Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. V. Zlobin et al., “Quench Performance and Field Quality of the 15 T Nb?Sn Dipole Demonstrator MDPCT1 in the First Test Run”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 282-285. doi:10.18429/JACoW-NAPAC2019-MOPLO20
[n] C. Hovater, H. Dong, J. Musson, G. Lahti, T. Plawski, and A. Hofler, “A New RF System for the CEBAF Normal Conducting Cavities”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP79, pp. 456-458.
[n] D. Mitrovich, R. Cooper, F. Felber, and P. Wilson, “High Power Integral RF Linac Cavities”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3518-3521.
[n] C. M. Celata et al., “A New Intense Neutron Tool for Radiography and Detection of Water and Ground Contaminants”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9B010, pp. 3807-3809.
[n] A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
[n] G. M. Gammel, A. W. Maschke, and R. M. Mobley, “Bunched Beam Neutralization”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3029-3031.
[n] G. Suberlucq, “Technological Challenges for High Brightness Photo-injectors”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUYBCH02, pp. 64-68.
[n] D. Oumbarek Espinos, M. Masuzawa, M. Tawada, and A. Zhidkov, “Plasma based optics for electron beam fast micro-bunching”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 118-121. doi:10.18429/JACoW-IPAC2025-MOPB025
[n] P. Joshi, T. Matsumoto, S. Michizono, and M. Omet, “Developments for the RF transmission system of the ITN cryomodule”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP59, unpublished.
[n] M. Kuntzsch, S. J. Burger, R. Schurig, and T. Weber, “Long Term Investigation of the Degradation of Coaxial Cables”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 552-555. doi:10.18429/JACoW-IBIC2018-THOB03
[n] Z. Liang et al., “Development of the superconducting HWR cavities for NICA project”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 431-433. doi:10.18429/JACoW-LINAC2024-TUPB050
[n] I. N. Birukov et al., “Recent Studies of Linac for Production of Radioactive Beams in the INR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR01, pp. 1119-1121.
[n] R. Bossart et al., “Tune Measurement and Control at the CERN-SPS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1902-1905.
[n] S. Redaelli, O. Aberle, R. W. Assmann, A. M. Masi, and G. Spiezia, “Detecting Impacts of Proton Beams on the LHC Collimators with Vibration and Sound Measurements”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP006, pp. 1018-1020.
[n] C. Paul, J. Caporaso, M. Fawley, and P. Lee, “The Beamline for the Second Axis of the Dual Axis Radiographic Hydrodynamic Test Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP126, pp. 3254-3256.
[n] I. Wilson, “Alignment Studies for the CERN Linear Collider”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper WE2-01, pp. 557-561.
[n] Y. Bylinsky, V. Kukhtiev, P. Ostroumov, V. Paramonov, and R. E. Laxdal, “A Triple Gap Resonator Design for the Separated Function DTL at TRIUMF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W010, pp. 1135-1137.
[n] J. H. Kamperschroer, J. R. Nelson, D. W. O, and R. T. Shelton, “Target Diagnostic Instrument-Based Controls Framework for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB10, pp. 184-186.
[n] S. Meyer and A. Chan, “A Components Database Design and Implementation for Accelerators and Detectors”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P031, pp. 2517-2519.
[n] B. Jiang, G. Kirkman, and N. Reinhardt, “A High Brightness Electron Beam Produced by a Ferroelectric Cathode”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3078-3081.
[n] S. Shen et al., “Testing of Vacuum System for APT/LEDA RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA112, pp. 1333-1335.
[n] A. Brachmann et al., “The ILC Polarized Electron Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP058, pp. 3420-3422.
[n] D. C. Nguyen et al., “Operation of the High Brightness LINAC for the Advanced Free-Electron Laser Initiative at Los Alamos”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2970-2973.
[n] R. E. Hester et al., “The Experimental Test Accelerator (ETA)”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4180-4183.
[n] A. McElderry, B. Billett, J. A. Carter, and K. J. Wakefield, “Final Design of NEG-Coated Aluminum Vacuum Chambers & Stainless Steel Keyhole Vacuum Chambers for the APS-U Storage Ring”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 480-482. doi:10.18429/JACoW-NAPAC2019-TUPLS12
[n] B. A. Ojur, D. Devereux, S. N. Twum, A. J. Venter, and S. Vrcic, “Asynchronous Execution of Tango Commands in the SKA Telescope Control System: An Alternative to the Tango Async Device”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1108-1114. doi:10.18429/JACoW-ICALEPCS2023-TH1BCO04
[n] R. E. Laxdal, P. G. Bricault, T. Ries, and D. V. Gorelov, “A Separated Function Drift-Tube Linac for the ISAC Project at TRIUMF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W036, pp. 1194-1196.
[n] R. Connolly et al., “Laser Beam-Profile Monitor Development at BNL for SNS”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO204, pp. 21-25.
[n] R. C. Gentzlinger et al., “Design and Fabrication of SCRF Cavities for the APT Continuous-Wave Proton Linac”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT025, pp. XX-XX.
