JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	K. C. D. Chan and S. O. Schriber, “Characteristics of Large Beam Hole Biperiodic Accelerator Structures”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2766-2769. 
[n]	A. O. Sezgin et al., “Low Tc Superconducting Thin Film-Based Multilayer (S(I)S) Structures for SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPTEV005, pp.. 
[n]	B. Xaia, T. Gatsi, and O. J. Mokone, “Automated Software Testing for Control and Monitoring a Radio Telescope”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1806-1810. doi:10.18429/JACoW-ICALEPCS2017-THPHA164
[n]	R. Calaga, “Successful Crabbing of Proton Beams”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2510-2515. doi:10.18429/JACoW-IPAC2021-WEXA01
[n]	O. S. Melnychuk, R. V. Pilipenko, Y. M. Pischalnikov, W. Schappert, and D. A. Sergatskov, “Phase Method of Measuring Cavity Quality Factor”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2604-2607. doi:10.18429/JACoW-IPAC2014-WEPRI053
[n]	J. D. Sherman et al., “A DC Proton Injector for Use in High-Current CW Linacs”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP43C, pp. 1424-1426. 
[n]	F. L. Krawczyk et al., “Design of a ?ƒ=0.175, 2-gap Spoke Resonator”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT011, pp. XX-XX. 
[n]	Z. G. Zong et al., “Research and development of 1.3 GHz low loss cavities made of China large grain at IHEP”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP34, pp. XX-XX. 
[n]	M. W. McGee, J. Grimm, D. R. Olis, and W. Schappert, “Transatlantic Transport of Fermilab 3.9 GHz Cryomodule to DESY”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP052, pp. 1665-1667. 
[n]	H. W. Zhao, A. A. Efremov, and V. B. Kutner, “Simulation of Multiply-Charged Ion Production in DECRIS-14-2”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-13, pp. 416-419. 
[n]	D. E. Gough, R. L. Cassel, A. R. Donaldson, D. Hutchinson, and T. S. Mattison, “The Timing and Diagnostic Systems of the Kicker Magnet Pulsers for the Stanford Linear Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3168-3171. 
[n]	Q. Gu, M. Zhang, and M. H. Zhao, “A Passive Linearizer for Bunch Compression”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB022, pp. 525-527. 
[n]	V. P. Struev et al., “External Neutron Source for Research Reactor Based on Linear Accelerator and Beryllium Target”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 754-756. doi:10.18429/JACoW-IPAC2014-MOPRI066
[n]	X. H. Zhang, “Design and Analysis of the 230 MeV Cyclotron Magnet for the Proton Therapy System”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THPO016, pp. 342-343. doi:10.18429/JACoW-CYCLOTRONS2022-THPO016
[n]	S. H. Kim, C. Doose, K. Kim, R. Hogrefe, and R. Merl, “Magnetic Measurements of the Storage Ring Quadrupole Magnets for the 7-GeV Advanced Photon Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2805-2808. 
[n]	U. Becker, M. Zhang, and T. Weiland, “Two and Three Dimensional Simulations of Dark Current on TESLA-Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C07, pp. 397-401. 
[n]	D. A. Kayran et al., “MARS-A Project of the Diffraction Limited Fourth Generation X-Ray Source”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D015, pp. 704-706. 
[n]	R. M. Seraphim et al., “Large Vacuum Intervention to Install New BPMs and Radiation Absorbers in the LNLS Electron Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA004, pp. 2475-2477. 
[n]	Y. Gao et al., “Exploratory Data Analysis on the RHIC Cryogenics System Compressor Dataset”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 907-912. doi:10.18429/JACoW-ICALEPCS2023-TUPDP138
[n]	K. Fujita et al., “Explicit Time Domain Boundary Element Scheme for Dispersion-free Wake Field Calculation of Long Accelerator Structures”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN045, pp. 3330-3332. 
[n]	J. E. Spencer, “ESamp;H Issues for Design and Operation of Linear Colliders”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS144, pp. 0-3645. 
[n]	L. A. C. Piazza et al., “Design Features of a 300 AMeV Superconducting Cyclotron for Hadron Therapy”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP008, pp. 1306-1308. 
