Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Angelici, F. Frezza, A. Mostacci, L. Palumbo, and B. Spataro, “Wake Fields due to Periodic Roughness in a Circular Pipe”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B10, pp. 1438-1440.
[n] R. M. Seraphim et al., “Installation and Commissioning of the Sirius Vacuum System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3455-3458. doi:10.18429/JACoW-IPAC2021-WEPAB333
[n] W. P. Leemans, P. Volfbeyn, L. Archambault, P. Catravas, S. Dimaggio, and E. Esarey, “Channel Guiding for Laser Wakefield Accelerators”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEBL2, pp. 325-329.
[n] S. A. Melnikov, I. N. Meshkov, and K. G. Osipov, “Minimization of NICA Collider Impedance”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2043-2045. doi:10.18429/JACoW-IPAC2021-TUPAB252
[n] I. L. Azhgirey et al., “Benchmarking of the Radiation Environment Simulations for CMS Experiment at LHC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2235-2238. doi:10.18429/JACoW-IPAC2021-TUPAB317
[n] I. C. Sheng, “A Note of Thermal Analysis in Synchrotron Radiation Accelerator Engineering”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 264-266. doi:10.18429/JACoW-MEDSI2018-WEPH28
[n] T. Wehrli, M. B?Âge, J. Krempasky, and E. D. van Garderen, “Properties of X-ray Beam Position Monitors at the Swiss Light Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC139, pp. 3312-3314.
[n] A. Gilmour, W. R. Araujo, and J. M. Polli, “Thermo-Mechanical Aspects of the MOBIPIX, a Compact X-Ray Imaging System with Embedded GPU”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 223-226. doi:10.18429/JACoW-MEDSI2018-WEPH12
[n] S. M. Hong et al., “Development of the Ion Chamber and Transresistance Amplifier for Intensity of Synchrotron Radiation”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99905, pp. XX-XX.
[n] S. Adam and M. Humbel, “Integration of Compute-Bound Tasks in the SIN Control System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-04, pp. 418-421.
[n] J. H. Kelly, “Experimental Modal Analysis Vibration Measurement to Inform Engineering Design”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 235-237. doi:10.18429/JACoW-MEDSI2018-WEPH15
[n] M. Böge, J. Chrin, M. Muñoz, and A. Streun, “Commissioning of the SLS Using CORBA Based Beam Dynamics Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB012, pp. 292-294.
[n] J. M. Nogiec, E. Desavouret, M. Lamm, D. F. Orris, S. Sharonov, and J. Sim, “Architecture of a Software Quench Management System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH097, pp. 3460-3462.
[n] D. J. Bromberek, W. G. Jansma, T. L. Smith, and G. J. Waldschmidt, “Mechanical Straightening of the 3-m Accelerating Structures at the Advanced Photon Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1051-1053. doi:10.18429/JACoW-NAPAC2016-WEPOB70
[n] K. Furukawa, “Towards Reliable Acceleration of High-Energy and High-Intensity Electron Beams”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUE09, pp. 630-632.
[n] W. Ebeling et al., “Superconducting Cavities at DESY”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-4, pp. XX-XX.
[n] F. E. Johnson, R. A. Maraschin, C. Meyer-Boricke, J. Reich, and C. T. Rockhold, “Iterative Procedure for Fringe Field Shaping with Laminated Pole Caps”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 890-892.
[n] F. Naito et al., “Development of the 50-MeV DTL for the JAERI/KEK Joint Project”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUD08, pp. 563-565.
[n] A. Mizuno, H. Dewa, H. Hanaki, T. Taniuchi, H. Tomizawa, and M. Uesaka, “Emittance Measurement with Upgraded RF Gun System at SPring-8”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE056, pp. 3348-3350.
[n] M. Gulley, B. Carlsten, N. A. Moody, and S. Russell, “Operations Overview of the Los Alamos Neutron Science Center (LANSCE)”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPM049, unpublished.
[n] G. Kreps, D. Proch, and J. Sekutowicz, “Half-cell and Dumb-bell Frequency Testing for the Correction of the TESLA Cavity Length”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP031, pp. 499-504.
[n] M. Chanudet, “On Some RF Three-dimensional Simulations of Magnetically Coupled Cells”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1268-1271.
[n] I. L. Azhgirey, D. Bozzato, A. E. Dabrowski, I. A. Kurochkin, S. Mallows, and A. D. Riabchikova, “Physical Design of the Radiation Shielding for the CMS Experiment at LHC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2246-2248. doi:10.18429/JACoW-IPAC2021-TUPAB320
[n] Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX.
[n] M. J. P. Adam and N. Appathurai, “Evaluation of Anisotropic Simulations & Redesign of the BXDS High Energy Monochromator Bent Laue Diffraction Crystal Holders”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 199-201. doi:10.18429/JACoW-MEDSI2018-WEPH01
[n] I. V. Gorelyshev, V. V. Filimonov, K. G. Osipov, and A. O. Sidorin, “NICA Stochastic Cooling: Conceptual Design Project and Status”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper TUB06, unpublished.
[n] A. G. Alekseev et al., “Basic Design Parameters of a Small Size Isochronous Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F03, pp. XX-XX.
[n] R. Servranckx and J. L. LaClare, “Concept and General Design of an Electron Pulse Stretcher”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 204-207.
[n] R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX.
[n] D. Eartly, R. Currier, J. Lindberg, S. Sobczynski, and W. Strickland, “New, Semi-Remote Handling Target Stations in the Fermilab Experimental Areas”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3072-3074.