[n] M. C. Lampel, J. M. J. Madey, and R. J. Burke, “First Order Design Study of an Accelerator Beamline for the PEARL FEL”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4015, pp. 797-799.
[n] P. Krejcik, R. Assmann, F.-J. Decker, S. Hartman, R. Miller, and T. Raubenheimer, “Direct Measurement of Transverse Wakefields in the SLC Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPB02, pp. 659-661.
[n] M. Kuntzsch et al., “MicroTCA.4-Based LLRF for CW Operation at ELBE - Status and Outlook”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 101-103. doi:10.18429/JACoW-IBIC2017-MOPWC02
[n] M. D. Pendleton et al., “Commissioning of UKRI-STFC SRF Vertical Test and HPR Reprocessing Facility”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 380-383. doi:10.18429/JACoW-LINAC2022-TUPOJO15
[n] A. Gabriel et al., “Evaluation of ultrafast THz near-fields for electron streaking”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 675-677. doi:10.18429/JACoW-IPAC2024-MOPR92
[n] T. Whitlatch et al., “Shipping and Alignment for the SNS Cryomodule”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH119, pp. 1488-1490.
[n] J. S. Jo et al., “High-Power Ultrashort Terahertz Pulses generated by a Multi-foil Radiator with Laser-Accelerated Electron Pulses”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 739-740. doi:10.18429/JACoW-FEL2015-WEP082
[n] J. L. Conradie et al., “Development of the NAC Accelerator Facilities”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-19, pp. 95-98.
[n] L. Strobino, N. Magnin, and N. Voumard, “Consolidation of the Power Trigger Controllers of the LHC Beam Dumping System”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1439-1443. doi:10.18429/JACoW-ICALEPCS2023-THPDP056
[n] Y. Shoji, Y. Hisaoka, T. Matsubara, and T. Mitsui, “Longitudinal Coherent Oscillation Induced in Quasi-isochronous Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH023, pp. 1972-1974.
[n] G. Bellomo, C. De Martinis, and L. Serafini, “Design of the Magnetic Field for the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-07, pp. 395-397.
[n] J. M. Jowett, K. L. F. Bane, A. Hofmann, P. L. Morton, W. Spence, and R. Stege, “Beam Response Measurements at SPEAR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 726-729.
[n] J. B. Yu et al., “Alignment and Calibration for Collimation System in CSNS/RCS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3432-3435. doi:10.18429/JACoW-IPAC2017-WEPVA070
[n] G. H. Mackenzie, R. Lee, and W. R. Rawnsley, “A Demonstration of Beam Intensity Modulation Without Loss of Charge”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-08, pp. 466-469.
[n] D. Fiander, “Hardware for a Full Aperture Kicker System for the CPS”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1022-1024.
[n] Y. Jongen et al., “First Beam Test Results of the 10 MeV, 100 KW RHODOTRON”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 527-530.
[n] T. Schenkel et al., “MEMS Based Multibeam Ion Linacs”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 249-251. doi:10.18429/JACoW-NAPAC2019-MOPLO07
[n] F. P. Adams, E. R. Gaudette, and J. Ungrin, “Phase-Dependent Quadrupole Effects in On-Axis Coupled Linacs”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-34, pp. 392-394.
[n] J. J. Bisognano, S. A. Heifets, and B. C. Yunn, “Loss Parameters for Very Short Bunches”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 708-711.
[n] S. O. Brauer et al., “Design and Testing of a High Power, Ultra-High Vacuum, Dual-Directional Coupler for the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPE09, pp. 2020-2022.
[n] E.-G. Schweppe, E. Demmel, S. Isagawa, and M. Yoshida, “Stability Improvement of High Power Klystron YK 1303”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1215-1218.
[n] S. Liu et al., “First Beam Halo Measurements Using Wire Scanners at the European XFEL”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 255-258. doi:10.18429/JACoW-FEL2017-TUP003
[n] L. Geoffroy, R. Sabjan, and R. Stefanic, “EPICS to TANGO Translator”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper FOPA05, pp. 739-741.
[n] A. Olmos et al., “Commissioning of the ALBA Fast Orbit Feedback System”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD23, pp. 691-695.
[n] K. I. Tiedtke et al., “Online Photon Beam Position and Intensity Monitoring at FLASH”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH065, pp. XX-XX.
[n] P. Tenenbaum et al., “Beam-Based Optical Tuning of the Final Focus Test Beam”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC20, pp. 749-751.
[n] U. Becker, M. Dohlus, K. Ko, B. Krietenstein, and T. Weiland, “Simulation of Oscillations in High Power Kystrons”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP066G, pp. 1274-1276.
[n] K. Bertsche, “Optimal Placement of Profile Monitors in a Mismatched FODO Lattice”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ21, pp. 2503-2505.
[n] D. Filippetto et al., “Diagnostic for a High Repetition Rate Electron Photo-Gun and First Measurements”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOAL3, pp. 4-7.
[n] Z. Korm?íny, T. Lakatos, and A. Valek, “A Microcomputer-Based Versatile Profile Monitoring System”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-10, pp. 309-312.
