Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Polsky, P. J. Geoghegan, L. L. Jacobs, W. Lu, S. M. McTeer, and M. A. Plum, “Beam Stop Design Methodology and Description of a New SNS Beam Stop”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA028, pp. 1384-1386.
[n] N. S. Dikansky et al., “Influence on the Sign of an Ion Charge on Friction Force at Electron Cooling”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 529-532.
[n] Y. Chao, P. Corredoura, T. Limberg, H. Schwarz, and P. Wilson, “A Feedback for Longitudinal Instabilities in the SLC Damping Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1806-1809.
[n] P. Forck et al., “ARIES-ADA: An R&D Network for Advanced Diagnostics at Accelerators”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 71-74. doi:10.18429/JACoW-IBIC2018-MOPB02
[n] V. V. Gambaryan and A. A. Starostenko, “Fast Kicker”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1001-1003. doi:10.18429/JACoW-IPAC2015-MOPTY033
[n] C. Adolphsen and P. Corredoura, “The Proposed NLC Linac LLRF System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A08, pp. 459-461.
[n] Z. Huang, J. N. Galayda, and P. A. Heimann, “Technical Challenges in the Linac Coherent Light Source, Commissioning and Upgrades”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOBS1, pp. 724-728.
[n] S. F. Mikhailov, H. Hao, J. Y. Li, V. Popov, P. W. Wallace, and Y. K. Wu, “Protection of VUV FEL Mirrors using Soft Orbit Bump at Duke FEL/HIGS facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA074, pp. 1301-1303.
[n] T. C. Tseng et al., “The SRI Beam Size Monitor Developed at NSRRC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT059, pp. 3465-3467.
[n] S. Fu, Y. Chen, T. Yang, and Z. Zhang, “Physical Design on an RF-Linac for Far-Infrared Free Electron Laser”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-62, pp. 511-513.
[n] J. N. Galayda, “The Linac Coherent Light Source-II Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 935-937. doi:10.18429/JACoW-IPAC2014-TUOCA01
[n] R. M. Bionta, “Characterization of X-Ray FEL Radiation”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOB003, pp. XX-XX.
[n] P. V. Martyshkin and R. M. Lapik, “The Capture Efficiency of High Field Flux Concentrator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH301, pp. 2404-2405.
[n] H. Liang et al., “A High Heat Load Double Crystal Monochromator and Its Cryo Cooling System for Heps”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 430-434. doi:10.18429/JACoW-MEDSI2018-FROAMA02
[n] J. Dey, S. Dris, T. Kubicki, and J. Reid, “Linearization of the Fermilab Recycler High Level RF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB011, pp. 1204-1206.
[n] S. B. Sharma, S. C. Choure, and B. S. M. Rao, “Radiation Induced Degradation of Water Pollutants”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D055, pp. 807-809.
[n] T. C. King, J. C. Chang, S. H. Chang, J. R. Chen, F. Z. Hsiao, and H. C. Li, “Design of Cryogenic System for Several Super-Conducting Modules at National Synchrotron Radiation Research Center”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE039, pp. 2405-2407.
[n] K. Ha et al., “NSLS-II Active Interlock System and Post-Mortem Architecture”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4214-4216. doi:10.18429/JACoW-IPAC2016-THPOY048
[n] J. N. Galayda, “Status of the Linac Coherent Light Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEXM02, pp. 1939-1943.
[n] H. G. Kirk et al., “Optical Diagnostic Results from the MERIT High-Power Target Experiment”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP010, pp. 2802-2804.
[n] H. Hao, J. Y. Li, and Y. K. Wu, “New Storage Ring Lattice for the Duke FEL Wiggler Switchyard System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC047, pp. 1272-1274.
[n] G. Liu, C. Li, J. Y. Li, J. G. Wang, W. Xu, and K. Xuan, “EPICS Driver for Phoenix Contact Redundant PLC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA016, pp. 3176-3178.
[n] K. V. Gubin et al., “Project of Rotating Carbon High-Power Neutron Target. Conceptual Design.”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH034, pp. 2518-2520.
[n] S. H. Chang et al., “The Improvements of Vacuum Performance at Taiwan Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP39C, pp. 2175-2177.