[n] K. Moriyama and T. Nakatani, “A Data Management Infrastructure for Neutron Scattering Experiments in J-PARC/MLF”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 834-837. doi:10.18429/JACoW-ICALEPCS2015-WEPGF060
[n] T. K. Khoe and J. J. Livingood, “A Decade of Progress in Cyclotrons - - Frequency Modulated and Isochronous”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 23-29.
[n] A. Schempp, H. Liebermann, B. Hofmann, and L. Brendel, “Tuner Design for High Power 4-Rod-RFQs”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP10, pp. 617-619.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Angelici, F. Frezza, A. Mostacci, L. Palumbo, and B. Spataro, “Wake Fields due to Periodic Roughness in a Circular Pipe”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1B10, pp. 1438-1440.
- R. M. Seraphim et al., “Installation and Commissioning of the Sirius Vacuum System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3455-3458.
- W. P. Leemans, P. Volfbeyn, L. Archambault, P. Catravas, S. Dimaggio, and E. Esarey, “Channel Guiding for Laser Wakefield Accelerators”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEBL2, pp. 325-329.
- S. A. Melnikov, I. N. Meshkov, and K. G. Osipov, “Minimization of NICA Collider Impedance”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2043-2045.
- I. L. Azhgirey et al., “Benchmarking of the Radiation Environment Simulations for CMS Experiment at LHC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2235-2238.
- I. C. Sheng, “A Note of Thermal Analysis in Synchrotron Radiation Accelerator Engineering”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 264-266.
- T. Wehrli, M. B?Âge, J. Krempasky, and E. D. van Garderen, “Properties of X-ray Beam Position Monitors at the Swiss Light Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC139, pp. 3312-3314.
- A. Gilmour, W. R. Araujo, and J. M. Polli, “Thermo-Mechanical Aspects of the MOBIPIX, a Compact X-Ray Imaging System with Embedded GPU”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 223-226.
- S. M. Hong et al., “Development of the Ion Chamber and Transresistance Amplifier for Intensity of Synchrotron Radiation”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99905, pp. XX-XX.
- S. Adam and M. Humbel, “Integration of Compute-Bound Tasks in the SIN Control System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-04, pp. 418-421.
- J. H. Kelly, “Experimental Modal Analysis Vibration Measurement to Inform Engineering Design”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 235-237.
- M. Böge, J. Chrin, M. Muñoz, and A. Streun, “Commissioning of the SLS Using CORBA Based Beam Dynamics Applications”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPB012, pp. 292-294.
- J. M. Nogiec, E. Desavouret, M. Lamm, D. F. Orris, S. Sharonov, and J. Sim, “Architecture of a Software Quench Management System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH097, pp. 3460-3462.
- D. J. Bromberek, W. G. Jansma, T. L. Smith, and G. J. Waldschmidt, “Mechanical Straightening of the 3-m Accelerating Structures at the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1051-1053.
- K. Furukawa, “Towards Reliable Acceleration of High-Energy and High-Intensity Electron Beams”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUE09, pp. 630-632.
- W. Ebeling et al., “Superconducting Cavities at DESY”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-4, pp. XX-XX.
- F. E. Johnson, R. A. Maraschin, C. Meyer-Boricke, J. Reich, and C. T. Rockhold, “Iterative Procedure for Fringe Field Shaping with Laminated Pole Caps”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 890-892.
- F. Naito et al., “Development of the 50-MeV DTL for the JAERI/KEK Joint Project”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUD08, pp. 563-565.
- A. Mizuno, H. Dewa, H. Hanaki, T. Taniuchi, H. Tomizawa, and M. Uesaka, “Emittance Measurement with Upgraded RF Gun System at SPring-8”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE056, pp. 3348-3350.
- M. Gulley, B. Carlsten, N. A. Moody, and S. Russell, “Operations Overview of the Los Alamos Neutron Science Center (LANSCE)”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM049, unpublished.
- G. Kreps, D. Proch, and J. Sekutowicz, “Half-cell and Dumb-bell Frequency Testing for the Correction of the TESLA Cavity Length”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP031, pp. 499-504.
- M. Chanudet, “On Some RF Three-dimensional Simulations of Magnetically Coupled Cells”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1268-1271.
- I. L. Azhgirey, D. Bozzato, A. E. Dabrowski, I. A. Kurochkin, S. Mallows, and A. D. Riabchikova, “Physical Design of the Radiation Shielding for the CMS Experiment at LHC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2246-2248.
- Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX.
- M. J. P. Adam and N. Appathurai, “Evaluation of Anisotropic Simulations & Redesign of the BXDS High Energy Monochromator Bent Laue Diffraction Crystal Holders”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 199-201.
- I. V. Gorelyshev, V. V. Filimonov, K. G. Osipov, and A. O. Sidorin, “NICA Stochastic Cooling: Conceptual Design Project and Status”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper TUB06, unpublished.
- A. G. Alekseev et al., “Basic Design Parameters of a Small Size Isochronous Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F03, pp. XX-XX.
- R. Servranckx and J. L. LaClare, “Concept and General Design of an Electron Pulse Stretcher”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 204-207.
- R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX.
- D. Eartly, R. Currier, J. Lindberg, S. Sobczynski, and W. Strickland, “New, Semi-Remote Handling Target Stations in the Fermilab Experimental Areas”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3072-3074.
- K. Moriyama and T. Nakatani, “A Data Management Infrastructure for Neutron Scattering Experiments in J-PARC/MLF”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 834-837.
- T. K. Khoe and J. J. Livingood, “A Decade of Progress in Cyclotrons - - Frequency Modulated and Isochronous”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 23-29.
- A. Schempp, H. Liebermann, B. Hofmann, and L. Brendel, “Tuner Design for High Power 4-Rod-RFQs”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP10, pp. 617-619.
Back to search