[n] D. Rifuggiato, L. Calabretta, P. Gmaj, and G. Bellomo, “Analysis of the Final Magnetic Measurements of the L.N.S. Superconducting Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-19, pp. 241-244.
[n] Y. Qin, Y. Wang, Y. Du, and Z. Dong, “Electron beam dynamics simulations in electron gun and fabrication of cold field emitters by electrochemical etching”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 660-663. doi:10.18429/JACoW-IPAC2024-MOPR87
[n] R. Zou, Z. Dong, Z. Wang, Y. Qin, and Y. Du, “Investigation of beam generation in laser back-illumination mode using metal cathodes of varying thickness in a photocathode DC electron gun”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR88, unpublished.
[n] J. A. Carter et al., “Final Design of the APS-Upgrade Storage Ring Vacuum System”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 315-317. doi:10.18429/JACoW-NAPAC2019-TUYBB3
[n] M. Killenberg, M. Hierholzer, Ch. Schmidt, S. Marsching, and J. Wychowaniak, “Integrating Control Applications into Different Control Systems”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 581-584. doi:10.18429/JACoW-ICALEPCS2015-TUD3O05
[n] Y. Sakagawa et al., “Single Event Simulation for Memories Using Accelerated Ions”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-15, pp. 650-653.
[n] P. R. Tunnicliffe, B. G. Chidley, and J. S. Fraser, “High Current Proton Linear Accelerators and Nuclear Power”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper A05, pp. 36-44.
[n] W. Venturini Delsolaro and A. Miyazaki, “Seamless Quarter Wave Resonators for HIE ISOLDE”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 292-296. doi:10.18429/JACoW-LINAC2018-TU1A05
[n] G. Hochschild and E. Demmel, “RF Power Source Development for the High Current Linear Accelerator of the Spallation Neutron Source (SNQ)”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2836-2839.
[n] J. Haimson and B. Mecklenburg, “A CW Non-Synchronous Traveling Wave Structure for a 300 Me V Pulse Stretcher Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1919-1921.
[n] A. J. Kozubal and R. E. Weiss, “Lessons Learned on the Ground Test Accelerator Control System”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-57, pp. 834-836.
[n] J. H. Zheng et al., “Beam-Phase Measurement System for HIRFL”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP106, pp. 263-265.
[n] W. T. Diamond, “High Voltage Vacuum Insulation in Crossed Magnetic and Electric Fields”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1381-1384.
[n] J. H. Wang et al., “A Closed Orbit Measurement with the NSRL BPM System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA69, pp. 2048-2050.
[n] S. Djekic et al., “Preliminary Design of BLISI, an Off Resonance Microwave Proton Source”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT007, pp. 130-132.
[n] A. M. Sessler, “High-Intensity Effects in the Longitudinal Motion of Stored Particle Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 857-858.
[n] Z. B. du Toit, S. J. Burger, P. J. Celliers, G. S. Z. Guasco, L. Roels, and H. A. Smit, “Aspects of the Design of an 8 MeV Cyclotron as Injector for a 200 MeV Separated-Sector Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-09, pp. 129-131.
[n] P. Ausset, T. Aniel, C. Fougeron, and J. M. Lagniel, “Large Frequency Swing RF Cavities for MIMAS”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 944-947.
[n] R. Benaroya and R. J. Dortwegt, “Vacuum Chamber of the Injector Synchrotron for the Advanced Photon Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2275-2278.
[n] A. Seville et al., “Progress on Dual Harmonic Acceleration on the ISIS Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH114, pp. 309-311.
[n] C. Gerth, B. Beutner, O. Hensler, F. Obier, M. Scholz, and M. Yan, “Online Longitudinal Bunch Profile and Slice Emittance Diagnostics at the European XFEL”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 153-156. doi:10.18429/JACoW-IBIC2017-TUPCC03
[n] H. Tanaka, T. Ohshima, K. Soutome, M. Takao, and H. Takebe, “Optimization of Sextupole Strengths in a Storage Ring for Top-up Operation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT076, pp. 1330-1332.
[n] R. Bossart, “High Precision Beam Position Monitor Using a Re-entrant Coaxial Cavity (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-63, pp. 851-853.
[n] J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “VELA (formerly EBTF) Simulations and First Beam Commissioning”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI065, pp. 431-433.
[n] E. Brentegani, U. van Rienen, W. Hillert, D. Sauerland, and A. Meseck, “Simulation of the Distribution of Parasitic Ions in the Potential of an Electron Beam”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 112-114. doi:10.18429/JACoW-ICAP2015-WEP32
[n] L. Gupta, S. Baturin, Y. K. Kim, and S. Nagaitsev, “Design of a One-Dimensional Sextupole Using Semi-Analytic Methods”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3140-3142. doi:10.18429/JACoW-IPAC2018-THPAF070
[n] R. Abbott, B. Bowling, M. Crofford, J. Fugitt, C. Hovater, and G. A. Krafft, “The CEBAF Injector RF Distribution and Bunch-Length Measurement System”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-66, pp. 232-234.