[n] G. P. Skoro et al., “Tungsten Behavior at High Temperature and High Stress”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC091, pp. 4269-4271.
[n] K. Gubin et al., “Project of High Power Stationary Neutron Target of Conical Shape”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO038, pp. 2801-2803.
[n] M. S. Avilov and A. V. Novokhatski, “A Single Bunch Compression in the Exponential Field”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 971-973.
[n] B. Laluc, T. Maillard, and A. Riquer, “Piezo Technology in Synchrotron”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 321-323. doi:10.18429/JACoW-MEDSI2018-THOPMA01
[n] J. L. Sun et al., “Study with Wire Scanner and Beam Loss Monitor at CSNS-LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2598-2601. doi:10.18429/JACoW-IPAC2019-WEPGW053
[n] M. S. Avilov et al., “Project of Rotating Carbon High-Power Neutron Target. Simulation of the Target Thermal and Mechanical Operation Conditions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH123, pp. 1499-1501.
[n] A. Marinelli et al., “Twin-bunch Two-colour FEL at LCLS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1032-1036. doi:10.18429/JACoW-IPAC2016-TUZA02
[n] S. Allison, P. Corredoura, W. Ross, R. Sass, and R. Tighe, “Experience with the PEP-II RF System at High Beam Currents”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A13, pp. 1891-1893.
[n] C. Barthe-Dejean et al., “Mechanical Engineering Design and Simulation for SPIRAL2 Accelerator @GANIL”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 302-305. doi:10.18429/JACoW-MEDSI2018-THOAMA03
[n] B. Giaccone, D. Passarelli, M. Parise, T. Aiazzi, and V. Roger, “Experimental investigation of plasma processing for PIP-II SSR2 cavities”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper MOP42, unpublished.
[n] C. Lin, “Recent Progress of Compact LAser Plasma Accelerator at Peking University”, presented at the IPAC'22, Bangkok, Thailand, Jun. 2022, paper MOIYGD2, unpublished.
[n] K. V. Gubin, M. S. Avilov, P. A. Bak, N. Kh. Kot, and P. V. Logatchev, “Project of Rotating Carbon High-Power Neutron Target. Research of Graphite Properties for Production of High Intensity Neutron Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH035, pp. 2521-2523.
[n] S. Andresen, “Optimizing the PETRA IV Girder by Using Bio-Inspired Structures”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 297-301. doi:10.18429/JACoW-MEDSI2018-THOAMA01
[n] B. S. Levine and A. M. Sessler, “Excitation of a Closed Cylindrical Cavity by a Charged Ring Moving along the Axis at Constant Velocity”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1031-1034.
[n] S. Fixler, J. Healey, T. Schultheiss, and J. Szot, “Thermal Analysis of Cryogenically Cooled Linear Accelerators”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 604-607.
[n] K. Gubin et al., “High-power Proton Irradiated Solid State Rotating Neutron Target: First Tests of Converter Materials”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO037, pp. 2798-2800.
[n] C. B. Schroeder, C. Pellegrini, S. Reiche, J. Arthur, and P. Emma, “Chirped-Beam Two-Stage SASE-FEL for High Power Femtosecond X-ray Pulse Generation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH121, pp. 2757-2759.
[n] W. Tizzano, T. Connolley, S. Davies, M. Drakopoulos, and G. E. Howell, “Design and FEA of an Innovative Rotating Sic Filter for High-Energy X-Ray Beam”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 306-311. doi:10.18429/JACoW-MEDSI2018-THOAMA04
[n] P. V. Logachev, M. S. Avilov, M. B. Blinov, P. Martyshkin, and T. A. Vsevolozhskaya, “Ultimate Abilities of Conventional Positron Sources”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUC3MA03, pp. 97-99.
[n] G. L. Dou et al., “Status Report on the Cyclotron Injector for HIMM”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THBI02, pp. 269-273.
