Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Bloess et al., “Superconducting, Hydroformed, Niobium Sputter Coated Copper Cavities at 1.5 GHz”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2057-2060.
[n] J. Haimson, “Optimization Criteria for Standing Wave Transverse Magnetic Deflection Cavities”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VI-06, pp. 303-331.
[n] J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP020, pp. XX-XX.
[n] J. A. MacLachlan, G. Nicholls, J. Nicholls, G. Silvestrov, and T. Vsevolozhskaya, “Pulsed High Current Optics for pbar Production at 5.4 GeV/c”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2785-2791.
[n] K. Furukawa and R. Rechenmacher, “Network Analyser for the EPICS Channel Access Protocol”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP008, pp. 96-98.
[n] C. J. R. Duncan, P. Cueva, J. M. Maxson, and D. A. Muller, “Improving Energy Resolution and Compensating Chromatic Aberration With a TM010 Microwave Cavity”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 411-413. doi:10.18429/JACoW-NAPAC2019-TUPLM18
[n] G. Ciovati et al., “Design of a 915 MHz conduction-cooled cryomodule”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper MOP58, unpublished.
[n] M. Yakopov, S. Abeghyan, S. Karabekyan, J. Pflueger, and Z. Zhao, “Automation of the Magnetic Field Measurements of the Air Coils by Means of the Moving Wire System”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 114-116. doi:10.18429/JACoW-PCAPAC2016-THPOPRPO14
[n] E. Forest, H. Nishimura, D. S. Robin, Y. Wu, and A. A. Zholents, “Mini-Beta Lattice for the Femto-Second X-Ray Source at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A17, pp. 1098-1100.
[n] J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508.
[n] V. Ptitsyn et al., “eRHIC Design Status”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 628-631. doi:10.18429/JACoW-IPAC2018-TUYGBD3
[n] P. Korysko, P. Burrows, and A. Latina, “Intensity Dependent Effects in the ILC BDS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 305-307. doi:10.18429/JACoW-IPAC2019-MOPGW085
[n] M. Boscolo et al., “Beam Dynamics Studies for the SPARXINO Linac”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP015, pp. XX-XX.
[n] J. L. Baelde et al., “A New Unit Access Control for GANIL and SPIRAL 2”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper G-01, pp. 357-359.
[n] R. B. Agustsson et al., “Normal Conducting Radio Frequency x-band Deflecting Cavity Fabrication and Validation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC046, pp. 3389-3391.
[n] R. B. Agustsson, J. J. Hartzell, and S. Storms, “Inductively Coupled Pulsed Energy Extraction System for 2G Wire-based Magnets”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOCA2, pp. 725-727.
[n] A. Meseck and J. Bahrdt, “Tolerance Studies of a Seeded REVOLVER-Undulator FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP008, pp. XX-XX.
[n] M. Böge, J. Chrin, M. Muñoz, and A. Streun, “Commissioning of the SLS Using CORBA Based Beam Dynamics Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB012, pp. 292-294.
[n] D. Dunning et al., “The UK XFEL conceptual design and options analysis project”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 754-757. doi:10.18429/JACoW-LINAC2024-THPB059
[n] Y. Makdisi et al., “Absolute Measurement of the Polarization of High Energy Proton Beams at RHIC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS112, pp. 4369-4371.
[n] D. Van Winkle et al., “The SLAC LINAC LLRF Controls Upgrade”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 654-657. doi:10.18429/JACoW-IBIC2016-WEPG16
[n] M. Farkhondeh et al., “Status of the MIT-Bates South Hall Ring Commissioning”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2054-2057.
[n] W. H. Li et al., “Four-Dimensional Emittance Measurements and Correction of UED Optics up to Sextupole Order”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 496-499. doi:10.18429/JACoW-IPAC2022-MOPOTK026
[n] J. Branlard et al., “LLRF Tests of XFEL Cryomodules at AMTF: First Experimental Results”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP087, pp. 1132-1134.