[n] J. C. Cornell, “Proposal for a Beam Swinger”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I7-09, pp. 552-554.
[n] M. Mapes and W. J. Leonhardt, “Design of Large Aperture, Low Mass Vacuum Windows”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3882-3885.
[n] I. N. D. Draganic et al., “Bunch Shape Monitor Measurements at the LANSCE Linac”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 25-27. doi:10.18429/JACoW-NAPAC2016-MOA3CO03
[n] T. Sen et al., “Expected Results From Channeling Radiation Experiments at Fast”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1873-1876. doi:10.18429/JACoW-IPAC2016-TUPOW049
[n] R. Abbott et al., “Design, Commissioning and Operation of the Upgraded CEBAF Injector (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-30, pp. 777-779.
[n] S. Simrock, L. Merminga, J. Perry, E. Woodworth, R. May, and G. Stapleton, “The CEBAF Beam Loss Sensors”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2184-2187.
[n] A. Mosnier and M. H. Moscatello, “Design of the High Intensity Exotic Beams SPIRAL 2 Project”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE028, pp. 2044-2046.
[n] B. G. Chidley, J. C. Brown, and J. Ungrin, “Conditioning Experiments on the 100% Duty Factor 3 MeV Alvarez Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-7, pp. 360-363.
[n] Z. B. du Toit, L. M. Roels, H. N. Jungwirth, and A. H. Botha, “Calculated and Measured Magnetic Fields for the Injector Cyclotron at the NAC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B20, pp. 94-97.
[n] T. L. Grimm, G. Horner, D. A. Johnson, and F. Marti, “Compensation of Magnetic Field Imperfections in the NSCL K500 Superconducting Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-18, pp. 514-517.
[n] J. Fusellier and J. M. Joly, “Beam Intensity Monitoring and Machine Protection by Toroidal Transformers on the TESLA Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP012L, pp. 1591-1593.
[n] M. Venturini, M. Furman, and J. Vay, “E-Cloud Effects on Single-Bunch Dynamics in the Proposed PS2”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST00, pp. 79-82.
[n] J. M. Peterson, K. L. Brown, and J. B. Truher, “Design Features and Operational Characteristics of the PEP Beam-Transport and Injection System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3059-3062.
[n] J. F. Power, S. S. Kurennoy, J. F. O'Hara, M. A. Plum, and M. Stettler, “Beam Position Monitors for the SNS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH070, pp. 1375-1377.
[n] E. Pozdeyev et al., “FRIB Front End Construction and Commissioning”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 58-62. doi:10.18429/JACoW-IPAC2018-MOZGBF1
[n] C. Yao, W. E. Norum, and J. Wang, “An FPGA-based Tune Measurement System for the APS Booster Synchrotron”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF078, pp. 303-306.
[n] S. Reiche and M. Carl?á, “Detailed Modeling of Seeded Free-electron Lasers”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD35, pp. 101-104.
[n] R. Worsham, D. Dohan, G. Dutto, K. Fong, and V. Pacak, “Reduction of the Multipactoring Effects in the TRIUMF Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F2-03, pp. 205-207.
[n] M. Furman, H. Lee, and B. Zotter, “Energy Loss of Bunched Beams in SSC RF Cavities”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1049-1051.
[n] C. A. Frost et al., “Ion Focused Transport Experiments”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-39, pp. 537-539.
[n] S. J. Cooke et al., “An Advanced Electromagnetic Eigenmode Solver for Vacuum Electronics Devices - CTLSS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDL3, pp. 360-362.
[n] G. Bellomo, P. Gmaj, M. Pinardi, and L. Rossi, “Analysis of the Magnetic Field Measurements of the Milan Superconducting Cyclotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1169-1172.
[n] T. Katayama and Y. N. Rao, “Intrabeam Scattering of Heavy Ion in DSR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP019G, pp. 1024-1026.
[n] M. G. Mazarakis et al., “Experimental Investigation of Certain Beam Transport Issues in a Pulsed Transmission Line Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper FRQ0004, pp. 466-468.
[n] A. C. Caruso, F. Caruso, A. Longhitano, A. Spart?â, G. Primadei, and J. Sura, “Hybrid Configuration, Solid State-Tube, Revamps an Obsolete Tube Amplifier for the INFB K-800 Superconducting Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 263-266. doi:10.18429/JACoW-Cyclotrons2016-WEB02
[n] L. Ficcadenti et al., “Longitudinal and Transverse Wakefields Simulations and Studies in Dielectric-Coated Circular Waveguides”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4708-4711. doi:10.18429/JACoW-IPAC2018-THPML027
[n] S. Yakovenko et al., “Status of the High Voltage Electron Cooler Project for NICA Collider”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUACH01, pp. 58-59.
