Favourites
For Word
[n] N. Iida and M. Kikuchi, “Beam-Based Optics Correction for New Beam Transport Line from LINAC to Photon Factory in KEK”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP023, pp. 85-87.
[n] T. Hakulinen et al., “Towards a Unified General Purpose CAD System at CERN”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT019, pp. 1864-1866.
[n] T. Miyao, Z. Igarashi, T. Toyama, and A. Miura, “Beam Position Monitors for the ACS Section of the J-PARC Linac”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD18, pp. 341-343.
[n] J. N. Weaver et al., “The Linac and Booster RF Systems for a Dedicated Injector for SPEAR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 769-772.
[n] M. W. Guetg, B. Beutner, E. Prat, and S. Reiche, “Dispersion Based Beam Tilt Correction”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO24, pp. 267-270.
[n] Th. Weiler et al., “Beam Loss Response Measurements with an LHC Prototype Collimator in the SPS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN107, pp. 1622-1624.
[n] S. Telfer, G. Andonian, P. Frigola, S. Reiche, and J. B. Rosenzweig, “Commissioning of the UCLA PEGASUS Photoinjector Laboratory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH074, pp. 2263-2265.
[n] T.-S. Ueng, J.-C. Chang, J.-M. Lee, and Y.-C. Lin, “Investigation and Analysis of TLS Electric Power System Harmonics”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB078, pp. 4050-4052.
[n] G. Stover, J. Halliwell, B. Ludewigt, M. Nyman, and R. Stradtner, “Operational Results of an Improved Regulator and Trigger System for the 'Fast' Raster Scanning Power Supply System Constructed at the Bevalac Biomedical Facility”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 943-946.
[n] H.-J. Kwon, Y.-S. Cho, I.-S. Hong, H. S. Kim, K. T. Seol, and Y.-G. Song, “Control Characteristics of the PEFP RF System”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA119, pp. 485-487.
[n] L. K. Grob et al., “Dust Analysis from LHC Vacuum System to Identify the Source of Macro-Particle-Beam-Interactions”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1082-1085. doi:10.18429/JACoW-IPAC2019-MOPTS094
[n] R. Ganter et al., “Preliminary Results on a Low Emittance Gun Based on Field Emission”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF005, pp. 306-308.
[n] M. Pekeler, K. Dunkel, M. Peiniger, C. Piel, H. Vogel, and P. vom Stein, “RF activities of ACCEL Instruments in Asia-Pacific”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA104, pp. 791-793.
[n] F. L. Krawczyk et al., “RF-loss Measurements in an Open Coaxial Resonator for Characterization of Copper Plating”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS021, pp. 2376-2378.
[n] M. Yamamoto et al., “High Power Test of MA Cavity for J-PARC RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH131, pp. 1322-1324.
[n] S. L. Kramer, B. Burnham, V. N. Litvinenko, C. B. McKee, and Y. Wu, “Bunch Current Density Measurements in the VUV Light Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1696-1699.
[n] N. Fukunishi et al., “New High-energy Beam Transport Line Dedicated to Biological Applications in RIKEN RI Beam Factory”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA04, pp. 42-44.
[n] E. W. Nissen, S. Bernal, B. Erdelyi, and D. F. Sutter, “Single Particle Dynamics in the University of Maryland Electron Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP086, pp. 3904-3906.
[n] A. S. Hofler, P. Evtushenko, and F. Marhauser, “Optimizing SRF Gun Cavity Profiles in a Genetic Algorithm Framework”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC020, pp. 296-299.
[n] N. I. Moseiko et al., “Upgrade System of Vacuum Monitoring of Synchrotron Radiation Sources of National Research Centre Kurchatov Institute”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC050, pp. 1183-1185.
[n] T. C. Fan, C. S. Hwang, and P. K. Tseng, “A Simple Magnet Multipole Measurement System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2244-2247.
[n] C. S. Hwang, T. C. Fan, F. Y. Lin, S. Yeh, H. H. Chen, and C. H. Chang, “A Long Loop Coil System for Insertion Device Magnet Measurement”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E105, pp. 283-285.