[n] E. A. Nanni et al., “Linear Electron Acceleration in THz Waveguides”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1896-1899. doi:10.18429/JACoW-IPAC2014-WEOAB03
[n] V. V. Gambaryan and A. A. Starostenko, “Fast Kicker for High Current Beam Manipulation: Experimental Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 5019-5021. doi:10.18429/JACoW-IPAC2018-FRXGBD2
[n] M. Stirbet et al., “Testing Procedures and Results of the Prototype Fundamental Power Coupler for the Spallation Neutron Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH148, pp. 1125-1127.
[n] T. R. Edgecock, J. J. Back, J. R. J. Bennett, C. N. Booth, S. J. Brooks, and G. P. Skoro, “Overview of Solid Target Studies for a Neutrino Factory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC089, pp. 4263-4265.
[n] J. N. Galayda, “The First Angstrom X-Ray Free-Electron Laser”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOYAMH01, pp. 11-15.
[n] J. N. Galayda, “The New LCLS-II Project : Status and Challenges”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUIOA04, pp. 404-408.
[n] H. Du, Q. Y. Kong, Z. S. Li, K. D. Wang, and X. Yin, “RF Design and Cold Model Measurement of an IH-DTL for HIMM Injector”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 329-331. doi:10.18429/JACoW-LINAC2018-TUPO004
[n] J. D. Fox and P. Corredoura, “Amplification and Damping of Synchrotron Oscillations via a Parametric Process”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1079-1082.
[n] H. P. Hsueh, C.-H. Chang, J.-R. Chen, G.-Y. Hsiung, C.-K. Kuan, and T.-S. Ueng, “Optimization for Taiwan Photon Source Electron Beam Position Monitors through Numerical Simulation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS065, pp. 3436-3438.
[n] P. Wesolowski, I. Birkel, E. Huttel, A.-S. M??ller, M. Pont, and F. P?®rez, “A Vertical Multi-Bunch Feedback System for ANKA”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP001, pp. 761-763.
[n] C.-S. Huang, B.-Y. Chen, C.-J. Lin, C.-K. Kuan, T.-C. Tseng, and W.-Y. Lai, “Improving the uniformity of magnetron sputtering titanium film for nonlinear injection kicker”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3791-3793. doi:10.18429/JACoW-IPAC2024-THPS25
[n] J. N. Galayda, “The LCLS-II: A High Power Upgrade to the LCLS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 18-23. doi:10.18429/JACoW-IPAC2018-MOYGB2
[n] L. M. Yang et al., “The Present Applications of IR FEL at Peking University”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THBOS04, pp. XX-XX.
[n] M. S. Avilov et al., “Test of Materials for the High Temperature Intense Neutron Target Converter”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP17001, pp. XX-XX.
[n] B. Giaccone, A. Grassellino, S. Posen, and A. S. Romanenko, “Dark Matter and Gravitational Waves Experiments with SRF Cavities”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper THIXA06, unpublished.
[n] J. L. Sun et al., “Commissioning of the Beam Instrumentation System of CSNS”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 7-10. doi:10.18429/JACoW-IBIC2020-MOAO03
[n] J. N. Galayda, L. N. Blumberg, R. N. Heese, and H. C. H. Hsieh, “Beam Optical Properties of the NSLS Dipoles”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2593-2596.
[n] C.-K. Chan et al., “An IGBT pulser for the nonlinear in-vacuum kicker at Taiwan Photon Source”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 72-74. doi:10.18429/JACoW-IPAC2025-MOPB002
[n] R. M. Lapik and P. V. Martyshkin, “Impulse Magnet of Positron Source with Adiabatic Field Decreasing”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA130, pp. 2170-2171.
[n] C.-M. Cheng et al., “The status of the X-ray beam position monitor in the TPS front end”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1327-1329. doi:10.18429/JACoW-IPAC2024-TUPG42
[n] A. D'Elia, J. Jacob, and V. Serri?¿re, “ESRF-EBS 352 MHz HOM Damped RF Cavities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1034-1036. doi:10.18429/JACoW-IPAC2021-MOPAB333
[n] V. V. Tarnetsky, V. Auslender, I. Makarov, and M. A. Tiunov, “Numerical Study of Coupling Slot Effects on Beam Dynamics in Industrial Accelerator Prototype”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT019, pp. 1622-1624.
