Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H.-S. Kang et al., “Status of the PAL-XFEL”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 1042-1046. doi:10.18429/JACoW-LINAC2016-FR2A01
[n] S. Morales Vigo et al., “Calibration of the LHC Diamond beam loss monitors for LHC Run 3”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4641-4644. doi:10.18429/JACoW-IPAC2023-THPL085
[n] G. H. Gillespie, B. W. Hill, and G. H. Gillespie Associates Inc, “An Interactive Graphical User Interface for the Linac Beam Dynamics Code PARMILA”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-64, pp. 517-519.
[n] J. R. Roensch et al., “Investigations of the Longitudinal Phase Space at PITZ”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS103, pp. 3517-3519.
[n] B. X. Yang, J. L. Bailey, S. J. Stein, and D. R. Walters, “Design of a High-Resolution Optical Transition Radiation Imager System for the Linac Coherent Light Source Undulator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT087, pp. 4209-4211.
[n] D. C. Plostinar, R. Enparantza, and M. Larrañaga, “Modelling of the FETS MEBT Line using GPT”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC039, pp. 2094-2096.
[n] A. M. Vetter, J. L. Adamski, R. W. Kruse, and A. G. Krycuk, “High Power RF Tests of 433 MHz Single-Cell Accelerator Cavities and Associated Feed System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 183-186.
[n] C. Vaccarezza, “Status of the SPARX FEL Project”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG322, pp. XX-XX.
[n] D. J. Adams et al., “Beam Loss Control in the ISIS Accelerator Facility”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO1C02, pp. 560-564.
[n] R. Broomfield, M. Heiniger, T. Korhonen, and T. Pal, “Database Applications for Control System Hardware Management”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP530, pp. XX-XX.
[n] Z. Wang, Q. Gu, G. L. Wang, and M. H. Zhao, “Injector Physics Design at SHINE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1801-1803. doi:10.18429/JACoW-IPAC2019-TUPRB053
[n] R. T. Westervelt, W. B. Klein, and G. Luger, “Framework for a General Purpose, Intelligent Control System for Particle Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAE08, pp. 2175-2177.
[n] W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3607-3610.
[n] G. H. Gillespie, “Simulating Apertures in the Uniform Equivalent Beam Model”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 87-89. doi:10.18429/JACoW-LINAC2016-MOPRC009
[n] M. Ludwig, L. Bojtar, M. F. Fernandes, M. Gasior, L. Soby, and G. Tranquille, “CERN Antiproton Decelerator Beam Instrumentation for the ELENA Era”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3684-3686. doi:10.18429/JACoW-IPAC2014-THPME176
[n] S. Karsch, “Science and Techniques of Ultra-Fast Electron and Photon Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR3RBI02, pp. 4290-4290.
[n] E. Bondarchuk et al., “Normal Conducting QN Quadrupole for the HERA Luminosity Upgrade”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP48C, pp. 1957-1959.
[n] E. Bondarchuk et al., “Normal Conducting QM Quadrupole for the HERA Luminosity Upgrade”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP50C, pp. 1972-1974.
[n] H. J. Son, J.-W. Kim, Y. H. Park, and M. Chung, “Optical Design of the EBIS Charge Breeder System for RAON in Korea”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB30, pp. 265-267.
[n] S. Proskin and A. Kulago, “Study of Physical Processes of Acceleration of Electron Bunches with Extremal Density by Means of Stored Energy in Disk Loaded Waveguide Sections”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC017, pp. 3314-3316.
[n] M. Tomizawa, M. Aoki, and I. Itahashi, “J-PARC Accelerator Scheme for Muon to Electron Conversion Search”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC128, pp. 367-369.
[n] A. Kling, K. Balewski, and R. Bartolini, “Turn-by-turn Data Analysis for PETRA III”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA017, pp. 2514-2516.
