[n] K. P. Przygoda et al., “High Voltage RTM Piezo Driver for XFEL Special Diagnostics”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 860-862. doi:10.18429/JACoW-IPAC2015-MOPHA034
[n] M. Schaer et al., “Study of a C-band Standing-wave Gun for the SwissFEL Injector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 698-700. doi:10.18429/JACoW-IPAC2014-MOPRI043
[n] Ch. Schmidt et al., “Performance of the MTCA.4 Based LLRF System at FLASH”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2433-2435. doi:10.18429/JACoW-IPAC2014-WEPME067
[n] K. Zingre, B. Mountford, M. P. Atkinson, R. T. Dowd, G. LeBlanc, and C. G. Hollwich, “Proposed Linac Upgrade with a SLED Cavity at the Australian Synchrotron, SLSA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2738-2740. doi:10.18429/JACoW-IPAC2015-WEPMA001
[n] M. Eshraqi, “Compersation of Effect of Malfunctioning Spoke Resonators on Ess Beam Quality”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS063, pp. 2643-2645.
[n] M. Kuntzsch et al., “Optical Synchronization and Electron Bunch Diagnostic at ELBE”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME006, pp. 2932-2934.
[n] Y. Renier et al., “High Average RF Power Tests With 2 RF Vacuum Windows at PITZ”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1744-1746. doi:10.18429/JACoW-IPAC2016-TUPOW003
[n] H. Witte, J. S. Berg, R. B. Palmer, D. Stratakis, and F. Borgnolutti, “Magnet Design for a Six-dimensional Rectilinear Cooling Channel - Feasibility Study”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2740-2742. doi:10.18429/JACoW-IPAC2014-WEPRI103
[n] E. S. Fischer et al., “From Design Towards Series - The Superconducting Magnets for FAIR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1167-1170. doi:10.18429/JACoW-IPAC2016-TUPMB031
[n] J. J. Back et al., “Particle Production Simulations for the Neutrino Factory Target”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ008, pp. 835-837.
[n] E. Daskalaki, S. Doebert, M. Duquenne, H. Mainaud Durand, A. L. Vamvakas, and V. Rude, “Study of the Dynamic Response of CLIC Accelerating Structures”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2000-2003. doi:10.18429/JACoW-IPAC2015-TUPTY003
[n] M. Espig et al., “Development of Pulsed Laser Systems and Cathode-performance Studies for the S-DALINAC Polarized Injector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD054, pp. 2642-2644.
[n] M. Koratzinos et al., “TLEP: High-performance Circular e+e- Collider to Study the Higgs Boson”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME040, pp. 1658-1660.
[n] H. Witte, J. S. Berg, and M. L. Lopes, “Progress on the Dipole Magnet for a Rapid Cycling Synchrotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1322-1324. doi:10.18429/JACoW-IPAC2014-TUPRO115
[n] D. Gonnella and M. Liepe, “New Insights into Heat Treatment of SRF Cavities in a Low-pressure Nitrogen Atmosphere”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2634-2637. doi:10.18429/JACoW-IPAC2014-WEPRI064
[n] A. Lunin, N. Solyak, A. I. Sukhanov, and V. P. Yakovlev, “Coupler RF Kick in the Input 1.3 GHz Accelerating Cavity of the LCLS-II Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 571-574. doi:10.18429/JACoW-IPAC2015-MOPMA016
[n] A. De Santis et al., “DANE Transfer Line for KLOE-2 Physics Run”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3797-3799. doi:10.18429/JACoW-IPAC2014-THPRI015
[n] H. Danared, “Design of the ESS Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP071, pp. 3904-3906.
[n] S. Verdú-Andrés, U. Amaldi, A. Degiovanni, A. Faus-Golfe, and P. A. Posocco, “Feasibility Study of a High-gradient Linac for Hadrontherapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS045, pp. 2589-2591.