[n]	K. Fujita, H. Kawaguchi, T. Weiland, and I. Zagorodnov, “MPI Parallel Computation of Wake Fields by Using Time Domain Boundary Element Method”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT077, pp. 2673-2675. 
[n]	H. Piel, B. Aminov, A. Borisov, M. Getta, S. Kolesov, and N. Pupeter, “Modular High Power Solid State RF Amplifiers for Particle Accelerators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP081, pp. 1017-1019. 
[n]	J. Stowisek, T. R. Riesco, and A. S. Suwalska, “Technical Infrastructure Monitoring at CERN”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS135, pp. 1822-1824. 
[n]	J. Bonofiglio, S. Alfredson, S. Hitchcock, F. Marti, A. Rodriguez, and G. Stork, “Stripper Foil Mechanism for the K1200 Superconducting Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-04, pp. XX-XX. 
[n]	P. G. O, J. E. Dyson, R. G. Maggs, P. Schafstall, and T. J. Zaugg, “Variable Gradient Permanent-Magnet Quadrupole Lenses”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 354-357. 
[n]	F. Pilat, P. Cameron, V. Ptitsyn, and J.-P. Koutchouk, “Linear and Nonlinear Corrections in the RHIC Interaction Regions”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE042, pp. 1281-1283. 
[n]	M. G. Minty, C. Adolphsen, L. J. Hendrickson, R. Sass, T. Slaton, and M. Woodley, “Feedback Performance at the Stanford Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPB03, pp. 662-664. 
[n]	M. J. Barnes et al., “Operational Experience of a Prototype LHC Injection Kicker Magnet with a Low SEY Coating and Redistributed Power Deposition”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3974-3977. doi:10.18429/JACoW-IPAC2019-THPRB072
[n]	F. J. Willeke, “Commissioning of NSLS-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 11-16. doi:10.18429/JACoW-IPAC2015-MOYGB3
[n]	D. Proft, F. Frommberger, and W. Hillert, “Overview of the ELSA Accelerator Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOBB04, pp. 1396-1399. 
[n]	S. Guiducci, “Progress and Plans for RD and the Conceptual Design of the ILC Injector Systems”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WOAA003, pp. 315-319. 
[n]	P. Maccioni and J. L. Boutes, “Superconducting Cavities Manufacturing at CERCA”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D31, pp. 1090-1093. 
[n]	L. Li, W. Chen, G. Ni, and X. J. Sun, “Rotating Coil Magnetic Measurement System and Measurement Results of Quadrupole Prototype for BEPCII Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT024, pp. 1844-1846. 
[n]	B. Han et al., “Tests of Cs-Free Operation of the SNS RF H? Ion Sources”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 184-187. doi:10.18429/JACoW-NAPAC2019-MOPLH08
[n]	N. J. Diserens, “Space and Image Charge Calculations for the Chalk River RFQ1-1250 Accelerator Using the RFQTRAK Beam Simulation Program”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-60, pp. 214-216. 
[n]	S. Zhou, “A 90 MeV Electron Linac of IHEP”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-28, pp. 505-507. 
[n]	L.-H. Yu and F. J. Willeke, “Ultra-Short X-ray Pulse Generation by Electron Beam Slicing in Storage Rings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOAB201, pp. 1134-1136. 
[n]	J. E. Spencer, “Radioactivity and Damage Studies for Next Generation Colliders”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS064, pp. 578-580. 
[n]	D. Tronc, “Electron Linac Optimisation for Short RF and Beam Pulse Lengths”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3243-3246. 
[n]	Y. Hong, J. Wu, B. Yang, and G. Zhou, “Analytical Thermal Analysis of Thin Diamond in High-Intensity High-Repetition-Rate Application”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 587-590. doi:10.18429/JACoW-NAPAC2019-TUPLE13
[n]	T. Gromme et al., “Slow Feedback Systems for PEP-II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A15, pp. 1897-1899. 
