Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. J. Barnes and G. D. Wait, “Results of Calculations on the Beam Deflection Due to the 1 MHz Chopper for the Koan Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 967-970.
[n] K. Aulenbacher et al., “Results from the CLIC Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY01T, pp. 42-46.
[n] N. Andreev et al., “The 1 m Long Single Aperture Dipole Coil Test Program for LHC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP027G, pp. 2258-2260.
[n] V. P. Suller et al., “Status of the CAMD Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE050, pp. 3103-3105.
[n] M. Sapinski et al., “Estimation of Thresholds for the Signals of the BLMs around the LHC Final Focus Triplet Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR037, pp. 4053-4055.
[n] R. Maier, B. Seligmann, and H. J. Stein, “Electron Cooling in COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1580-1583.
[n] M. J. Barnes and G. D. Wait, “Design and Measurements of a Damping Ring Kicker for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAC01, pp. 846-848.
[n] H. H. Braun, S. Rosander, and M. Valentini, “Second Order Beam-Loading Compensation in the Drive-Beam Accelerator of the CLIC Test Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7B04, pp. 510-512.
[n] V. N. Litvinenko, “Performance of High Intensity γ-Rays Source Driven by the Duke Storage Ring FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA010, pp. 657-659.
[n] M. J. Barnes, F. Caspers, L. Ducimetiere, N. Garrel, and T. Kroyer, “An Improved Beam Screen for the LHC Injection Kickers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN086, pp. 1574-1576.
[n] Y.-N. Rao and R. A. Baartman, “Transverse Phase Space Tomography in TRIUMF Injection Beamline”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC064, pp. 1144-1146.
[n] H. H. J. Ten Kate et al., “Development of a 10 T Nb3Sn Twin Aperture Model Dipole Magnet for the CERN LHC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1157-1160.
[n] J.-C. Huang, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “Realization of temperature compensated TPS correction magnet power supply”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3782-3784. doi:10.18429/JACoW-IPAC2023-WEPM089
[n] C.-Y. Liu, Y. S. Wong, J.-C. Huang, and K.-B. Liu, “Analysis of the bi-bridge topology and power device circuit of the TPS booster dipole power supply”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3779-3781. doi:10.18429/JACoW-IPAC2023-WEPM088
[n] S. F. Mikhailov, V. N. Litvinenko, and Y. Wu, “Low Emittance Lattices for the Duke FEL Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH125, pp. 3528-3530.
[n] J. Takacs, “Beam Scanner for the Oxford Electrostatic Tandem Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 980-985.
[n] B. Dehning, G. Mugnai, and F. Roncarolo, “High Accuracy Field Mappings with a Laser Monitored Travelling Mole”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B09, pp. 409-411.
[n] R. Bossart, H. H. Braun, M. Chanudet-Cayla, G. Guignard, J. A. Riche, and M. Valentini, “Simulation of the CTF Drive Beam Line and Comparison with the Experiment”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B16, pp. 1393-1395.
[n] S. L. Kramer, B. Burnham, V. N. Litvinenko, C. B. McKee, and Y. Wu, “Bunch Current Density Measurements in the VUV Light Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1696-1699.
[n] V. N. Litvinenko, S. H. Park, Y. Wu, and I. V. Pinayev, “The Duke XUV FEL Storage Ring Facility”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D066, pp. 834-836.
[n] L. Calabretta and D. Rifuggiato, “Status and Future Plans at LNS Catania”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-2, pp. XX-XX.
[n] R. K. Bhandari, “Status of the Calcutta K500 Superconduction Cyclotron Project”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-4, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- M. J. Barnes and G. D. Wait, “Results of Calculations on the Beam Deflection Due to the 1 MHz Chopper for the Koan Factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 967-970.
- K. Aulenbacher et al., “Results from the CLIC Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUY01T, pp. 42-46.
- N. Andreev et al., “The 1 m Long Single Aperture Dipole Coil Test Program for LHC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP027G, pp. 2258-2260.
- V. P. Suller et al., “Status of the CAMD Light Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE050, pp. 3103-3105.
- M. Sapinski et al., “Estimation of Thresholds for the Signals of the BLMs around the LHC Final Focus Triplet Magnets”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR037, pp. 4053-4055.
- R. Maier, B. Seligmann, and H. J. Stein, “Electron Cooling in COSY-Juelich”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1580-1583.
- M. J. Barnes and G. D. Wait, “Design and Measurements of a Damping Ring Kicker for the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOAC01, pp. 846-848.
- H. H. Braun, S. Rosander, and M. Valentini, “Second Order Beam-Loading Compensation in the Drive-Beam Accelerator of the CLIC Test Facility”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7B04, pp. 510-512.
- V. N. Litvinenko, “Performance of High Intensity γ-Rays Source Driven by the Duke Storage Ring FEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAA010, pp. 657-659.
- M. J. Barnes, F. Caspers, L. Ducimetiere, N. Garrel, and T. Kroyer, “An Improved Beam Screen for the LHC Injection Kickers”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN086, pp. 1574-1576.
- Y.-N. Rao and R. A. Baartman, “Transverse Phase Space Tomography in TRIUMF Injection Beamline”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC064, pp. 1144-1146.
- H. H. J. Ten Kate et al., “Development of a 10 T Nb3Sn Twin Aperture Model Dipole Magnet for the CERN LHC”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1157-1160.
- J.-C. Huang, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “Realization of temperature compensated TPS correction magnet power supply”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM089, pp. 3782-3784.
- C.-Y. Liu, Y. S. Wong, J.-C. Huang, and K.-B. Liu, “Analysis of the bi-bridge topology and power device circuit of the TPS booster dipole power supply”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM088, pp. 3779-3781.
- S. F. Mikhailov, V. N. Litvinenko, and Y. Wu, “Low Emittance Lattices for the Duke FEL Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH125, pp. 3528-3530.
- J. Takacs, “Beam Scanner for the Oxford Electrostatic Tandem Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 980-985.
- B. Dehning, G. Mugnai, and F. Roncarolo, “High Accuracy Field Mappings with a Laser Monitored Travelling Mole”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B09, pp. 409-411.
- R. Bossart, H. H. Braun, M. Chanudet-Cayla, G. Guignard, J. A. Riche, and M. Valentini, “Simulation of the CTF Drive Beam Line and Comparison with the Experiment”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B16, pp. 1393-1395.
- S. L. Kramer, B. Burnham, V. N. Litvinenko, C. B. McKee, and Y. Wu, “Bunch Current Density Measurements in the VUV Light Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1696-1699.
- V. N. Litvinenko, S. H. Park, Y. Wu, and I. V. Pinayev, “The Duke XUV FEL Storage Ring Facility”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D066, pp. 834-836.
- L. Calabretta and D. Rifuggiato, “Status and Future Plans at LNS Catania”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper C-2, pp. XX-XX.
- R. K. Bhandari, “Status of the Calcutta K500 Superconduction Cyclotron Project”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper C-4, pp. XX-XX.
Back to search