JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. E. Laxdal, B. Boussier, K. Fong, M. Laverty, A. K. Mitra, and V. Zvyagintsev, “ISAC-II QWR Cavity Characterizations and Investigations”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP36, pp. 320-322. 
[n]	H. Ohgaki, Y. Iwasaki, S. Koda, K. Kudo, T. Tomimasu, and H. Toyokawa, “Design of Control System for SAGA Synchrotron Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE029, pp. 2387-2389. 
[n]	Y. Iwasaki, T. Kaneyasu, S. Koda, and Y. Takabayashi, “Slow orbit feedback correction using extra-windings at the SAGA-LS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1035-1037. doi:10.18429/JACoW-IPAC2023-MOPM024
[n]	Y. Iwasaki, “Control System of Two Superconducting Wigglers and Compensation Magnets in The SAGA Light Source”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO022, pp. 84-86. 
[n]	Y. Iwasaki, T. Kaneyasu, S. Koda, and Y. Takabayashi, “Improvements for Simple Operation at SAGA-LS Accelerator”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL023, pp. 76-78. 
[n]	M. Abbaslou et al., “Design Considerations for a Proton Linac for a Compact Accelerator Based Neutron Source”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 878-883. doi:10.18429/JACoW-LINAC2022-FR1AA05
[n]	K. Cornelis, W. Herr, and M. Meddahi, “Proton Antiproton Collisions at a Finite Crossing Angle in the SPS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 153-156. 
[n]	L. Sito et al., “Impedance and thermal studies of the CERN SPS wire scanners and mitigation of wire heating”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2260-2263. doi:10.18429/JACoW-IPAC2024-WEPG29
[n]	R. Assmann and K. Cornelis, “The Beam-Beam Interaction in the Presence of Strong Radiation Damping”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B01, pp. 1187-1189. 
[n]	G. Iadarola et al., “Detailed Studies of Beam Induced Scrubbing in the CERN-SPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3908-3910. doi:10.18429/JACoW-IPAC2015-THPF091
[n]	Y. Iwasaki, “Beam Loss Reduction During Energy Ramp-Up at the SAGA-LS”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2583-2585. doi:10.18429/JACoW-IPAC2022-THPOPT010
[n]	P. Collier, K. Cornelis, A. Hofmann, S. Myers, and H. Schmickler, “Synchro-Betatron Resonances in LEP”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP020G, pp. 418-420. 
[n]	B. Parker et al., “Superconducting Corrector IR Magnet Production for SuperKEKB”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA07, pp. 1241-1243. 
[n]	H. Bartosik et al., “Beam Dynamics Observations of the 2015 High Intensity Scrubbing Runs at the Cern Sps”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 648-651. doi:10.18429/JACoW-IPAC2016-MOPOR022
[n]	V. L. Uvarov, N. P. Dikiy, and A. N. Dovbnya, “Electron Accelerator Based Soft Technology for Medical Imaging Isotopes Production”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI098, pp. 2760-2762. 
[n]	H. Ohgaki et al., “PC-LabView Based Control System in SAGA-LS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT076, pp. 3976-3978. 
[n]	M. Formela et al., “Hydrodynamic simulations of an argon-filled tapered plasma lens for optical matching at the ILC E+ source”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC77, unpublished. 
[n]	K. Fong, S. Fang, and M. Laverty, “RF Control System for ISAC II Superconducting Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO001, pp. 2226-2228. 
[n]	K. Cornelis, “Resonant Behaviour of Head Tail Modes”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA47, pp. 1189-1191. 
[n]	K. Futatsukawa, Z. Fang, Y. Fukui, Y. Sato, and S. Shinozaki, “Improvement of the Chopper System for rf Deflector at the J-PARC Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2816-2818. doi:10.18429/JACoW-IPAC2018-WEPML051
[n]	K. Fong, S. Fang, and M. Laverty, “RF Control System Upgrade at TRIUMF”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1842-1845. 
[n]	B. Blomberg, A. Yacout, P. Mouche, B. Mustapha, and J. Nolen, “High-rate radiation damage studies of materials with heavy ion beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4236-4239. doi:10.18429/JACoW-IPAC2023-THPA119
[n]	T. J. Bian et al., “Design study of CEPC Alternating Magnetic Field Booster”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3791-3794. doi:10.18429/JACoW-IPAC2016-THPOR011
[n]	S. Matsui et al., “Study on Ion Bunch Generation Using a Laser Plasma RF Ion Source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS017, unpublished. 
[n]	N. P. Dikiy, A. N. Dovbnya, and V. I. Uvarov, “Development of New Electron Irradiation Based Technology for Technetium-99m Production”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP13C, pp. 2389-2394. 
