JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Zh. X. Tang, X. M. Yang, W. Q. Zhang, and Y. J. Pei, “Study on Characteristics of Asymmetric Centre Iris of Photocathode Microwave Electron Gun”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3951-3953. doi:10.18429/JACoW-IPAC2016-THPOW010
[n]	G. Andonian et al., “Dielectric Wakefield Acceleration with a Laser Injected Witness Beam”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 481-484. doi:10.18429/JACoW-IPAC2021-MOPAB138
[n]	M. Ludwig, J. A. R. Arroyo Garcia, M. Bengulescu, B. Farnham, P. G. J. Gonzalez Jimenez, and F. Varela, “Developing and Validating OPC-UA Based Industrial Controls for Power Supplies at CERN”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 35-37. doi:10.18429/JACoW-PCaPAC2018-WEP04
[n]	G. Zinkann, E. Clifft, and S. I. Sharamentov, “An Improved Pneumatic Frequency Control for Superconducting Cavities”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT082, pp. 4090-4092. 
[n]	G. Bourianoff, B. Cole, H. Ferede, and F. Pilat, “Closed Orbit Correction in the SSC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 348-351. 
[n]	M. P. Dunning et al., “Status and Upgrades of the NLCTA for Studies of Advanced Beam Acceleration, Dynamics, and Manipulation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP014, pp. 130-132. 
[n]	C. Emma et al., “Study of XFEL Third Harmonic Radiation at LCLS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1875-1877. doi:10.18429/JACoW-IPAC2019-TUPRB091
[n]	Yu. V. Bylinsky et al., “Beam Matching in the Transition Region between DTL and DAWL of the INR Linac”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 566-569. 
[n]	I. M. Kapchinskij, A. M. Kozodaev, N. V. Lazarev, and V. S. Skachkov, “Design and Development of Permanent Magnet Quadrupoles for Ion Linacs”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper F07, pp. 350-351. 
[n]	M. Parise, J. Bernardini, and D. Passarelli, “Niobium to Titanium Electron Beam Welding for SRF Cavities”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 515-518. doi:10.18429/JACoW-LINAC2022-TUPOGE13
[n]	I. Hsu, “A Simulation Program for Low Energy Injection Study”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1711-1714. 
[n]	P. Sievers, R. Bellone, D. Fiander, J. Hangst, and G. Silvestrov, “Performance and Operational Experience with CERN-Lithium Lenses”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1401-1404. 
[n]	C. Couillaud, G. Haouat, and S. Striby, “Soft X-ray Production by Means of an Electron Beam”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP016G, pp. 2693-2695. 
[n]	A. Bungau, R. J. Barlow, J. R. Alonso, J. M. Conrad, J. Spitz, and M. Shaevitz, “Optimisation Studies of a High Intensity Electron Antineutrino Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI073, pp. 449-451. 
[n]	J. Griffin and F. Marti, “Third Harmonic Central Region for the K500-K800 Superconducting Cyclotrons”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B08, pp. 48-51. 
[n]	S. C. Schaub, M. A. Shapiro, and R. J. Temkin, “Vacuum Breakdown at 110 GHz”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 275-277. doi:10.18429/JACoW-NAPAC2016-TUA2CO04
[n]	J. Grimm, T. T. Arkan, M. H. Foley, T. N. Khabiboulline, and D. J. Watkins, “1.3 GHz RF Nb Cavity to Ti Helium Vessel TIG Welding Process at Fermilab”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO041, pp. 669-671. 
[n]	A. Augustinus, L. S. Jirden, P. Rosinsky, and P. Ch. Chochula, “Cybersecurity in ALICE DCS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB32, pp. 460-462. 
[n]	N. Suradet, G. G. Hoyes, P. Klysubun, S. Krainara, P. Sudmuang, and S. Teawphet, “Improvement of the Siam Photon Source Beam Loss Monitor System”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 190-192. doi:10.18429/JACoW-IBIC2015-MOPB058
[n]	S. Haghtalab, F. Ghasemi, M. Lamehi, F. Abbasi Davani, and S. Ahmadian, “Current Status of IPM Linac Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 973-975. doi:10.18429/JACoW-ICALEPCS2017-TUPHA214
[n]	H. R. Kremers, J. P. M. Beijers, S. Brandenburg, V. Mironov, and S. Saminathan, “Detailed Investigation of the 4D Phase-Space of an Ion Beam”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUZO02, pp. 30-33. 