[n] J. C. Frisch et al., “A FPGA Based Common Platform for LCLS2 Beam Diagnostics and Controls”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 650-653. doi:10.18429/JACoW-IBIC2016-WEPG15
[n] J. Haimson, B. A. Ishii, B. L. Mecklenburg, and G. A. Stowell, “A Solid State Driven, Parasitic Oscillation Suppressed, 17 GHz High Gain TW Klystron for Stable Operation with High Gradient Linac Structures”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS084, pp. 2529-2531.
[n] B. P. Xiao et al., “HOM Consideration of 704 MHz and 2.1 GHz Cavities for LEReC Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 528-531. doi:10.18429/JACoW-IPAC2016-MOPMY009
[n] J. B. Flanz, S. Kowalski, and C. P. Sargent, “An Isochronous Beam Recirculation Magnet System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2847-2850.
[n] Y. S. Cho, J. M. Han, W. S. Park, B. H. Choi, B. S. Han, and K. H. Chung, “Conceptual Design Study of KOMAC DTL”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D008, pp. 92-94.
[n] P. P. Goryl, A. I. Wawrzyniak, M. Sj?Âstr?Âm, and T. Szymocha, “An Implementation of the Virtual Accelerator in the Tango Control System”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper MOSBC3, pp. 23-25.
[n] A. Meseck, M. Abo-Bakr, J. Bahrdt, and B. C. Kuske, “Source Characterization of BESSY Soft X-Ray FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP007, pp. XX-XX.
[n] S. Hanasz, K. Czuba, B. Gasowski, L. Z. Zembala, and H. Schlarb, “Optimisation of a Low-Noise 1.3 GHz PLL Frequency Synthesizer for the European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1595-1598. doi:10.18429/JACoW-ICALEPCS2017-THPHA092
[n] J. M. Han et al., “Development of a Low-Energy Proton Accelerator System for the Proton Engineering Frontier Project (PEFP)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB048, pp. 2832-2834.
[n] S. A. Veitzer, P. Stoltz, and P. Lebrun, “Integrated Kinetic and Plasma Dielectric Models of Electron Cloud Buildup and TE Wave Transmission”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA24, pp. 228-230.
[n] J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP023, pp. XX-XX.
[n] R. Wegner et al., “Linac4 PIMS Construction and First Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4307-4310. doi:10.18429/JACoW-IPAC2017-THPIK094
[n] S. Karabekyan, R. Pannier, J. Pflueger, N. Burandt, J. Kuhn, and A. Schoeps, “The Local Control System of an Undulator Cell for the European XFEL”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU012, pp. 450-453.
[n] H. H. Lee et al., “A Simulation for the Optimization of Bremsstrahlung Radiation for Nuclear Applications Using Laser Accelerated Electron Beam”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPB13, pp. 618-621.
[n] M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 352-354. doi:10.18429/JACoW-IPAC2017-MOPAB096
[n] E. De Ley, D. Jacobs, and M. Ounsy, “Web-based Execution of Graphical Workflows : a Modular Platform for Multifunctional Scientific Process Automation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUAAULT04, pp. 540-543.
[n] Q. Wu and I. Ben-Zvi, “Optimization of Higher Order Mode Dampers in the 56 MHz SRF Cavity for RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC086, pp. 3081-3083.
[n] J. Haimson and B. Mecklenburg, “Use of TW Output Structures for High Peak Power RF Generators”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO469, pp. 244-246.
[n] A. Pazos et al., “Software Control for a Multilayer Monochromator”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP014, pp. 110-112.
[n] D. T. Tran et al., “Some Characteristics from Orl?®ans and Li?¿ge Cyclotrons”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-12, pp. 88-91.
[n] T. Ilg et al., “Mechanical Design of the Drift-Tube Linac (DTL) for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB051, pp. 2841-2843.
[n] A. Bogomyagkov, S. Nikitin, V. Telnov, and G. Tumaikin, “Estimation of Errors in Definition of Central Mass Energy in High Precision Experiments on Colliding Beams.”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11002, pp. 276-278.
[n] M. G. Minty et al., “Precision Beam Instrumentation and Feedback-Based Beam Control at RHIC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO022, pp. 526-528.
[n] J. Tinlot and D. Green, “A Storage Ring for 10 BeV Muons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 470-476.
