Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. O. Calcoen, S. Gabourin, and A. P. Siemko, “CERN Beam Interlock Redundant Dump Trigger Module Performance during LHC Run 2”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4189-4191. doi:10.18429/JACoW-IPAC2016-THPOY041
[n] R. Schultz and P. Hurh, “Lithium Collection Lens Filling Process for Fermilab Antiproton Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG012, pp. 1449-1451.
[n] M. Tobiyama, T. Kasuga, T. Katsura, T. Obina, and T. Takeo, “Measurement of Bunch Time-Structure in KEK PF”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1338-1341.
[n] G. Gemme, R. Parodi, Ph. Bernard, and E. Picasso, “Two Coupled Superconducting Cavities as a Gravitational Wave Detector: First Experimental Results”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP009, pp. 167-173.
[n] V. Zhabitsky, “Transient Beam Response in Synchrotrons with a Digital Transverse Feedback System”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUBCH01, pp. 73-75.
[n] N. Awaji, T. Iida, Y. Kijima, T. Kishimoto, M. Kodaira, and H. Tsuchidate, “High Current Beam Storage Experiments in SORTEC CR Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 348-351.
[n] M. H. Rashid and A. Chakrabarti, “Simulation of Sufficient Spindle Cusp Magnetic Field for 28 GHz ECRIS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT013, pp. 180-182.
[n] R. Biscardi et al., “Progress on Bunch Lengthening at the NSLS VUV Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1326-1329.
[n] J.-C. Denard, L. Cassinari, F. Dohou, N. Hubert, N. L. Leclercq, and D. Pedeau, “Preliminary Tests of a New Kind of BPM System for SOLEIL”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM007, pp. XX-XX.
[n] M. Thomas, R. Biscardi, R. D, J. Keane, P. Mortazavi, and J. Rose, “SXLS RF Cavity and System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 804-807.
[n] A. Akiyama, T. Katoh, Ta. Kubo, S. Kurokawa, T. Nakamura, and M. Yoshida, “Magnet Power Supply System for KEK-B Accelerator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP21G, pp. 2085-2090.
[n] T. Bogey and O. R. Jones, “The Beam Position System of the CERN Neutrino to Gran Sasso Proton Beam Line”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB31, pp. 141-143.
[n] H. Yonehara and T. Kasuga, “Beam Quality in Single Bunch Mode of UVSOR Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 924-926.
[n] H. Ogawa, N. Sei, K. W. Watanabe, K. Y. Yamada, and M. Y. Yasumoto, “Real-Time Observation of Surface Chemical Reactions with FEL-Induced Photoelectron Emission Microscopy”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP011, pp. XX-XX.
[n] T. Kasuga, “B-Clock System for the KEK Main Ring”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1742-1745.
[n] U. Ratzinger, N. Gaertner, R. Geier, H. Morinaga, and E. Nolte, “The Upgraded Munich Linear Heavy Ion Postaccelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 367-369.
[n] D. Kayran and V. Litvinenko, “Merger System Optimization in BNL's High Current R&D ERL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS097, pp. 3711-3713.
[n] M. H. Rashid and R. K. Bhandari, “Profile of Loss Cone on Plasma Surface of the 14.4 GHz ECR Ion Source in Kolkata”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-05, pp. XX-XX.
[n] A. Willner et al., “High Repetition Rate Seeding of a Free-Electron Laser at DESY Hamburg”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE007, pp. 2158-2160.
[n] M. Kotur et al., “Photocathode Laser Pulse Shaping for Improved Emittance”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 84-86. doi:10.18429/JACoW-LINAC2018-MOPO027
For LaTeX
Use Complete Form
For BibTeX
References
- D. O. Calcoen, S. Gabourin, and A. P. Siemko, “CERN Beam Interlock Redundant Dump Trigger Module Performance during LHC Run 2”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4189-4191.
- R. Schultz and P. Hurh, “Lithium Collection Lens Filling Process for Fermilab Antiproton Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG012, pp. 1449-1451.
- M. Tobiyama, T. Kasuga, T. Katsura, T. Obina, and T. Takeo, “Measurement of Bunch Time-Structure in KEK PF”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1338-1341.
- G. Gemme, R. Parodi, Ph. Bernard, and E. Picasso, “Two Coupled Superconducting Cavities as a Gravitational Wave Detector: First Experimental Results”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP009, pp. 167-173.
- V. Zhabitsky, “Transient Beam Response in Synchrotrons with a Digital Transverse Feedback System”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUBCH01, pp. 73-75.
- N. Awaji, T. Iida, Y. Kijima, T. Kishimoto, M. Kodaira, and H. Tsuchidate, “High Current Beam Storage Experiments in SORTEC CR Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 348-351.
- M. H. Rashid and A. Chakrabarti, “Simulation of Sufficient Spindle Cusp Magnetic Field for 28 GHz ECRIS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT013, pp. 180-182.
- R. Biscardi et al., “Progress on Bunch Lengthening at the NSLS VUV Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1326-1329.
- J.-C. Denard, L. Cassinari, F. Dohou, N. Hubert, N. L. Leclercq, and D. Pedeau, “Preliminary Tests of a New Kind of BPM System for SOLEIL”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM007, pp. XX-XX.
- M. Thomas, R. Biscardi, R. D, J. Keane, P. Mortazavi, and J. Rose, “SXLS RF Cavity and System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 804-807.
- A. Akiyama, T. Katoh, Ta. Kubo, S. Kurokawa, T. Nakamura, and M. Yoshida, “Magnet Power Supply System for KEK-B Accelerator”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP21G, pp. 2085-2090.
- T. Bogey and O. R. Jones, “The Beam Position System of the CERN Neutrino to Gran Sasso Proton Beam Line”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB31, pp. 141-143.
- H. Yonehara and T. Kasuga, “Beam Quality in Single Bunch Mode of UVSOR Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 924-926.
- H. Ogawa, N. Sei, K. W. Watanabe, K. Y. Yamada, and M. Y. Yasumoto, “Real-Time Observation of Surface Chemical Reactions with FEL-Induced Photoelectron Emission Microscopy”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP011, pp. XX-XX.
- T. Kasuga, “B-Clock System for the KEK Main Ring”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1742-1745.
- U. Ratzinger, N. Gaertner, R. Geier, H. Morinaga, and E. Nolte, “The Upgraded Munich Linear Heavy Ion Postaccelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 367-369.
- D. Kayran and V. Litvinenko, “Merger System Optimization in BNL's High Current R&D ERL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS097, pp. 3711-3713.
- M. H. Rashid and R. K. Bhandari, “Profile of Loss Cone on Plasma Surface of the 14.4 GHz ECR Ion Source in Kolkata”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-05, pp. XX-XX.
- A. Willner et al., “High Repetition Rate Seeding of a Free-Electron Laser at DESY Hamburg”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE007, pp. 2158-2160.
- M. Kotur et al., “Photocathode Laser Pulse Shaping for Improved Emittance”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 84-86.
Back to search