[n] A. Apollonio et al., “Availability Studies for Linac4 and Machine Protection Requirements for Linac4 Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3807-3809. doi:10.18429/JACoW-IPAC2014-THPRI020
[n] C. H. Huang et al., “Online RadFET Reader for Beam Loss Monitoring System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1097-1099. doi:10.18429/JACoW-IPAC2015-MOPTY070
[n] V. Papash, V. Parkhomchuk, and O. Borisov, “Feasibility Study Of 8 Mev H- Cyclotron To Charge The Electron Cooling System For Hesr”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 169-171.
[n] A. Kling, “Dust Macroparticles in HERA and DORIS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS002, pp. 1486-1488.
[n] Z. C. Chen, Y. B. Leng, Y. B. Yan, and B. P. Wang, “Correlation Analysis of Beam Diagnostic Measurements in SSRF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR036, pp. 858-860.
[n] Tianjue Zhang, Yinlong Lu, Fengping Guan, Xianlu Jia, Junqing Zhong, Hongjuan Yao And Yuzheng Lin , CIAE, China, “The Study And Design Of Spiral Inflector And Central Region For Cyciae-100 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 57-59.
[n] A. S. Dhavale and K. C. Mittal, “Study of Multipacting in a Coaxial Coupler”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC012, pp. 2917-2919.
[n] H. G. Kirk et al., “Beam-power Deposition in a 4-MW Target Station for a Muon Collider or a Neutrino Factory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS054, pp. 1653-1655.
[n] S. Ghatak, A. S. Dhavale, and K. C. Mittal, “Multipacting Analysis of Superconducting RF Cavities using a Finite Element-based Code employing Leap Frog Method”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC011, pp. 2914-2916.
[n] T. Murakami, K. Noda, K. Ohtomo, Y. Sasaki, S. Shibuya, and S. Yamada, “Lattice Design of NIRS Small Ring for Heavy Ions”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP34C, pp. 547-549.
[n] S. Seko, A. Suzuki, H. Yoshioka, K. Tanaka, S. Takeda, and H. Matsumoto, “Stable Support Stands for Accelerators”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16058, pp. XX-XX.
[n] F. Su et al., “SPPC Parameter Choice and Lattice Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1400-1402. doi:10.18429/JACoW-IPAC2016-TUPMW001
[n] Sz.An , Fp.Guan, Tj.Zhang, Hd Xie, Jq.Zhong, Xl.Jia, Sm.Wei, Hj.Yao, Yj.Bi, B.Ji, Cj.Chu, Js.Xing, Lc.Wu,Yl.Lu, Zg.Li, Zh.Zhou, Gf.Pan, Zg.Yin, Sg..Hou, T.Ge, Gf.Song, Lp.Weng And F.Yang , CIAE China, “Extraction Simulation For Cyciae-100”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 69-71.
[n] Rakesh Kumar Bhandari And Bikash Sinha For Vecc Staff, “Status Of The K500 Superconducting Cyclotron Project At Kolkata”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 51-53.
[n] B. Mukherjee and J. Khachan, “Component Activation Of A High Current Radioisotope Production Medical Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 119-121.
[n] M. Sessler, “Innovative Design Of The Isocentric Proton/Carbon Ion Gantries”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 207-209.
[n] M. Pezzetti, B. Bradu, P. Gayet, and J. Vasseur, “Helium Cryoplant Off-line Commissioning and Operator Training: Two Applications of the PROCOS Simulation System at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP059, pp. 513-515.
[n] Rakesh Kumar Bhandari For Vecc Staff, “Medical Cyclotron Facility At Kolkata”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 87-92.
[n] M. Fujieda et al., “A New Type of RF Cavity For High Intensity Proton Synchrotron Using High Permeability Magnetic Alloy”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOB03B, pp. 299-301.
[n] G. H. Rees, “Non-Isochronous & Isochronous, Non-Scaling FFAG Design”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 189-192.
[n] X. Jia and T. Zhang, “Study On Space Charge Effect In The Spiral Inflector”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 72-74.
[n] W. L. Zhan et al., “Commissioning Of Csr In Lanzhou”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 110-115.
