JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Sulc, A. Eichler, and T. Wilksen, “A Data-Driven Anomaly Detection on SRF Cavities at the European XFEL”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1152-1155. doi:10.18429/JACoW-IPAC2022-TUPOPT062
[n]	S. V. Golubev, V. G. Zorin, G. G. Gulbekian, and V. B. Kutner, “Gyrotron Pumped ECR Source of Multi-Charged Ions Built in a Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-09, pp. 427-429. 
[n]	A. Eichler et al., “First Steps Toward an Autonomous Accelerator, a Common Project Between DESY and KIT”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2182-2185. doi:10.18429/JACoW-IPAC2021-TUPAB298
[n]	P. Nonn, A. Eichler, S. Pfeiffer, H. Schlarb, and J. H. K. Timm, “Providing Computing Power for High Level Controllers in MicroTCA-based LLRF Systems via PCI Express Extension”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4363-4365. doi:10.18429/JACoW-IPAC2021-THPAB287
[n]	Z. Zaharieva and M. Buttner, “CERN Alarms Data Management: State & Improvements”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN011, pp. 110-113. 
[n]	Z. C. Chen and Y. B. Leng, “Bunch-by-Bunch Study of the Transient State of Injection at the SSRF”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 396-398. doi:10.18429/JACoW-IBIC2015-TUPB035
[n]	A. Glazov, V. Krasnopolsky, R. Meshcherov, and V. Masalov, “Pulsed Ion Sources of Duoplasmatron Type with Cold and Hot Cathodes”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC13, pp. 1025-1026. 
[n]	G. D. Wait, M. J. Barnes, D. Fiander, C. Figley, V. Roedel, and G. Waters, “A 1 MHz Beam Chopper for the Kaon Factory”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1278-1281. 
[n]	Z. Makonnen, M. Buttner, and Z. Zaharieva, “Challenges to Providing a Successful Central Configuration Service to Support CERN's New Controls Diagnostics and Monitoring System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC024, pp. 596-599. 
[n]	C. Adolphsen et al., “Wakefield and Beam Centering Measurements of a Damped and Detuned X-Band Accelerator Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA40, pp. 3477-3479. 
[n]	S. V. Kuzikov, S. Yu. Kazakov, M. E. Plotkin, and J. L. Hirshfield, “HIGH-GRADIENT TWO-BEAM ACCELERATING STRUCTURE”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEAPH08, pp. XX-XX. 
[n]	K. Anderson, C. M. Bhat, J. Marriner, and Z. Tang, “An Antiproton Target Design for Increased Beam Intensity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1946-1949. 
[n]	R. Cassel and M. Nguyen, “Kicker Pulser Charger”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3147-3150. 
[n]	M. J. Barnes and G. D. Wait, “Design and Measurements of a Damping Ring Kicker for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAC01, pp. 846-848. 
[n]	D. Lacoste et al., “New Developements on HDB++, the High-performance Data Archiving for Tango Controls”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1190-1194. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO01
[n]	S. V. Kuzikov and M. E. Plotkin, “Multi-Mode Accelerating Structure with High Filling Factor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP068, pp. 2952-2954. 
[n]	I. Bolotin, V. Budilin, A. Glazov, V. Krasnopolsky, and V. Skuratov, “Ferromagentic Cores Made from Amorphous Material for Broad-Band Accelerating System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR19, pp. 1833-1834. 
[n]	N. Baboi, T. Hellert, L. Shi, T. Wamsat, R. M. Jones, and N. Y. Joshi, “HOM Characterization for Beam Diagnostics at the European XFEL Injector”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 616-619. doi:10.18429/JACoW-IBIC2016-WEPG03
[n]	C. Rosati and E. Laface, “New Approach in Developing Open XAL Applications”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4043-4046. doi:10.18429/JACoW-IPAC2017-THPAB137
[n]	X. Guo, K. X. Liu, Z. Ni, Q. Feng, and C. Yang, “Fabrication of Large-area MgB2 Films on Copper Substrates”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 917-919. doi:10.18429/JACoW-SRF2017-THPB078
[n]	L. G. Liu et al., “Commissioning of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC042, pp. 2079-2081. 
[n]	M. J. Barnes, D. C. Fiander, and G. D. Wait, “Mathematical Modelling of the 1 MHz Beam Chopper for the Kaon Factory”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1275-1278. 
[n]	T. Slaton, G. Mazaheri, and T. Shintake, “Development of Nanometer Resolution C-Band Radio Frequency Beam Position Monitors in the Final Focus Test Beam”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4064, pp. 911-913. 
[n]	Z. J. Wang et al., “The Beam Commissioning Plan of Injector II in C-ADS”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB026, pp. 906-908. 
[n]	I. Oya et al., “The Array Control and Data Acquisition System of the Cherenkov Telescope Array”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1047. doi:10.18429/JACoW-ICALEPCS2019-WEMPR005
[n]	H. Kawaguchi, “Trajectory Accuracy Improvement of Lorentz Group Lie Algebra Mapping for Charged Particle Motions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP2A20, pp. 1513-1515. 
[n]	F. Lin, Y. S. Derbenev, V. S. Morozov, Y. Zhang, and D. P. Barber, “Electron Polarization in the Medium-Energy Electron-Ion Collider at JLAB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC098, pp. 1386-1388. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search