Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. A. Alesini et al., “The SPARX Project : R&D Activity towards X-rays FEL Sources”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS11, pp. XX-XX.
[n] L. M. Onischenko, N. G. Shakun, and P. T. Shishlyannikov, “Beam Stretching in the JINR Phasotron by Phase Displacement”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1484-1486.
[n] V. P. Dmitrievsky, A. A. Glazov, L. M. Onischenko, S. B. Vorozhtsov, and M. B. Yuldasheva, “Electrostatic Deflector as the Head Element of the JINR Phasotron Extraction System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1266-1269.
[n] S. Schreiber et al., “Improved Operation of the TTF Photoinjector for FEL Operation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI052, pp. 1804-1806.
[n] R. Steinbr??gge et al., “PolarX-EBIT -- A Versatile Tool for X-Ray Resonant Spectroscopy”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR3WH03, unpublished.
[n] S. Wilde et al., “High Power Impulse Magnetron Sputtering of Thin Films for Superconducting RF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB040, pp. 647-650.
[n] J. Musson, T. L. Allison, and C. Hewitt, “Injection of Direct-Sequence Spread Spectrum Pilot Tones into Beamline Components as a Means of Downconverter Stabilization and Real-Time Receiver Calibration”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF005, pp. 92-96.
[n] A. A. Rylov, I. R. Gulamov, A. P. Portyanko, and B. S. Yuldashev, “A Fast Method for Producing Super-Pure Radionuclide 57Co at the Classical 1.5 meter Cyclotron of the Institute of Nuclear Physics Ac.Sc.RUz”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-07, pp. 556-558.
[n] D. C. Kiselev, R. M. Bergmann, R. Sobbia, V. Talanov, and M. Wohlmuther, “Radiation Damage of Components in the Environment of High-Power Proton Accelerators”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 24-29. doi:10.18429/JACoW-Cyclotrons2016-MOC01
[n] R. Filippini and J. A. Uythoven, “Update and Summary of the Dependability Assessment of the LHC Beam Dumping System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS140, pp. 2706-2708.
[n] A. Beuret and P. Proudlock, “Regulation of Geographically Separated Master / Slave Power Converters Without External Communication”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1194-1197.
[n] P. Pizzol et al., “Superconducting Coatings Synthetized by CVD/PECVD for SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB038, pp. 643-646.
[n] C. D. Ziomek, “Adaptive Feedforward in the LANL RF Control System”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-28, pp. 683-685.
[n] L. Tsai, T.-C. Fan, S. Y. Perng, and D.-J. Wang, “Precise Positioning of Magnetic Field Centers of Quadrupole Magnets on the Girder”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA081, pp. 749-751.
[n] I. R. Gulamov, M. N. Abdukajumov, and B. S. Yuldashev, “The Faciltities and the Isotope Production in the Institute of Nuclear Physics in Tashkent”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-17, pp. 588-589.
[n] E. M. Donegani, T. J. Grandsaert, T. J. Shea, and C. A. Thomas, “The Insertable Beam Stop in the ESS SPK Section”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 114-116. doi:10.18429/JACoW-IBIC2020-WEPP07
[n] P. Aguar Bartolome et al., “Testing of the First of Series Quadrupole Doublet Module for the SIS100 Synchrotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2409-2412. doi:10.18429/JACoW-IPAC2021-TUPAB380
[n] L. M. Onischenko and O. N. Borisov, “Beam Extraction from Electron Model by Expansion-Computer Simulation”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-17, pp. 511-513.
[n] F. Schlie?ƒmann, M. Arnold, M. Dutine, and N. Pietralla, “Determination of the Momentum Spread While Running in the ERL Mode at the S-DALINAC”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 300-303. doi:10.18429/JACoW-IBIC2019-TUPP009
[n] A. V. Sy, A. J. Kimber, and J. Musson, “Development of an Ultra Fast RF Kicker for an ERL-based Electron Cooler”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper TUYAUD04, pp. 89-92.
[n] G. Biallas, D. Douglas, J. Karn, and K. Tremblay, “Magnetic Measurement of the PI Bend Dipole Magnets for the IR-FEL at the Thomas Jefferson National Accelerator Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP147, pp. 3312-3314.
