent Magnet Development for Linear Collider X-Band Klystrons”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper WE1005, pp. 689-696.
- A. Homs, “Fast Scalar Data Buffering Interface in Linux 2.6 Kernel”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN027, pp. 943-946.
- M. Frey et al., “Status of the Ring RF Systems for FAIR”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2789-2791.
- D. T. Tran, A. Cailleaux, and G. Berthevas, “Computer-Aided Design of RF Structures”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0032, pp. 414-416.
- H. J. Wang, L. Kang, H. Qu, L. Wu, and D. H. Zhu, “Material Test of Proton Beam Window for CSNS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2927-2930.
- T. H. Luo, D. Li, W. Gai, and J. H. Shao, “Field Emission Study of RF cavity in Static Magnetic Field”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3905-3907.
- J. Grillenberger, M. Humbel, J. Y. Raguin And P, and A. Schmelzbach, “Commissioning And Tuning Of The New Buncher System In The 870 Kev Injection Beamline”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 464-466.
- P. Snopok and G. G. Hanson, “6D Cooling Simulations for the Muon Collider”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP035, pp. 4381-4383.
- G. Lawler, J. Parsons, and J. Rosenzweig, “Cryogenic Testing Infrastucture at UCLA”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM098, unpublished.
- C. H. Kuo, K.-T. Hsu, and M.-H. Wang, “The IEEE-1394 Digital Camera Application in the Taiwan Light Source”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT058, unpublished.
- L. Kang et al., “Key Technologies for Remote Detection of CSNS Radiation Environment”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2584-2586.
- V. A. Lebedev and A. V. Burov, “Transverse Instabilities of Coasting Beams With Space Charge”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA05, pp. 58-62.
- C. H. Huang et al., “Online RadFET Reader for Beam Loss Monitoring System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1097-1099.
- G. Geloni, V. Kocharyan, and E. Saldin, “Ultrafast X-Ray Pulse Measurement Method”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPA14, pp. 386-389.
- M. Lonza et al., “Beam-based Feedbacks for the FERMI@Elettra Free Electron Laser”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB033, pp. 2758-2760.
- O. A. Anderson and L. L. LoDestro, “Analytic Solution of the Envelope Equations for an Undepressed Matched Beam in a Quadrupole Doublet Channel”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP007, pp. 4320-4322.
- C.-J. Jing et al., “The Two Beam Acceleration Staging Experiment at Argonne Wakefield Accelerator Facility”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2714-2716.
- C. A. Kitegi et al., “Progress of the Coherent Soft X Ray Straight Section at NSLS-II”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC184, pp. 3329-3331.
- S. M. Reisdorf, B. A. Conrad, D. A. Potter, and P. D. Reisdorf, “Rapid Application Development Using Web 2.0 Technologies”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB05, pp. 1058-1061.
- E. Bouquerel, “Design Status of the ESSvSB Switchyard”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 125-127.
- T. Plettner et al., “Inverse-Transition Radiation Laser Acceleration Experiments at SLAC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS080, pp. 3172-3174.
- G. Berger, T. Daras, M. Loiselet, N. Postiau, and G. Ryckewaert, “Acceleration and Mass-Separation of Radioactive Ion Beams in an Isochronous Cyclotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2610-2613.
Back to search