[n] V. Talanov, D. C. Kiselev, and M. Wohlmuther, “Numerical Estimation of the Equivalent Dose Rate after the Irradiation of a Tungsten Collimator by a Low Energy Proton Beam”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 890-892. doi:10.18429/JACoW-IPAC2014-MOPRI114
[n] M. Q. Barton and E. C. Raka, “High Intensity Beam Instabilities in the Brookhaven AGS”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1032-1035.
[n] T. Tanabe et al., “First Operation of the Superconducting Electron Cooler at the Storage Ring TARN II”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3B009, pp. 1557-1559.
[n] M. Mizumoto et al., “A Proton Accelerator for Neutron Science Project at JAERI”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5A001, pp. 309-313.
[n] F. Thesni, N. Kumar, M. Patel, B. Rawat, W. Butcher, and C. Welsch, “Gas-Jet based Ionization Profile Monitor for Proton FLASH Therapy”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 460-463. doi:10.18429/JACoW-IBIC2025-TUPMO05
[n] R. Bossart, “Resonant Beam Position Monitor for Low Intensity Ion Beams”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 979-982.
[n] Z. Korm?íny et al., “Development of Non-destructive Beam Current Measurement for the iThemba LABS Cyclotrons”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC020, pp. 1089-1091.
For LaTeX
Use Complete Form
For BibTeX
References
- A. V. Zlobin et al., “Quench Performance and Field Quality of the 15 T Nb?Sn Dipole Demonstrator MDPCT1 in the First Test Run”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 282-285.
- C. Hovater, H. Dong, J. Musson, G. Lahti, T. Plawski, and A. Hofler, “A New RF System for the CEBAF Normal Conducting Cavities”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP79, pp. 456-458.
- D. Mitrovich, R. Cooper, F. Felber, and P. Wilson, “High Power Integral RF Linac Cavities”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3518-3521.
- C. M. Celata et al., “A New Intense Neutron Tool for Radiography and Detection of Water and Ground Contaminants”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9B010, pp. 3807-3809.
- A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
- G. M. Gammel, A. W. Maschke, and R. M. Mobley, “Bunched Beam Neutralization”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3029-3031.
- G. Suberlucq, “Technological Challenges for High Brightness Photo-injectors”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUYBCH02, pp. 64-68.
- D. Oumbarek Espinos, M. Masuzawa, M. Tawada, and A. Zhidkov, “Plasma based optics for electron beam fast micro-bunching”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB025, pp. 118-121.
- P. Joshi, T. Matsumoto, S. Michizono, and M. Omet, “Developments for the RF transmission system of the ITN cryomodule”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP59, unpublished.
- M. Kuntzsch, S. J. Burger, R. Schurig, and T. Weber, “Long Term Investigation of the Degradation of Coaxial Cables”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 552-555.
- Z. Liang et al., “Development of the superconducting HWR cavities for NICA project”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 431-433.
- I. N. Birukov et al., “Recent Studies of Linac for Production of Radioactive Beams in the INR”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR01, pp. 1119-1121.
- R. Bossart et al., “Tune Measurement and Control at the CERN-SPS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1902-1905.
- S. Redaelli, O. Aberle, R. W. Assmann, A. M. Masi, and G. Spiezia, “Detecting Impacts of Proton Beams on the LHC Collimators with Vibration and Sound Measurements”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP006, pp. 1018-1020.
- C. Paul, J. Caporaso, M. Fawley, and P. Lee, “The Beamline for the Second Axis of the Dual Axis Radiographic Hydrodynamic Test Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP126, pp. 3254-3256.
- I. Wilson, “Alignment Studies for the CERN Linear Collider”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper WE2-01, pp. 557-561.
- Y. Bylinsky, V. Kukhtiev, P. Ostroumov, V. Paramonov, and R. E. Laxdal, “A Triple Gap Resonator Design for the Separated Function DTL at TRIUMF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W010, pp. 1135-1137.
- J. H. Kamperschroer, J. R. Nelson, D. W. O, and R. T. Shelton, “Target Diagnostic Instrument-Based Controls Framework for the National Ignition Facility (NIF)”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB10, pp. 184-186.
- S. Meyer and A. Chan, “A Components Database Design and Implementation for Accelerators and Detectors”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P031, pp. 2517-2519.
- B. Jiang, G. Kirkman, and N. Reinhardt, “A High Brightness Electron Beam Produced by a Ferroelectric Cathode”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3078-3081.
- S. Shen et al., “Testing of Vacuum System for APT/LEDA RFQ”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA112, pp. 1333-1335.
- A. Brachmann et al., “The ILC Polarized Electron Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP058, pp. 3420-3422.
- D. C. Nguyen et al., “Operation of the High Brightness LINAC for the Advanced Free-Electron Laser Initiative at Los Alamos”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2970-2973.
- R. E. Hester et al., “The Experimental Test Accelerator (ETA)”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4180-4183.
- A. McElderry, B. Billett, J. A. Carter, and K. J. Wakefield, “Final Design of NEG-Coated Aluminum Vacuum Chambers & Stainless Steel Keyhole Vacuum Chambers for the APS-U Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 480-482.