[n]	Y. T. Yan, J. Irwin, Y. Cai, T. Chen, and D. Ritson, “Swamp Plots for Dynamic Aperture studies of PEP-II Lattices”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA26, pp. 588-590. 
[n]	S. Cao et al., “Ultra-high spatial resolution in micron scale achieved by a practical cascade high energy electron radiography in HERPL”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB057, unpublished. 
[n]	Y. Trenikhina, A. Grassellino, and A. Romanenko, “Chemical Structure of Niobium Samples Vacuum Treated in Nitrogen in Parallel With Very High Q0 Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP065, pp. 583-585. 
[n]	J. C. Collins and Wm. Manwaring, “Computer Upgrade in the IUCF Control System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2059-2062. 
[n]	Z. Zhao, H. Ding, and H. Xu, “Status of the Shanghai Synchrotron Radiation Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WOAB002, pp. 214-216. 
[n]	L. J. Rybarcyk, “Method for Obtaining Proper Injection Steering into the LAMPF DTL”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-77, pp. 547-548. 
[n]	W. Schappert et al., “Adaptive Lorentz Force Detuning Compensation in the ILC S1-G Cryomodule at KEK”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO064, pp. 254-257. 
[n]	Ju. V. Bylinsky et al., “Meson Factory Accelerating Structure Tuning”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1202-1205. 
[n]	K. Zhao et al., “Progress of FEL Based on RF Superconducting Accelerator at Peking University”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOM401, pp. XX-XX. 
[n]	M. Brightwell, M. Br?ñger, A. Lang, and A. Suwalska, “A Customizable Platform for High-availability Monitoring, Control and Data Distribution at CERN”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS037, pp. 418-421. 
[n]	Y. Chung, J. Bridges, G. Decker, and L. Emery, “Open Loop Compensation for the Eddy Current Effect in the APS Storage Ring Vacuum Chamber”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1525-1528. 
[n]	S. Efimov, I. Karnaukhov, S. Kononenko, A. Shcherbakov, A. Tarasenko, and A. Zelinsky, “The Dynamical Aperture of ISI - 800”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA08, pp. 542-544. 
[n]	W. Kleeven et al., “The Self-Extracting Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper L-1, pp. XX-XX. 
[n]	A. Mikhailichenko and T. Moore, “Simple Procedure for Superconducting Coil Winding”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH319, pp. 3645-3647. 
[n]	J. Tan, L. Soby, and M. Sordet, “Beam Position Monitor System for the CERN Linac4”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD97, pp. 272-274. 
[n]	S. V. Kutsaev et al., “Ceramics Evaluation for MW-Power Coaxial Windows, Operating in UHF Frequency Range”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2668-2671. doi:10.18429/JACoW-IPAC2022-THPOPT037
[n]	J. Norem, J. Dawson, W. Haberichter, W. Novak, L. Reed, and X-F. Yang, “Construction of a High Resolution Electron Beam Profile Monitor”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2462-2465. 
[n]	K. Moseev, E. V. Kaportsev, Y. V. Krylov, and A. G. Valentinov, “Modernization of the Electron Beam Stabilization System in the KSRS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 656-658. doi:10.18429/JACoW-RUPAC2016-THPSC054
[n]	L. Grech et al., “Renovation of the Beam-Based Feedback Controller in the LHC”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 671-676. doi:10.18429/JACoW-ICALEPCS2021-WEPV019
[n]	J. L. Steinmann et al., “4-Channel Single Shot and Turn-by-Turn Spectral Measurements of Bursting CSR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 231-234. doi:10.18429/JACoW-IPAC2017-MOPAB056
[n]	A. C. Lira, G. Monteiro, L. H. Oliveira, and A. R. Silva, “Power Supplies for the LNLS 500-MeV Booster Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH017, pp. 3702-3704. 
[n]	T. Zhang et al., “Generating Polarization Controllable FELs at Dalian Coherent Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEODB102, pp. 2071-2073. 