[n]	N. Zhang, L. W. Lai, and Y. B. Leng, “Transverse Beam Instability Observation and Investigation Using Bunch by Bunch on-Line DAQ System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 335-337. doi:10.18429/JACoW-IPAC2017-MOPAB091
[n]	A. Y. Zelinsky, P. Gladkikh, A. A. Kalamayko, I. M. Karnaukhov, A. Mytsykov, and A. A. Shcherbakov, “Modified Lattice of the Compton X-ray Source NESTOR”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC040, pp. 1087-1089. 
[n]	A. V. Bogomyagkov et al., “Research of Possibility to use Beam Polarization for Absolute Energy Calibration in High-precision Measurement of Tau Lepton Mass at VEPP-4M”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT087, pp. 737-739. 
[n]	L. R. Carver et al., “Instability Observations in the Large Hadron Collider During Run 2”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3099-3102. doi:10.18429/JACoW-IPAC2018-THPAF057
[n]	A. Zelinsky, A. Cherkashin, and P. Gladkikh, “Modernization of the laser-optical system of the X-ray generator NESTOR”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 206-208. doi:10.18429/JACoW-IPAC2023-MOPA076
[n]	H. W. Koay, M. Fukuda, H. Kanda, M. Nakao, and T. Yorita, “Conceptual Design of Central Region for High-Temperature Superconducting Skeleton Cyclotron (HTS-SC)”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 279-283. doi:10.18429/JACoW-CYCLOTRONS2019-WEC01
[n]	M. Formela, K. Fl?Âttmann, N. Hamann, G. A. Moortgat-Pick, and S. Riemann, “Application of Plasma Lenses as Optical Matching Device for Positron Sources at Linear Colliders”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1394-1396. doi:10.18429/JACoW-IPAC2021-TUPAB026
[n]	R. Kersevan, V. Baglin, and G. Bregliozzi, “Coupled Simulations of the Synchrotron Radiation and Induced Desorption Pressure Profiles for the HiLumi-LHC Triplet Area and Interaction Points”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2381-2383. doi:10.18429/JACoW-IPAC2014-WEPME049
[n]	C. Wu et al., “New event based timing system for the taiwan light source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4122-4124. doi:10.18429/JACoW-IPAC2023-THPA068
[n]	F. Voelker, G. Lambertson, and R. Rimmer, “Higher Order Mode Damping in a Pill Box Cavity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 687-690. 
[n]	F. Lemery, D. Mihalcea, P. Piot, J. Osterhoff, C. A. J. Palmer, and P. Stoltz, “Progress Toward a High-Transformer-Ratio Dielectric Wakefield Experiment at FLASH”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEEPPB001, pp. 2166-2168. 
[n]	S. A. Nikitin and I. B. Nikolaev, “Dependence of the Electron Beam Polarization Effect in the Intra-beam Scattering Rate on the Vertical Beam Emittance”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH075, pp. 1184-1186. 
[n]	K. S. B. Li et al., “Electron Cloud Observations during LHC Operation with 25 ns Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1458-1461. doi:10.18429/JACoW-IPAC2016-TUPMW017
[n]	S. Seko, A. Suzuki, H. Yoshioka, K. Tanaka, S. Takeda, and H. Matsumoto, “Stable Support Stands for Accelerators”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16058, pp. XX-XX. 
[n]	T. Tomimasu et al., “Commissioning of SAGA Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE078, pp. 4021-4023. 
[n]	M. Pezzetti, C. F. Fluder, and R. Orlandi, “CERN Neutrino Cryogenic Control System Technology: From the WA105 Test Facility to the NP04 and NP02 Platforms”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1210. doi:10.18429/JACoW-ICALEPCS2019-WEPHA049
[n]	X. Wu et al., “Recent Progress in R&D for Ionetix Ion-12SC Superconducting Cyclotron for Production of Medical Isotopes”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3568-3570. doi:10.18429/JACoW-IPAC2019-THPMP052
[n]	N. Wunderer et al., “Design and testing of the VSR blade tuner and actuators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4412-4415. doi:10.18429/JACoW-IPAC2023-THPA191
[n]	S. Li et al., “Adaptive Feedforward Control Design Based on Simulink for the J-PARC LINAC LLRF System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2187-2189. doi:10.18429/JACoW-IPAC2018-WEPAL017
[n]	C. Carli et al., “LEIR Commissioning”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEOBPA02, pp. 1876-1878. 
[n]	N. I. Ayzatskiy et al., “Comparison Of Cu-67 Production At Cyclotron And Electron Accelerator”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 243-245. 
[n]	M. Koratzinos et al., “The FCC-ee Study: Progress and Challenges”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2165-2168. doi:10.18429/JACoW-IPAC2015-TUPTY060

For LaTeX

Use Complete Form

For BibTeX

References

Back to search