[n] S. Simrock, M. O, J. Perry, and K. Crawford, “The CEBAF Analog Monitor System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1925-1928.
[n] B.-Y. Chen et al., “Modification of TPS arc-cell vacuum system for installation of EPU66”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1572-1574. doi:10.18429/JACoW-IPAC2024-TUPR61
[n] C.-S. Huang, B.-Y. Chen, C.-K. Kuan, W.-Y. Lai, T.-C. Tseng, and H.-S. Wang, “Anodic bonding of silicon and glass for bent monochromator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4953-4956. doi:10.18429/JACoW-IPAC2023-THPM028
[n] K. D. Wang, H. Du, Q. Y. Kong, X. N. Li, Z. S. Li, and X. Yin, “Error Analysis and RF Optimization of a Compact RFQ”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 155-157. doi:10.18429/JACoW-HIAT2018-WEPB12
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Polsky, P. J. Geoghegan, L. L. Jacobs, W. Lu, S. M. McTeer, and M. A. Plum, “Beam Stop Design Methodology and Description of a New SNS Beam Stop”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA028, pp. 1384-1386.
- N. S. Dikansky et al., “Influence on the Sign of an Ion Charge on Friction Force at Electron Cooling”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 529-532.
- Y. Chao, P. Corredoura, T. Limberg, H. Schwarz, and P. Wilson, “A Feedback for Longitudinal Instabilities in the SLC Damping Rings”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1806-1809.
- P. Forck et al., “ARIES-ADA: An R&D Network for Advanced Diagnostics at Accelerators”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 71-74.
- V. V. Gambaryan and A. A. Starostenko, “Fast Kicker”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1001-1003.
- C. Adolphsen and P. Corredoura, “The Proposed NLC Linac LLRF System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6A08, pp. 459-461.
- Z. Huang, J. N. Galayda, and P. A. Heimann, “Technical Challenges in the Linac Coherent Light Source, Commissioning and Upgrades”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOBS1, pp. 724-728.
- S. F. Mikhailov, H. Hao, J. Y. Li, V. Popov, P. W. Wallace, and Y. K. Wu, “Protection of VUV FEL Mirrors using Soft Orbit Bump at Duke FEL/HIGS facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA074, pp. 1301-1303.
- T. C. Tseng et al., “The SRI Beam Size Monitor Developed at NSRRC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT059, pp. 3465-3467.
- S. Fu, Y. Chen, T. Yang, and Z. Zhang, “Physical Design on an RF-Linac for Far-Infrared Free Electron Laser”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-62, pp. 511-513.
- J. N. Galayda, “The Linac Coherent Light Source-II Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 935-937.
- R. M. Bionta, “Characterization of X-Ray FEL Radiation”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THOB003, pp. XX-XX.
- P. V. Martyshkin and R. M. Lapik, “The Capture Efficiency of High Field Flux Concentrator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH301, pp. 2404-2405.
- H. Liang et al., “A High Heat Load Double Crystal Monochromator and Its Cryo Cooling System for Heps”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 430-434.
- J. Dey, S. Dris, T. Kubicki, and J. Reid, “Linearization of the Fermilab Recycler High Level RF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB011, pp. 1204-1206.
- S. B. Sharma, S. C. Choure, and B. S. M. Rao, “Radiation Induced Degradation of Water Pollutants”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D055, pp. 807-809.
- T. C. King, J. C. Chang, S. H. Chang, J. R. Chen, F. Z. Hsiao, and H. C. Li, “Design of Cryogenic System for Several Super-Conducting Modules at National Synchrotron Radiation Research Center”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE039, pp. 2405-2407.
- K. Ha et al., “NSLS-II Active Interlock System and Post-Mortem Architecture”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4214-4216.
- J. N. Galayda, “Status of the Linac Coherent Light Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEXM02, pp. 1939-1943.
- H. G. Kirk et al., “Optical Diagnostic Results from the MERIT High-Power Target Experiment”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP010, pp. 2802-2804.
- H. Hao, J. Y. Li, and Y. K. Wu, “New Storage Ring Lattice for the Duke FEL Wiggler Switchyard System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC047, pp. 1272-1274.