[n]	D. McGinnis and J. Marriner, “Design of  4-8 GHz Stochastic Cooling Equalizers for the Fermilab Accumulator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1392-1395. 
[n]	R. H. Miller et al., “Recent Ideas on Upgrading the SLAC Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 604-609. 
[n]	J. Hill, “Spectrum Signal Processing Capabilities for EPICS”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP709, pp. XX-XX. 
[n]	L. Faillace et al., “High-power Tests and Initial Electron Beam Measurements of the New High-gradient Normal Conducting RF Photoinjector System for the Sincrotrone Trieste”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM27, pp. 694-696. 
[n]	H. T. Edwards et al., “Construction of a 3.9 GHz Superconducting RF Cavity Module at Fermilab”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP058, pp. 957-959. 
[n]	J. E. Stovall, L. D. Hansborough, and H. A. O, “Radioisotope-Production Linac”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper J102, pp. 344-348. 
[n]	S. Date et al., “Operation and Performance of the SPring-8 Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP35, pp. 2346-2348. 
[n]	J. M. Jimenez, G. Arduini, and K. Weiss, “The SPS as a Vacuum Test Bench for Electron Cloud Studies with LHC Type Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAB006, pp. 685-687. 
[n]	T. Ladzinski, F. Havart, P. Ninin, E. Sanchez-Corral Mena, F. Valentini, and D. Vaxelaire, “New Concepts for Access Devices in the SPS Personnel Protection System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1608-1612. doi:10.18429/JACoW-ICALEPCS2017-THPHA099
[n]	M. Pusterla, G. Servizi, and G. Turchetti, “Non-Linear Beam-Beam Forces in Storage Rings: Particular Analysis for S.S.C. and L.H.C. Parameters”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2405-2409. 
[n]	J. L. Pons, “TangoGraphQL: A GraphQL Binding for Tango Control System Web-Based Applications”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 181-183. doi:10.18429/JACoW-ICALEPCS2021-MOPV025
[n]	J. M. Nixon and L. M. Bollinger, “The Liqud Helium System of  ATLAS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 571-574. 
[n]	N. Solyak et al., “Development of the Third Harmonic Cavity at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB014, pp. 1213-1215. 
[n]	K. Seiya et al., “Multi-batch Slip Stacking in the Main Injector at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUODKI03, pp. 742-744. 
[n]	R. Chasman, K. Batchelor, and N. Fewell, “Calculations and Measurements on Reduction of the Energy Spread and the Variation in Mean Energy of the 200-MeV Linac Beam at Brookhaven”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper B05, pp. 41-46. 
[n]	Z. H. Zhang, L. F. Zheng, W. H. Jia, and P. Liu, “Motion Control of the Mirror Chamber”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME034, pp. 2998-3000. 
[n]	K. Seiya et al., “Progress in slip stacking and barrier-RF”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAY02, pp. 293-297. 
[n]	P. Thieberger et al., “Recent Triplet Vibration Studies in RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC028, pp. 516-518. 
[n]	M. Siddiqi and R. A. Kishek, “Simulation of Ping-Pong Multipactor with Continuous Electron Seeding”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 181-183. doi:10.18429/JACoW-NAPAC2016-MOPOB53
[n]	S. J. Bean et al., “A Novel Vacuum Chamber Design for the APS Upgrade of the 26-ID Nanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 296. doi:10.18429/JACoW-MEDSI2020-WEPB15
[n]	T. Winkelmann, R. Cee, Th. Haberer, B. Naas, A. Peters, and S. Scheloske, “Experience at the Ion Beam Therapy Center (HIT) with 2 Years of Continuous ECR Ion Source Operation”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-10, pp. 86-88. 
[n]	M. S. Khan, S. M. Belsare, K. D. Galodiya, S. S. Khirwadkar, and T. H. Patel, “Microcontroller Based DAQ System for IR Thermography by Hot and Cold Water Flow”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD18, pp. 37-39. 
[n]	F. Pilat, G. Bourianoff, B. Cole, R. Talman, and R. York, “Dynamic Aperture and Performance of the SSC Low Energy Booster Lattice”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 363-366. 