[n] N. Tsoupas, E. Rodger, J. Claus, H. W. Foelsche, and P. Wanderer, “Design and B-field Measurements of a Lambertson Injection Magnet for the RHIC Machine”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP11, pp. 1352-1354.
[n] M. Iwasaki et al., “The Construction Status of the SuperKEKB Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 14-17. doi:10.18429/JACoW-ICALEPCS2015-MOB3O04
[n] J. Safranek and H. Wiedemann, “Low-Emittance in SPEAR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1104-1107.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Bloess et al., “Superconducting, Hydroformed, Niobium Sputter Coated Copper Cavities at 1.5 GHz”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2057-2060.
- J. Haimson, “Optimization Criteria for Standing Wave Transverse Magnetic Deflection Cavities”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VI-06, pp. 303-331.
- J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP020, pp. XX-XX.
- J. A. MacLachlan, G. Nicholls, J. Nicholls, G. Silvestrov, and T. Vsevolozhskaya, “Pulsed High Current Optics for pbar Production at 5.4 GeV/c”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2785-2791.
- K. Furukawa and R. Rechenmacher, “Network Analyser for the EPICS Channel Access Protocol”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP008, pp. 96-98.
- C. J. R. Duncan, P. Cueva, J. M. Maxson, and D. A. Muller, “Improving Energy Resolution and Compensating Chromatic Aberration With a TM010 Microwave Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 411-413.
- G. Ciovati et al., “Design of a 915 MHz conduction-cooled cryomodule”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOP58, unpublished.
- M. Yakopov, S. Abeghyan, S. Karabekyan, J. Pflueger, and Z. Zhao, “Automation of the Magnetic Field Measurements of the Air Coils by Means of the Moving Wire System”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 114-116.
- E. Forest, H. Nishimura, D. S. Robin, Y. Wu, and A. A. Zholents, “Mini-Beta Lattice for the Femto-Second X-Ray Source at the ALS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A17, pp. 1098-1100.
- J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508.
- V. Ptitsyn et al., “eRHIC Design Status”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 628-631.
- P. Korysko, P. Burrows, and A. Latina, “Intensity Dependent Effects in the ILC BDS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 305-307.
- M. Boscolo et al., “Beam Dynamics Studies for the SPARXINO Linac”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP015, pp. XX-XX.
- J. L. Baelde et al., “A New Unit Access Control for GANIL and SPIRAL 2”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper G-01, pp. 357-359.
- R. B. Agustsson et al., “Normal Conducting Radio Frequency x-band Deflecting Cavity Fabrication and Validation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC046, pp. 3389-3391.
- R. B. Agustsson, J. J. Hartzell, and S. Storms, “Inductively Coupled Pulsed Energy Extraction System for 2G Wire-based Magnets”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOCA2, pp. 725-727.
- A. Meseck and J. Bahrdt, “Tolerance Studies of a Seeded REVOLVER-Undulator FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP008, pp. XX-XX.
- M. Böge, J. Chrin, M. Muñoz, and A. Streun, “Commissioning of the SLS Using CORBA Based Beam Dynamics Applications”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPB012, pp. 292-294.
- D. Dunning et al., “The UK XFEL conceptual design and options analysis project”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 754-757.
- Y. Makdisi et al., “Absolute Measurement of the Polarization of High Energy Proton Beams at RHIC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS112, pp. 4369-4371.
- D. Van Winkle et al., “The SLAC LINAC LLRF Controls Upgrade”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 654-657.
- M. Farkhondeh et al., “Status of the MIT-Bates South Hall Ring Commissioning”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2054-2057.
- W. H. Li et al., “Four-Dimensional Emittance Measurements and Correction of UED Optics up to Sextupole Order”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 496-499.
- J. Branlard et al., “LLRF Tests of XFEL Cryomodules at AMTF: First Experimental Results”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP087, pp. 1132-1134.
- J. C. Frisch et al., “A FPGA Based Common Platform for LCLS2 Beam Diagnostics and Controls”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 650-653.