- B. A. Ojur, D. Devereux, S. N. Twum, A. J. Venter, and S. Vrcic, “Asynchronous Execution of Tango Commands in the SKA Telescope Control System: An Alternative to the Tango Async Device”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TH1BCO04, pp. 1108-1114.
- R. E. Laxdal, P. G. Bricault, T. Ries, and D. V. Gorelov, “A Separated Function Drift-Tube Linac for the ISAC Project at TRIUMF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W036, pp. 1194-1196.
- R. Connolly et al., “Laser Beam-Profile Monitor Development at BNL for SNS”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO204, pp. 21-25.
- R. C. Gentzlinger et al., “Design and Fabrication of SCRF Cavities for the APT Continuous-Wave Proton Linac”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT025, pp. XX-XX.
- M. C. Lampel, J. M. J. Madey, and R. J. Burke, “First Order Design Study of an Accelerator Beamline for the PEARL FEL”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4015, pp. 797-799.
- P. Krejcik, R. Assmann, F.-J. Decker, S. Hartman, R. Miller, and T. Raubenheimer, “Direct Measurement of Transverse Wakefields in the SLC Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPB02, pp. 659-661.
- M. Kuntzsch et al., “MicroTCA.4-Based LLRF for CW Operation at ELBE - Status and Outlook”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 101-103.
- M. D. Pendleton et al., “Commissioning of UKRI-STFC SRF Vertical Test and HPR Reprocessing Facility”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 380-383.
- A. Gabriel et al., “Evaluation of ultrafast THz near-fields for electron streaking”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR92, pp. 675-677.
- T. Whitlatch et al., “Shipping and Alignment for the SNS Cryomodule”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH119, pp. 1488-1490.
- J. S. Jo et al., “High-Power Ultrashort Terahertz Pulses generated by a Multi-foil Radiator with Laser-Accelerated Electron Pulses”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 739-740.
- J. L. Conradie et al., “Development of the NAC Accelerator Facilities”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-19, pp. 95-98.
- L. Strobino, N. Magnin, and N. Voumard, “Consolidation of the Power Trigger Controllers of the LHC Beam Dumping System”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP056, pp. 1439-1443.
- Y. Shoji, Y. Hisaoka, T. Matsubara, and T. Mitsui, “Longitudinal Coherent Oscillation Induced in Quasi-isochronous Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH023, pp. 1972-1974.
- G. Bellomo, C. De Martinis, and L. Serafini, “Design of the Magnetic Field for the Milan Superconducting Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-07, pp. 395-397.
- J. M. Jowett, K. L. F. Bane, A. Hofmann, P. L. Morton, W. Spence, and R. Stege, “Beam Response Measurements at SPEAR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 726-729.
- J. B. Yu et al., “Alignment and Calibration for Collimation System in CSNS/RCS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3432-3435.
- G. H. Mackenzie, R. Lee, and W. R. Rawnsley, “A Demonstration of Beam Intensity Modulation Without Loss of Charge”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper H-08, pp. 466-469.
- D. Fiander, “Hardware for a Full Aperture Kicker System for the CPS”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1022-1024.
- Y. Jongen et al., “First Beam Test Results of the 10 MeV, 100 KW RHODOTRON”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 527-530.
- T. Schenkel et al., “MEMS Based Multibeam Ion Linacs”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 249-251.
- F. P. Adams, E. R. Gaudette, and J. Ungrin, “Phase-Dependent Quadrupole Effects in On-Axis Coupled Linacs”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-34, pp. 392-394.
- J. J. Bisognano, S. A. Heifets, and B. C. Yunn, “Loss Parameters for Very Short Bunches”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 708-711.
- S. O. Brauer et al., “Design and Testing of a High Power, Ultra-High Vacuum, Dual-Directional Coupler for the Advanced Photon Source (APS) Linear Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPE09, pp. 2020-2022.
- E.-G. Schweppe, E. Demmel, S. Isagawa, and M. Yoshida, “Stability Improvement of High Power Klystron YK 1303”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1215-1218.
- S. Liu et al., “First Beam Halo Measurements Using Wire Scanners at the European XFEL”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 255-258.
- L. Geoffroy, R. Sabjan, and R. Stefanic, “EPICS to TANGO Translator”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper FOPA05, pp. 739-741.
- A. Olmos et al., “Commissioning of the ALBA Fast Orbit Feedback System”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPD23, pp. 691-695.
- K. I. Tiedtke et al., “Online Photon Beam Position and Intensity Monitoring at FLASH”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH065, pp. XX-XX.
- P. Tenenbaum et al., “Beam-Based Optical Tuning of the Final Focus Test Beam”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC20, pp. 749-751.
- U. Becker, M. Dohlus, K. Ko, B. Krietenstein, and T. Weiland, “Simulation of Oscillations in High Power Kystrons”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP066G, pp. 1274-1276.
- K. Bertsche, “Optimal Placement of Profile Monitors in a Mismatched FODO Lattice”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ21, pp. 2503-2505.
- D. Filippetto et al., “Diagnostic for a High Repetition Rate Electron Photo-Gun and First Measurements”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOAL3, pp. 4-7.