[n] T. Katayama, C. Dimopoulou, B. Franzke, T. Kikuchi, D. M?Âhl, and M. Steck, “Simulation Study of Beam Accumulation with Moving Barrier Buckets and Electron Cooling”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper FRM2C05, pp. 238-242.
[n] V. S. Kashikhin et al., “Four-Coil Superconducting Helical Solenoid Model for Muon Beam Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD013, pp. 2431-2433.
For LaTeX
Use Complete Form
For BibTeX
References
- H.-S. Kang et al., “Status of the PAL-XFEL”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 1042-1046.
- S. Morales Vigo et al., “Calibration of the LHC Diamond beam loss monitors for LHC Run 3”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL085, pp. 4641-4644.
- G. H. Gillespie, B. W. Hill, and G. H. Gillespie Associates Inc, “An Interactive Graphical User Interface for the Linac Beam Dynamics Code PARMILA”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-64, pp. 517-519.
- J. R. Roensch et al., “Investigations of the Longitudinal Phase Space at PITZ”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS103, pp. 3517-3519.
- B. X. Yang, J. L. Bailey, S. J. Stein, and D. R. Walters, “Design of a High-Resolution Optical Transition Radiation Imager System for the Linac Coherent Light Source Undulator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT087, pp. 4209-4211.
- D. C. Plostinar, R. Enparantza, and M. Larrañaga, “Modelling of the FETS MEBT Line using GPT”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC039, pp. 2094-2096.
- A. M. Vetter, J. L. Adamski, R. W. Kruse, and A. G. Krycuk, “High Power RF Tests of 433 MHz Single-Cell Accelerator Cavities and Associated Feed System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 183-186.
- C. Vaccarezza, “Status of the SPARX FEL Project”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper WG322, pp. XX-XX.
- D. J. Adams et al., “Beam Loss Control in the ISIS Accelerator Facility”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO1C02, pp. 560-564.
- R. Broomfield, M. Heiniger, T. Korhonen, and T. Pal, “Database Applications for Control System Hardware Management”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP530, pp. XX-XX.
- Z. Wang, Q. Gu, G. L. Wang, and M. H. Zhao, “Injector Physics Design at SHINE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1801-1803.
- R. T. Westervelt, W. B. Klein, and G. Luger, “Framework for a General Purpose, Intelligent Control System for Particle Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAE08, pp. 2175-2177.
- W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3607-3610.
- G. H. Gillespie, “Simulating Apertures in the Uniform Equivalent Beam Model”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 87-89.
- M. Ludwig, L. Bojtar, M. F. Fernandes, M. Gasior, L. Soby, and G. Tranquille, “CERN Antiproton Decelerator Beam Instrumentation for the ELENA Era”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3684-3686.
- S. Karsch, “Science and Techniques of Ultra-Fast Electron and Photon Sources”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR3RBI02, pp. 4290-4290.
- E. Bondarchuk et al., “Normal Conducting QN Quadrupole for the HERA Luminosity Upgrade”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP48C, pp. 1957-1959.
- E. Bondarchuk et al., “Normal Conducting QM Quadrupole for the HERA Luminosity Upgrade”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP50C, pp. 1972-1974.
- H. J. Son, J.-W. Kim, Y. H. Park, and M. Chung, “Optical Design of the EBIS Charge Breeder System for RAON in Korea”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB30, pp. 265-267.
- S. Proskin and A. Kulago, “Study of Physical Processes of Acceleration of Electron Bunches with Extremal Density by Means of Stored Energy in Disk Loaded Waveguide Sections”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC017, pp. 3314-3316.
- M. Tomizawa, M. Aoki, and I. Itahashi, “J-PARC Accelerator Scheme for Muon to Electron Conversion Search”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC128, pp. 367-369.
- A. Kling, K. Balewski, and R. Bartolini, “Turn-by-turn Data Analysis for PETRA III”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA017, pp. 2514-2516.
- A. Apollonio et al., “Availability Studies for Linac4 and Machine Protection Requirements for Linac4 Commissioning”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3807-3809.
- C. H. Huang et al., “Online RadFET Reader for Beam Loss Monitoring System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1097-1099.