[n] Y. Yuri, I. Ishibori, T. Ishizaka, S. Okumura, K. Yoshida, and T. Yuyama, “Formation of a Uniform Ion Beam Based on Nonlinear Focusing and its Applications at the JAEA TIARA Cyclotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 236-238. doi:10.18429/JACoW-IPAC2015-MOPWA052
[n] H. C. Li et al., “Study on the LN2 Consumption of the Beamline Ln2 Transfer System for TPS Project”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3182-3184. doi:10.18429/JACoW-IPAC2015-WEPHA032
[n] Y. Renier, J. Pfingstner, D. Schulte, and R. Tomas, “Detection of Ground Motion Effects on the Beam Trajectory at ATF2”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR060, pp. 1954-1956.
[n] S.-C. Kim et al., “High Current Unipolar Magnet Power Supply System at the PLS-II Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD055, pp. 3638-3640.
[n] Y. Xu et al., “Preliminary Results of H2+ Beam Generated by a 2.45 GHz Permanent Magnet ECR Ion Source at PKU”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI035, pp. 363-365.
[n] E. Quaranta, R. Bruce, and S. Redaelli, “SixTrack Simulation of Off-momentum Cleaning in LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO037, pp. 972-974.
[n] J. X. Wu et al., “A Novel Type of Forward Coupler Slotted Stripline Pickup Electrode for CSRe Stochastic Cooling”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME044, pp. 571-573.
[n] G. Vandoni, M. Ady, M. A. Hermann, R. Kersevan, and D. T. Ziemianski, “Leak Propagation Dynamics for the HIE-ISOLDE Superconducting Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2351-2353. doi:10.18429/JACoW-IPAC2014-WEPME039
[n] S. Redaelli et al., “Experience with High-intensity Beam Scraping and Tail Populations at the Large Hadon Collider”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO039, pp. 978-980.
[n] B. Masschaele, H. De Gersem, T. Roggen, H. Podlech, and D. Vandeplassche, “Simulation of the Thermal Deformation and the Cooling of a Four-rod Radio Frequency Quadrupole”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 376-378. doi:10.18429/JACoW-IPAC2014-MOPME002
[n] R. Calaga, R. Miyamoto, R. Tomas, and G. Vanbavinckhove, “Beta* Measurement in the LHC Based on K-modulation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ027, pp. 1864-1866.
[n] J.-L. Fernandez-Hernando, D. Angal-Kalinin, and J. Resta-López, “Thermo-mechanical Study of a CLIC Bunch Train hitting a Beryllium Energy Spoiler Model”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS041, pp. 1629-1631.
[n] D. Jeon, “Status of the RAON Accelerator Systems”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO062, pp. 3898-3900.
[n] F. Stulle, J. F. Bergoz, and J. Musson, “Goubau Line Beam Instrumentation Testing, The Benefits”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3462-3464. doi:10.18429/JACoW-IPAC2014-THPME096
[n] A. Saa Hernandez et al., “The New SLS Beam Size Monitor, First Results”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA041, pp. 759-761.
[n] F. J. Cullinan, S. T. Boogert, N. Y. Joshi, and A. Lyapin, “Calibration Errors in the Cavity Beam Position Monitor System at the ATF2”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC025, pp. 1051-1053.
[n] C. S. Søndergaard et al., “Charged Particle Beam Profile Detector based on Yb-doped Optical Fibers”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC066, pp. 1150-1152.
[n] K. Ott and M. Helmecke, “The Shielding Design of BERLinPro”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO031, pp. 1503-1505.
[n] X. Yin et al., “The R&D Status of SSC-LINAC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3277-3279. doi:10.18429/JACoW-IPAC2014-THPME026
[n] M. Juchno, “Magnetic Model of the CERN Proton Synchrotron Main Magnetic Unit”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO019, pp. 2439-2441.
[n] S. Chunjarean and S. Shin, “Insertion Devices and Beam Dynamics in the PLS-II Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC072, pp. 2187-2189.
Use Complete Form