Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. IMAMURA, A. Kagamihata, Y. Kida, T. Seike, and T. Tanaka, “Development of an attractive force measurement system for In-Vacuum Undulator for SPring-8-II”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7703, unpublished.
[n] H. Chang et al., “Status of the INR Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABC-03, pp. 63-67.
[n] M. Sakano et al., “Fabrication Techniques and RF Properties of Niobium Thin Wall Cavities”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2402-2405.
[n] P. Gouard and J.-M. Lekston, “Analysis of 3D Helical Wiggler Radiation From Electron Trajectory Using Lienard-Wiechert Fields”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP06F, pp. 664-666.
[n] A. V. Shemchuk et al., “Serial Magnetic Measurements for the NICA Quadruple Magnets of the NICA Booster Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3649-3652. doi:10.18429/JACoW-IPAC2018-THPAL014
[n] H. Ikeda, H. Hirabayashi, S. Kurokawa, and M. Takasaki, “Control System of Beam Line Magnets in KEK”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2356-2359.
[n] W. H?Âfle et al., “First Operation for Stochastic Cooling of P-Bars in the CERN AD Using Optical Delay Notch Filter and Plans 2021 Operation”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 6-10. doi:10.18429/JACoW-COOL2019-MOY01
[n] T. Shintake, “TM0,1.5,0 Mode Cavity for Longitudinal Bunch Feedback Kicker”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ04, pp. 2669-2671.
[n] M. M. Shandov et al., “First Serial Magnetic Measurements of the NICA Collider Twin-Aperture Dipoles”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3645-3648. doi:10.18429/JACoW-IPAC2018-THPAL013
[n] L. Perrot et al., “Update of the beam lines conception of the SPIRAL2-DESIR Project at GANIL Caen France”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4063, unpublished.
[n] Y. Yang, Z. Cao, C. Chen, G. Feng, M. Xia, and Z. Zhao, “Design studies of a high-power infrared–terahertz FEL facility”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2638, unpublished.
[n] K. Ziegler, E. Martin, and R. Cohen, “Design Studies for an Ultra-thin Septum Extraction Channel for the Modified NEVIS Synchrocyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69C07, pp. XX-XX.
[n] L. Zwalinski et al., “Progress Towards the Commissioning and Installation of the 2PACL CO₂ Cooling Control Systems for Phase II Upgrade of the ATLAS and CMS Experiments”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 802-806. doi:10.18429/JACoW-ICALEPCS2023-TUPDP104
For LaTeX
Use Complete Form
For BibTeX
References
- K. IMAMURA, A. Kagamihata, Y. Kida, T. Seike, and T. Tanaka, “Development of an attractive force measurement system for In-Vacuum Undulator for SPring-8-II”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7703, this conference.
- H. Chang et al., “Status of the INR Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABC-03, pp. 63-67.
- M. Sakano et al., “Fabrication Techniques and RF Properties of Niobium Thin Wall Cavities”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2402-2405.
- P. Gouard and J.-M. Lekston, “Analysis of 3D Helical Wiggler Radiation From Electron Trajectory Using Lienard-Wiechert Fields”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP06F, pp. 664-666.
- A. V. Shemchuk et al., “Serial Magnetic Measurements for the NICA Quadruple Magnets of the NICA Booster Synchrotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3649-3652.
- H. Ikeda, H. Hirabayashi, S. Kurokawa, and M. Takasaki, “Control System of Beam Line Magnets in KEK”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2356-2359.
- W. H?Âfle et al., “First Operation for Stochastic Cooling of P-Bars in the CERN AD Using Optical Delay Notch Filter and Plans 2021 Operation”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 6-10.
- T. Shintake, “TM0,1.5,0 Mode Cavity for Longitudinal Bunch Feedback Kicker”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ04, pp. 2669-2671.
- M. M. Shandov et al., “First Serial Magnetic Measurements of the NICA Collider Twin-Aperture Dipoles”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3645-3648.
- L. Perrot et al., “Update of the beam lines conception of the SPIRAL2-DESIR Project at GANIL Caen France”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4063, this conference.
- Y. Yang, Z. Cao, C. Chen, G. Feng, M. Xia, and Z. Zhao, “Design studies of a high-power infrared–terahertz FEL facility”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2638, this conference.
- K. Ziegler, E. Martin, and R. Cohen, “Design Studies for an Ultra-thin Septum Extraction Channel for the Modified NEVIS Synchrocyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69C07, pp. XX-XX.
- L. Zwalinski et al., “Progress Towards the Commissioning and Installation of the 2PACL CO₂ Cooling Control Systems for Phase II Upgrade of the ATLAS and CMS Experiments”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP104, pp. 802-806.
Back to search