- G. Liu, C. Li, J. Y. Li, J. G. Wang, W. Xu, and K. Xuan, “EPICS Driver for Phoenix Contact Redundant PLC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA016, pp. 3176-3178.
- K. V. Gubin et al., “Project of Rotating Carbon High-Power Neutron Target. Conceptual Design.”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH034, pp. 2518-2520.
- S. H. Chang et al., “The Improvements of Vacuum Performance at Taiwan Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP39C, pp. 2175-2177.
- G. P. Skoro et al., “Tungsten Behavior at High Temperature and High Stress”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC091, pp. 4269-4271.
- K. Gubin et al., “Project of High Power Stationary Neutron Target of Conical Shape”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO038, pp. 2801-2803.
- M. S. Avilov and A. V. Novokhatski, “A Single Bunch Compression in the Exponential Field”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 971-973.
- B. Laluc, T. Maillard, and A. Riquer, “Piezo Technology in Synchrotron”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 321-323.
- J. L. Sun et al., “Study with Wire Scanner and Beam Loss Monitor at CSNS-LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2598-2601.
- M. S. Avilov et al., “Project of Rotating Carbon High-Power Neutron Target. Simulation of the Target Thermal and Mechanical Operation Conditions”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH123, pp. 1499-1501.
- A. Marinelli et al., “Twin-bunch Two-colour FEL at LCLS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1032-1036.
- S. Allison, P. Corredoura, W. Ross, R. Sass, and R. Tighe, “Experience with the PEP-II RF System at High Beam Currents”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A13, pp. 1891-1893.
- C. Barthe-Dejean et al., “Mechanical Engineering Design and Simulation for SPIRAL2 Accelerator @GANIL”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 302-305.
- B. Giaccone, D. Passarelli, M. Parise, T. Aiazzi, and V. Roger, “Experimental investigation of plasma processing for PIP-II SSR2 cavities”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOP42, unpublished.
- C. Lin, “Recent Progress of Compact LAser Plasma Accelerator at Peking University”, presented at the 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, paper MOIYGD2, unpublished.
- K. V. Gubin, M. S. Avilov, P. A. Bak, N. Kh. Kot, and P. V. Logatchev, “Project of Rotating Carbon High-Power Neutron Target. Research of Graphite Properties for Production of High Intensity Neutron Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH035, pp. 2521-2523.
- S. Andresen, “Optimizing the PETRA IV Girder by Using Bio-Inspired Structures”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 297-301.
- B. S. Levine and A. M. Sessler, “Excitation of a Closed Cylindrical Cavity by a Charged Ring Moving along the Axis at Constant Velocity”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1031-1034.
- S. Fixler, J. Healey, T. Schultheiss, and J. Szot, “Thermal Analysis of Cryogenically Cooled Linear Accelerators”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 604-607.
- K. Gubin et al., “High-power Proton Irradiated Solid State Rotating Neutron Target: First Tests of Converter Materials”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO037, pp. 2798-2800.
- C. B. Schroeder, C. Pellegrini, S. Reiche, J. Arthur, and P. Emma, “Chirped-Beam Two-Stage SASE-FEL for High Power Femtosecond X-ray Pulse Generation”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH121, pp. 2757-2759.
- W. Tizzano, T. Connolley, S. Davies, M. Drakopoulos, and G. E. Howell, “Design and FEA of an Innovative Rotating Sic Filter for High-Energy X-Ray Beam”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 306-311.
- P. V. Logachev, M. S. Avilov, M. B. Blinov, P. Martyshkin, and T. A. Vsevolozhskaya, “Ultimate Abilities of Conventional Positron Sources”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUC3MA03, pp. 97-99.
- G. L. Dou et al., “Status Report on the Cyclotron Injector for HIMM”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THBI02, pp. 269-273.
- E. A. Nanni et al., “Linear Electron Acceleration in THz Waveguides”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1896-1899.
- V. V. Gambaryan and A. A. Starostenko, “Fast Kicker for High Current Beam Manipulation: Experimental Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 5019-5021.