[n] M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Iida and M. Kikuchi, “Beam-Based Optics Correction for New Beam Transport Line from LINAC to Photon Factory in KEK”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP023, pp. 85-87.
- T. Hakulinen et al., “Towards a Unified General Purpose CAD System at CERN”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT019, pp. 1864-1866.
- T. Miyao, Z. Igarashi, T. Toyama, and A. Miura, “Beam Position Monitors for the ACS Section of the J-PARC Linac”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD18, pp. 341-343.
- J. N. Weaver et al., “The Linac and Booster RF Systems for a Dedicated Injector for SPEAR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 769-772.
- M. W. Guetg, B. Beutner, E. Prat, and S. Reiche, “Dispersion Based Beam Tilt Correction”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO24, pp. 267-270.
- Th. Weiler et al., “Beam Loss Response Measurements with an LHC Prototype Collimator in the SPS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN107, pp. 1622-1624.
- S. Telfer, G. Andonian, P. Frigola, S. Reiche, and J. B. Rosenzweig, “Commissioning of the UCLA PEGASUS Photoinjector Laboratory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH074, pp. 2263-2265.
- T.-S. Ueng, J.-C. Chang, J.-M. Lee, and Y.-C. Lin, “Investigation and Analysis of TLS Electric Power System Harmonics”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB078, pp. 4050-4052.
- G. Stover, J. Halliwell, B. Ludewigt, M. Nyman, and R. Stradtner, “Operational Results of an Improved Regulator and Trigger System for the 'Fast' Raster Scanning Power Supply System Constructed at the Bevalac Biomedical Facility”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 943-946.
- H.-J. Kwon, Y.-S. Cho, I.-S. Hong, H. S. Kim, K. T. Seol, and Y.-G. Song, “Control Characteristics of the PEFP RF System”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA119, pp. 485-487.
- L. K. Grob et al., “Dust Analysis from LHC Vacuum System to Identify the Source of Macro-Particle-Beam-Interactions”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1082-1085.
- R. Ganter et al., “Preliminary Results on a Low Emittance Gun Based on Field Emission”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF005, pp. 306-308.
- M. Pekeler, K. Dunkel, M. Peiniger, C. Piel, H. Vogel, and P. vom Stein, “RF activities of ACCEL Instruments in Asia-Pacific”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA104, pp. 791-793.
- F. L. Krawczyk et al., “RF-loss Measurements in an Open Coaxial Resonator for Characterization of Copper Plating”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS021, pp. 2376-2378.
- M. Yamamoto et al., “High Power Test of MA Cavity for J-PARC RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH131, pp. 1322-1324.
- S. L. Kramer, B. Burnham, V. N. Litvinenko, C. B. McKee, and Y. Wu, “Bunch Current Density Measurements in the VUV Light Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1696-1699.
- N. Fukunishi et al., “New High-energy Beam Transport Line Dedicated to Biological Applications in RIKEN RI Beam Factory”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA04, pp. 42-44.
- E. W. Nissen, S. Bernal, B. Erdelyi, and D. F. Sutter, “Single Particle Dynamics in the University of Maryland Electron Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP086, pp. 3904-3906.
- A. S. Hofler, P. Evtushenko, and F. Marhauser, “Optimizing SRF Gun Cavity Profiles in a Genetic Algorithm Framework”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC020, pp. 296-299.
- N. I. Moseiko et al., “Upgrade System of Vacuum Monitoring of Synchrotron Radiation Sources of National Research Centre Kurchatov Institute”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC050, pp. 1183-1185.
- T. C. Fan, C. S. Hwang, and P. K. Tseng, “A Simple Magnet Multipole Measurement System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2244-2247.
- C. S. Hwang, T. C. Fan, F. Y. Lin, S. Yeh, H. H. Chen, and C. H. Chang, “A Long Loop Coil System for Insertion Device Magnet Measurement”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E105, pp. 283-285.
- M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398.
Back to search