- J. Haimson, B. A. Ishii, B. L. Mecklenburg, and G. A. Stowell, “A Solid State Driven, Parasitic Oscillation Suppressed, 17 GHz High Gain TW Klystron for Stable Operation with High Gradient Linac Structures”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS084, pp. 2529-2531.
- B. P. Xiao et al., “HOM Consideration of 704 MHz and 2.1 GHz Cavities for LEReC Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 528-531.
- J. B. Flanz, S. Kowalski, and C. P. Sargent, “An Isochronous Beam Recirculation Magnet System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2847-2850.
- Y. S. Cho, J. M. Han, W. S. Park, B. H. Choi, B. S. Han, and K. H. Chung, “Conceptual Design Study of KOMAC DTL”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D008, pp. 92-94.
- P. P. Goryl, A. I. Wawrzyniak, M. Sj?Âstr?Âm, and T. Szymocha, “An Implementation of the Virtual Accelerator in the Tango Control System”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper MOSBC3, pp. 23-25.
- A. Meseck, M. Abo-Bakr, J. Bahrdt, and B. C. Kuske, “Source Characterization of BESSY Soft X-Ray FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP007, pp. XX-XX.
- S. Hanasz, K. Czuba, B. Gasowski, L. Z. Zembala, and H. Schlarb, “Optimisation of a Low-Noise 1.3 GHz PLL Frequency Synthesizer for the European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1595-1598.
- J. M. Han et al., “Development of a Low-Energy Proton Accelerator System for the Proton Engineering Frontier Project (PEFP)”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB048, pp. 2832-2834.
- S. A. Veitzer, P. Stoltz, and P. Lebrun, “Integrated Kinetic and Plasma Dielectric Models of Electron Cloud Buildup and TE Wave Transmission”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA24, pp. 228-230.
- J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP023, pp. XX-XX.
- R. Wegner et al., “Linac4 PIMS Construction and First Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4307-4310.
- S. Karabekyan, R. Pannier, J. Pflueger, N. Burandt, J. Kuhn, and A. Schoeps, “The Local Control System of an Undulator Cell for the European XFEL”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU012, pp. 450-453.
- H. H. Lee et al., “A Simulation for the Optimization of Bremsstrahlung Radiation for Nuclear Applications Using Laser Accelerated Electron Beam”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPB13, pp. 618-621.
- M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 352-354.
- E. De Ley, D. Jacobs, and M. Ounsy, “Web-based Execution of Graphical Workflows : a Modular Platform for Multifunctional Scientific Process Automation”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUAAULT04, pp. 540-543.
- Q. Wu and I. Ben-Zvi, “Optimization of Higher Order Mode Dampers in the 56 MHz SRF Cavity for RHIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC086, pp. 3081-3083.
- J. Haimson and B. Mecklenburg, “Use of TW Output Structures for High Peak Power RF Generators”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO469, pp. 244-246.
- A. Pazos et al., “Software Control for a Multilayer Monochromator”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP014, pp. 110-112.
- D. T. Tran et al., “Some Characteristics from Orl?®ans and Li?¿ge Cyclotrons”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-12, pp. 88-91.
- T. Ilg et al., “Mechanical Design of the Drift-Tube Linac (DTL) for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB051, pp. 2841-2843.
- A. Bogomyagkov, S. Nikitin, V. Telnov, and G. Tumaikin, “Estimation of Errors in Definition of Central Mass Energy in High Precision Experiments on Colliding Beams.”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11002, pp. 276-278.
- M. G. Minty et al., “Precision Beam Instrumentation and Feedback-Based Beam Control at RHIC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO022, pp. 526-528.
- J. Tinlot and D. Green, “A Storage Ring for 10 BeV Muons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 470-476.
- N. Tsoupas, E. Rodger, J. Claus, H. W. Foelsche, and P. Wanderer, “Design and B-field Measurements of a Lambertson Injection Magnet for the RHIC Machine”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP11, pp. 1352-1354.
- M. Iwasaki et al., “The Construction Status of the SuperKEKB Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 14-17.
- J. Safranek and H. Wiedemann, “Low-Emittance in SPEAR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1104-1107.
Back to search