[n]	P. Van Vaerenbergh et al., “Stainless Steel Vacuum Chambers for the EBS Storage Ring”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 118-120. doi:10.18429/JACoW-MEDSI2018-TUPH35
[n]	W. Treutterer et al., “Software Structure and Real-Time Signal Exchange for the ASDEX Upgrade Tokamak Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH111, pp. XX-XX. 
[n]	K. R. Kim, C.-Y. Lee, J. S. Lee, and B.-S. Park, “Design of the 20 MeV User Facilities of Proton Engineering Frontier Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH189, pp. 2376-2378. 
[n]	B. Aune et al., “New Performances of the Beams of the Saclay's High Duty Cycle Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 561-564. 
[n]	M. Ball, T. J. P. Ellison, and C. M. Fox, “New Nondestructive Beam Diagnostics for the IUCF Cyclotron Cooler”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-02, pp. 278-282. 
[n]	S. Krylov et al., “Results of Start of the 150 kV Magnetic Pulse Compressor”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP4, pp. 1485-1487. 
[n]	R. Stassen, B. Breitkreutz, N. Shurkhno, H. Stockhorst, and L. Thorndahl, “The HESR Stochastic Cooling System, Design, Construction and Test Experiments in COSY”, in Proc. COOL'17, Bonn, Germany, Sep. 2017, pp. 89-93. doi:10.18429/JACoW-COOL2017-THA11
[n]	G. L. Xu, G. Lei, L. Wang, Y. L. Zhang, and P. Zhu, “CSNS Timing System Prototype”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS028, pp. 386-388. 
[n]	Á. Rodríguez Páramo et al., “Design of BPMs for a 750 MHz hadrontherapy Linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 75-77. doi:10.18429/JACoW-LINAC2024-MOPB018
[n]	A. Romanenko, L. D. Cooley, G. Wu, and G. Ciovati, “Post-Baking Losses in Niobium Cavities Studied by Dissection”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO008, pp. 710-713. 
[n]	L. Yang, F. Long, and Z. H. ZhenHua, “Design and Development of Accelerator Magnet Power Supply Based on SiC-MOSFET”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3429-3431. doi:10.18429/JACoW-IPAC2017-WEPVA068
[n]	W. Schnell, “High Frequency Linear Colliders”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 368-373. 
[n]	S. West, J. W. Gray, and A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT144, pp. 1467-1469. 
[n]	Z. Liu, X. Deng, and L. Yan, “Unifying coherent synchrotron radiation wakefield and classical radiation reaction”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 825-827. doi:10.18429/JACoW-IPAC2024-MOPS47
[n]	D. C. Weisser, M. Malev, and J. S. Sokolowski, “The Stub to Plate Weld in Quarter Wave Resonators - An Investigation”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-10, pp. XX-XX. 
[n]	T. Kitayama, N. Kawakami, Y. Sato, A. Shibayama, Y. Uno, and Y. Watanabe, “High-Speed, High-Accuracy Magnet Power Supply Using FET Chopper for Synchrotron Facility”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1145-1148. 
[n]	W. Pellico, K. A. Domann, F. G. Garcia, K. E. Gollwitzer, K. Seiya, and R. M. Zwaska, “FNAL - The Proton Improvement Plan (PIP)”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3409-3411. doi:10.18429/JACoW-IPAC2014-THPME075
[n]	L. C. Teng, “Heavy Ion Accelerators for Inertial Fusion”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3110-3115. 
[n]	W. R. Smythe et al., “RF Cavities with Transversely Biased Ferrite Tuning”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2951-2954. 
[n]	M. Di Giacomo et al., “RF Commissioning of the SPIRAL2 RFQ in CW Mode and Beyond Nominal Field”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2804-2806. doi:10.18429/JACoW-IPAC2019-WEPRB007
[n]	M. Oyamada et al., “CHARACTERIZATION AND CONDITIONING OF RF SYSTEMS OF THE SIAM PHOTON SOURCE”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEAM05, pp. XX-XX. 
[n]	E. Zaplatin, R. Eichhorn, F. M. Esser, B. Laatsch, and R. Stassen, “COSY SC HWR Investigations”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP45, pp. 437-441. 
[n]	J. Reid and H. Miller, “A 200 KW Power Amplifier and Solid State Driver for the Fermilab Main Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ11, pp. 1544-1546. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search