- M. Stirbet et al., “Testing Procedures and Results of the Prototype Fundamental Power Coupler for the Spallation Neutron Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH148, pp. 1125-1127.
- T. R. Edgecock, J. J. Back, J. R. J. Bennett, C. N. Booth, S. J. Brooks, and G. P. Skoro, “Overview of Solid Target Studies for a Neutrino Factory”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC089, pp. 4263-4265.
- J. N. Galayda, “The First Angstrom X-Ray Free-Electron Laser”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOYAMH01, pp. 11-15.
- J. N. Galayda, “The New LCLS-II Project : Status and Challenges”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUIOA04, pp. 404-408.
- H. Du, Q. Y. Kong, Z. S. Li, K. D. Wang, and X. Yin, “RF Design and Cold Model Measurement of an IH-DTL for HIMM Injector”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 329-331.
- J. D. Fox and P. Corredoura, “Amplification and Damping of Synchrotron Oscillations via a Parametric Process”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1079-1082.
- H. P. Hsueh, C.-H. Chang, J.-R. Chen, G.-Y. Hsiung, C.-K. Kuan, and T.-S. Ueng, “Optimization for Taiwan Photon Source Electron Beam Position Monitors through Numerical Simulation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS065, pp. 3436-3438.
- P. Wesolowski, I. Birkel, E. Huttel, A.-S. M??ller, M. Pont, and F. P?®rez, “A Vertical Multi-Bunch Feedback System for ANKA”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP001, pp. 761-763.
- C.-S. Huang, B.-Y. Chen, C.-J. Lin, C.-K. Kuan, T.-C. Tseng, and W.-Y. Lai, “Improving the uniformity of magnetron sputtering titanium film for nonlinear injection kicker”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS25, pp. 3791-3793.
- J. N. Galayda, “The LCLS-II: A High Power Upgrade to the LCLS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 18-23.
- L. M. Yang et al., “The Present Applications of IR FEL at Peking University”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THBOS04, pp. XX-XX.
- M. S. Avilov et al., “Test of Materials for the High Temperature Intense Neutron Target Converter”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP17001, pp. XX-XX.
- B. Giaccone, A. Grassellino, S. Posen, and A. S. Romanenko, “Dark Matter and Gravitational Waves Experiments with SRF Cavities”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper THIXA06, unpublished.
- J. L. Sun et al., “Commissioning of the Beam Instrumentation System of CSNS”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 7-10.
- J. N. Galayda, L. N. Blumberg, R. N. Heese, and H. C. H. Hsieh, “Beam Optical Properties of the NSLS Dipoles”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2593-2596.
- C.-K. Chan et al., “An IGBT pulser for the nonlinear in-vacuum kicker at Taiwan Photon Source”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB002, pp. 72-74.
- R. M. Lapik and P. V. Martyshkin, “Impulse Magnet of Positron Source with Adiabatic Field Decreasing”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA130, pp. 2170-2171.
- C.-M. Cheng et al., “The status of the X-ray beam position monitor in the TPS front end”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG42, pp. 1327-1329.
- A. D'Elia, J. Jacob, and V. Serri?¿re, “ESRF-EBS 352 MHz HOM Damped RF Cavities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1034-1036.
- V. V. Tarnetsky, V. Auslender, I. Makarov, and M. A. Tiunov, “Numerical Study of Coupling Slot Effects on Beam Dynamics in Industrial Accelerator Prototype”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT019, pp. 1622-1624.
- S. Simrock, M. O, J. Perry, and K. Crawford, “The CEBAF Analog Monitor System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1925-1928.
- B.-Y. Chen et al., “Modification of TPS arc-cell vacuum system for installation of EPU66”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR61, pp. 1572-1574.
- C.-S. Huang, B.-Y. Chen, C.-K. Kuan, W.-Y. Lai, T.-C. Tseng, and H.-S. Wang, “Anodic bonding of silicon and glass for bent monochromator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM028, pp. 4953-4956.
- K. D. Wang, H. Du, Q. Y. Kong, X. N. Li, Z. S. Li, and X. Yin, “Error Analysis and RF Optimization of a Compact RFQ”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 155-157.
Back to search