[n]	S. A. Pande, C. Christou, P. Gu, and G. Burt, “Multipactor Study in the Coupler Region of the Diamond SCRF Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 405-408. doi:10.18429/JACoW-SRF2017-TUPB010
[n]	A. Hershcovitch et al., “Effect of oxygen and other impurities on copper coating conductivity at cryogenic temperatures”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4396-4399. doi:10.18429/JACoW-IPAC2023-THPA185
[n]	D. Raparia et al., “Uniform Current Density for BLIP Target at Brookhaven 200 MeV Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP007, pp. 850-852. 
[n]	M. Masaki, H. Dewa, T. Fujita, S. Takano, and H. Maesaka, “Design Optimization of Button-Type BPM Electrode for the SPring-8 Upgrade”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 360-363. doi:10.18429/JACoW-IBIC2016-TUPG18
[n]	A. Castilla et al., “First RF Performance Results for the DQW Crab Cavities to be Tested in the CERN SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1077-1080. doi:10.18429/JACoW-IPAC2017-MOPVA095
[n]	K. Fujita, T. Enoto, and H. Kawaguchi, “Design Study of Dedicated Computer System for Wake Field Analysis with Time Domain Boundary Element Method”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH132, pp. 2233-2235. 
[n]	R. Mercado, I. J. Gillingham, J. Rowland, and K. G. Wilkinson, “Integrating EtherCAT Based IO into EPICS at Diamond”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMAU004, pp. 662-665. 
[n]	L. Groening et al., “Upgrade of the Unilac for Fair”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1281-1285. doi:10.18429/JACoW-IPAC2015-TUXB2
[n]	A. Deshpande et al., “Pressure spike in the LBNF absorber core’s gun drilled cooling channel from an accident beam pulse”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3830-3832. doi:10.18429/JACoW-IPAC2024-THPS42
[n]	S. R. Lawrie et al., “Re-Commissioning the Front End Test Stand Negative Hydrogen Ion Source, Beam Transport and Interlocks”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4769-4772. doi:10.18429/JACoW-IPAC2018-THPML059
[n]	H. Hanaki et al., “Injector System for X-ray FEL at SPring-8”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC010, pp. 85-87. 
[n]	L. G. Shen, X. L. Fu, Y. Sun, F. Zhang, and Y. J. Pei, “High Power Collinear Load Coated with FeSiAl”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD068, pp. 2678-2680. 
[n]	M. Plesko and F. Amand, “Recent Highlights from Cosylab”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO103, pp. 132-134. 
[n]	H. Dollard, D. R. Heywood, D. E. Marquardt, D. P. Gurd, and R. R. Johnson, “CAMAC Controls Applications at TRIUMF”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 485-490. 
[n]	J. V. Cresswell, D. R. Heywood, D. P. Gurd, R. R. Johnson, and W. K. Lacey, “The TRIUMF Control System”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 476-485. 
[n]	F. Ehm, “Running a Reliable Messaging Infrastructure for CERN's Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN006, pp. 724-727. 
[n]	H. X. Deng and M. Zhang, “Review of Electron Beam Manipulation by using Corrugated Device for Light Sources”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEAMH5, pp. 9-11. 
[n]	S. Guiducci, “Damping Rings towards Ultra-low Emittances”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEYPA02, pp. 1857-1861. 
[n]	A. Solodko et al., “Engineering Design and Fabrication of Tapered Damped X-band Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC038, pp. 157-159. 
[n]	V. Maradia, A. L. Lomax, D. Meer, S. Psoroulas, and D. C. Weber, “A Novel Intensity Compensation Method to Achieve Energy Independent Beam Intensity at the Patient Location for Cyclotron Based Proton Therapy Facilities”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3004-3006. doi:10.18429/JACoW-IPAC2022-THPOMS024
[n]	S. G. Arutunian and J. R. Alonso, “Complex Beam Profile Reconstruction, A Novel Rotating Array of Vibrating Wires”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3415-3417. doi:10.18429/JACoW-IPAC2014-THPME077
[n]	A. Calanna, D. Campo, J. M. Conrad, L. Calabretta, M. Haj Tahar, and F. Meot, “The Cyclotron Complex for the DAEALUS Experiment”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT029, pp. 381-383. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search