- Z. Korm?íny, T. Lakatos, and A. Valek, “A Microcomputer-Based Versatile Profile Monitoring System”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-10, pp. 309-312.
- D. Rifuggiato, L. Calabretta, P. Gmaj, and G. Bellomo, “Analysis of the Final Magnetic Measurements of the L.N.S. Superconducting Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-19, pp. 241-244.
- Y. Qin, Y. Wang, Y. Du, and Z. Dong, “Electron beam dynamics simulations in electron gun and fabrication of cold field emitters by electrochemical etching”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR87, pp. 660-663.
- R. Zou, Z. Dong, Z. Wang, Y. Qin, and Y. Du, “Investigation of beam generation in laser back-illumination mode using metal cathodes of varying thickness in a photocathode DC electron gun”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR88, unpublished.
- J. A. Carter et al., “Final Design of the APS-Upgrade Storage Ring Vacuum System”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 315-317.
- M. Killenberg, M. Hierholzer, Ch. Schmidt, S. Marsching, and J. Wychowaniak, “Integrating Control Applications into Different Control Systems”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 581-584.
- Y. Sakagawa et al., “Single Event Simulation for Memories Using Accelerated Ions”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-15, pp. 650-653.
- P. R. Tunnicliffe, B. G. Chidley, and J. S. Fraser, “High Current Proton Linear Accelerators and Nuclear Power”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper A05, pp. 36-44.
- W. Venturini Delsolaro and A. Miyazaki, “Seamless Quarter Wave Resonators for HIE ISOLDE”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 292-296.
- G. Hochschild and E. Demmel, “RF Power Source Development for the High Current Linear Accelerator of the Spallation Neutron Source (SNQ)”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2836-2839.
- J. Haimson and B. Mecklenburg, “A CW Non-Synchronous Traveling Wave Structure for a 300 Me V Pulse Stretcher Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1919-1921.
- A. J. Kozubal and R. E. Weiss, “Lessons Learned on the Ground Test Accelerator Control System”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-57, pp. 834-836.
- J. H. Zheng et al., “Beam-Phase Measurement System for HIRFL”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP106, pp. 263-265.
- W. T. Diamond, “High Voltage Vacuum Insulation in Crossed Magnetic and Electric Fields”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1381-1384.
- J. H. Wang et al., “A Closed Orbit Measurement with the NSRL BPM System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA69, pp. 2048-2050.
- S. Djekic et al., “Preliminary Design of BLISI, an Off Resonance Microwave Proton Source”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUPOT007, pp. 130-132.
- A. M. Sessler, “High-Intensity Effects in the Longitudinal Motion of Stored Particle Beams”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 857-858.
- Z. B. du Toit, S. J. Burger, P. J. Celliers, G. S. Z. Guasco, L. Roels, and H. A. Smit, “Aspects of the Design of an 8 MeV Cyclotron as Injector for a 200 MeV Separated-Sector Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-09, pp. 129-131.
- P. Ausset, T. Aniel, C. Fougeron, and J. M. Lagniel, “Large Frequency Swing RF Cavities for MIMAS”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 944-947.
- R. Benaroya and R. J. Dortwegt, “Vacuum Chamber of the Injector Synchrotron for the Advanced Photon Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2275-2278.
- A. Seville et al., “Progress on Dual Harmonic Acceleration on the ISIS Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH114, pp. 309-311.
- C. Gerth, B. Beutner, O. Hensler, F. Obier, M. Scholz, and M. Yan, “Online Longitudinal Bunch Profile and Slice Emittance Diagnostics at the European XFEL”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 153-156.
- H. Tanaka, T. Ohshima, K. Soutome, M. Takao, and H. Takebe, “Optimization of Sextupole Strengths in a Storage Ring for Top-up Operation”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT076, pp. 1330-1332.
- R. Bossart, “High Precision Beam Position Monitor Using a Re-entrant Coaxial Cavity (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-63, pp. 851-853.
- J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “VELA (formerly EBTF) Simulations and First Beam Commissioning”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI065, pp. 431-433.
- E. Brentegani, U. van Rienen, W. Hillert, D. Sauerland, and A. Meseck, “Simulation of the Distribution of Parasitic Ions in the Potential of an Electron Beam”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 112-114.
- L. Gupta, S. Baturin, Y. K. Kim, and S. Nagaitsev, “Design of a One-Dimensional Sextupole Using Semi-Analytic Methods”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3140-3142.
- R. Abbott, B. Bowling, M. Crofford, J. Fugitt, C. Hovater, and G. A. Krafft, “The CEBAF Injector RF Distribution and Bunch-Length Measurement System”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-66, pp. 232-234.
- J. C. Cornell, “Proposal for a Beam Swinger”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I7-09, pp. 552-554.
- M. Mapes and W. J. Leonhardt, “Design of Large Aperture, Low Mass Vacuum Windows”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3882-3885.
- I. N. D. Draganic et al., “Bunch Shape Monitor Measurements at the LANSCE Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 25-27.