- V. Papash, V. Parkhomchuk, and O. Borisov, “Feasibility Study Of 8 Mev H- Cyclotron To Charge The Electron Cooling System For Hesr”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 169-171.
- A. Kling, “Dust Macroparticles in HERA and DORIS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS002, pp. 1486-1488.
- Z. C. Chen, Y. B. Leng, Y. B. Yan, and B. P. Wang, “Correlation Analysis of Beam Diagnostic Measurements in SSRF”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR036, pp. 858-860.
- Tianjue Zhang, Yinlong Lu, Fengping Guan, Xianlu Jia, Junqing Zhong, Hongjuan Yao And Yuzheng Lin , CIAE, China, “The Study And Design Of Spiral Inflector And Central Region For Cyciae-100 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 57-59.
- A. S. Dhavale and K. C. Mittal, “Study of Multipacting in a Coaxial Coupler”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC012, pp. 2917-2919.
- H. G. Kirk et al., “Beam-power Deposition in a 4-MW Target Station for a Muon Collider or a Neutrino Factory”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS054, pp. 1653-1655.
- S. Ghatak, A. S. Dhavale, and K. C. Mittal, “Multipacting Analysis of Superconducting RF Cavities using a Finite Element-based Code employing Leap Frog Method”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC011, pp. 2914-2916.
- T. Murakami, K. Noda, K. Ohtomo, Y. Sasaki, S. Shibuya, and S. Yamada, “Lattice Design of NIRS Small Ring for Heavy Ions”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP34C, pp. 547-549.
- S. Seko, A. Suzuki, H. Yoshioka, K. Tanaka, S. Takeda, and H. Matsumoto, “Stable Support Stands for Accelerators”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16058, pp. XX-XX.
- F. Su et al., “SPPC Parameter Choice and Lattice Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1400-1402.
- Sz.An , Fp.Guan, Tj.Zhang, Hd Xie, Jq.Zhong, Xl.Jia, Sm.Wei, Hj.Yao, Yj.Bi, B.Ji, Cj.Chu, Js.Xing, Lc.Wu,Yl.Lu, Zg.Li, Zh.Zhou, Gf.Pan, Zg.Yin, Sg..Hou, T.Ge, Gf.Song, Lp.Weng And F.Yang , CIAE China, “Extraction Simulation For Cyciae-100”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 69-71.
- Rakesh Kumar Bhandari And Bikash Sinha For Vecc Staff, “Status Of The K500 Superconducting Cyclotron Project At Kolkata”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 51-53.
- B. Mukherjee and J. Khachan, “Component Activation Of A High Current Radioisotope Production Medical Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 119-121.
- M. Sessler, “Innovative Design Of The Isocentric Proton/Carbon Ion Gantries”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 207-209.
- M. Pezzetti, B. Bradu, P. Gayet, and J. Vasseur, “Helium Cryoplant Off-line Commissioning and Operator Training: Two Applications of the PROCOS Simulation System at CERN”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP059, pp. 513-515.
- Rakesh Kumar Bhandari For Vecc Staff, “Medical Cyclotron Facility At Kolkata”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 87-92.
- M. Fujieda et al., “A New Type of RF Cavity For High Intensity Proton Synchrotron Using High Permeability Magnetic Alloy”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THOB03B, pp. 299-301.
- G. H. Rees, “Non-Isochronous & Isochronous, Non-Scaling FFAG Design”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 189-192.
- X. Jia and T. Zhang, “Study On Space Charge Effect In The Spiral Inflector”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 72-74.
- W. L. Zhan et al., “Commissioning Of Csr In Lanzhou”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 110-115.
- T. Katayama, C. Dimopoulou, B. Franzke, T. Kikuchi, D. M?Âhl, and M. Steck, “Simulation Study of Beam Accumulation with Moving Barrier Buckets and Electron Cooling”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper FRM2C05, pp. 238-242.
- V. S. Kashikhin et al., “Four-Coil Superconducting Helical Solenoid Model for Muon Beam Cooling”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD013, pp. 2431-2433.
Back to search