- T. Sen et al., “Expected Results From Channeling Radiation Experiments at Fast”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1873-1876.
- R. Abbott et al., “Design, Commissioning and Operation of the Upgraded CEBAF Injector (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-30, pp. 777-779.
- S. Simrock, L. Merminga, J. Perry, E. Woodworth, R. May, and G. Stapleton, “The CEBAF Beam Loss Sensors”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2184-2187.
- A. Mosnier and M. H. Moscatello, “Design of the High Intensity Exotic Beams SPIRAL 2 Project”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE028, pp. 2044-2046.
- B. G. Chidley, J. C. Brown, and J. Ungrin, “Conditioning Experiments on the 100% Duty Factor 3 MeV Alvarez Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S6-7, pp. 360-363.
- Z. B. du Toit, L. M. Roels, H. N. Jungwirth, and A. H. Botha, “Calculated and Measured Magnetic Fields for the Injector Cyclotron at the NAC”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B20, pp. 94-97.
- T. L. Grimm, G. Horner, D. A. Johnson, and F. Marti, “Compensation of Magnetic Field Imperfections in the NSCL K500 Superconducting Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-18, pp. 514-517.
- J. Fusellier and J. M. Joly, “Beam Intensity Monitoring and Machine Protection by Toroidal Transformers on the TESLA Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP012L, pp. 1591-1593.
- M. Venturini, M. Furman, and J. Vay, “E-Cloud Effects on Single-Bunch Dynamics in the Proposed PS2”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper PST00, pp. 79-82.
- J. M. Peterson, K. L. Brown, and J. B. Truher, “Design Features and Operational Characteristics of the PEP Beam-Transport and Injection System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3059-3062.
- J. F. Power, S. S. Kurennoy, J. F. O'Hara, M. A. Plum, and M. Stettler, “Beam Position Monitors for the SNS Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH070, pp. 1375-1377.
- E. Pozdeyev et al., “FRIB Front End Construction and Commissioning”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 58-62.
- C. Yao, W. E. Norum, and J. Wang, “An FPGA-based Tune Measurement System for the APS Booster Synchrotron”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF078, pp. 303-306.
- S. Reiche and M. Carl?á, “Detailed Modeling of Seeded Free-electron Lasers”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD35, pp. 101-104.
- R. Worsham, D. Dohan, G. Dutto, K. Fong, and V. Pacak, “Reduction of the Multipactoring Effects in the TRIUMF Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F2-03, pp. 205-207.
- M. Furman, H. Lee, and B. Zotter, “Energy Loss of Bunched Beams in SSC RF Cavities”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1049-1051.
- C. A. Frost et al., “Ion Focused Transport Experiments”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-39, pp. 537-539.
- S. J. Cooke et al., “An Advanced Electromagnetic Eigenmode Solver for Vacuum Electronics Devices - CTLSS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDL3, pp. 360-362.
- G. Bellomo, P. Gmaj, M. Pinardi, and L. Rossi, “Analysis of the Magnetic Field Measurements of the Milan Superconducting Cyclotron”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1169-1172.
- T. Katayama and Y. N. Rao, “Intrabeam Scattering of Heavy Ion in DSR”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP019G, pp. 1024-1026.
- M. G. Mazarakis et al., “Experimental Investigation of Certain Beam Transport Issues in a Pulsed Transmission Line Linear Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper FRQ0004, pp. 466-468.
- A. C. Caruso, F. Caruso, A. Longhitano, A. Spart?â, G. Primadei, and J. Sura, “Hybrid Configuration, Solid State-Tube, Revamps an Obsolete Tube Amplifier for the INFB K-800 Superconducting Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 263-266.
- L. Ficcadenti et al., “Longitudinal and Transverse Wakefields Simulations and Studies in Dielectric-Coated Circular Waveguides”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4708-4711.
- S. Yakovenko et al., “Status of the High Voltage Electron Cooler Project for NICA Collider”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUACH01, pp. 58-59.
- V. Talanov, D. C. Kiselev, and M. Wohlmuther, “Numerical Estimation of the Equivalent Dose Rate after the Irradiation of a Tungsten Collimator by a Low Energy Proton Beam”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 890-892.
- M. Q. Barton and E. C. Raka, “High Intensity Beam Instabilities in the Brookhaven AGS”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1032-1035.
- T. Tanabe et al., “First Operation of the Superconducting Electron Cooler at the Storage Ring TARN II”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3B009, pp. 1557-1559.
- M. Mizumoto et al., “A Proton Accelerator for Neutron Science Project at JAERI”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5A001, pp. 309-313.
- F. Thesni, N. Kumar, M. Patel, B. Rawat, W. Butcher, and C. Welsch, “Gas-Jet based Ionization Profile Monitor for Proton FLASH Therapy”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 460-463.
- R. Bossart, “Resonant Beam Position Monitor for Low Intensity Ion Beams”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 979-982.
- Z. Korm?íny et al., “Development of Non-destructive Beam Current Measurement for the iThemba LABS Cyclotrons”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC020, pp. 1089-1091.
Back to search