[n] J. L. Belmont, G. Bizouard, and F. Ripouteau, “Design of Injection, Extraction and Magnetic Fields in SARA”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-04, pp. 383-385.
[n] S. Wilde et al., “DC Magnetism of Niobium Thin Films”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 640-643. doi:10.18429/JACoW-SRF2017-TUPB103
[n] A. Roy et al., “High Power Microwave Generation From Coaxial Virtual Cathode Oscillator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA144, pp. 523-525.
[n] Y. Yang et al., “Charge-Exchange Factor in EBIT Spectral Analysis”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR2WH03, unpublished.
[n] L. Tsai, T.-C. Fan, C.-S. Hwang, C. J. Lin, S. Y. Perng, and D.-J. Wang, “Multiple Quadrupole Magnetic Center Alignment on the Girder”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN100, pp. 395-397.
[n] D. Shu et al., “Mechanical Design of a Diamond Crystal Hard X-Ray Self-Seeding Monochromator for PAL-XFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3782-3785. doi:10.18429/JACoW-IPAC2019-THPGW089
[n] R. Zou, Z. Dong, Z. Wang, Y. Qin, and Y. Du, “Investigation of beam generation in laser back-illumination mode using metal cathodes of varying thickness in a photocathode DC electron gun”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR88, unpublished.
[n] C. Neri, A. Coletti, M. Riva, and F. Pollastrone, “The Laser In Vessel Viewing System IWS For ITER Present Status And New Developments Of The Control Processing And Data Visualization Sytems”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_004.
[n] S. Wang et al., “Horizontal Beam-size Measurements at CESR-TA Using Synchrotron-light Interferometer”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR079, pp. 972-974.
[n] J. Fang, P. Li, P. Lu, Q. Luo, B. Sun, and X. H. Wang, “Calibration of Quadrupole Component of Beam Position Monitor at HLS LINAC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP054, pp. 4075-4077.
[n] O. B. Dzagurov and V. P. Petukhov, “Corona Triode without Anode Power Supply”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A05, pp. 791-793.
[n] C. C. Wilcox, J. C. Medland, S. J. Payne, A. Pertica, and M. A. Probert, “Optimisation of a Split Plate Position Monitor for the ISIS Proton Synchrotron”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC25, pp. 739-741.
[n] A. F. Grant and B. D. Fell, “An Effective Cooling Arrangement for an Infrared Mirror Subject to High Heat Loads at the SRS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2503-2506.
[n] A. S. Dhavale and K. C. Mittal, “Evaluation of External Q Using Kroll-Yu Method With Microwaves Studio”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA133, pp. 503-505.
For LaTeX
Use Complete Form
For BibTeX
References
- D. A. Alesini et al., “The SPARX Project : R&D Activity towards X-rays FEL Sources”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS11, pp. XX-XX.
- L. M. Onischenko, N. G. Shakun, and P. T. Shishlyannikov, “Beam Stretching in the JINR Phasotron by Phase Displacement”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1484-1486.
- V. P. Dmitrievsky, A. A. Glazov, L. M. Onischenko, S. B. Vorozhtsov, and M. B. Yuldasheva, “Electrostatic Deflector as the Head Element of the JINR Phasotron Extraction System”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1266-1269.
- S. Schreiber et al., “Improved Operation of the TTF Photoinjector for FEL Operation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI052, pp. 1804-1806.
- R. Steinbr??gge et al., “PolarX-EBIT -- A Versatile Tool for X-Ray Resonant Spectroscopy”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR3WH03, unpublished.
- S. Wilde et al., “High Power Impulse Magnetron Sputtering of Thin Films for Superconducting RF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB040, pp. 647-650.
- J. Musson, T. L. Allison, and C. Hewitt, “Injection of Direct-Sequence Spread Spectrum Pilot Tones into Beamline Components as a Means of Downconverter Stabilization and Real-Time Receiver Calibration”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF005, pp. 92-96.
- A. A. Rylov, I. R. Gulamov, A. P. Portyanko, and B. S. Yuldashev, “A Fast Method for Producing Super-Pure Radionuclide 57Co at the Classical 1.5 meter Cyclotron of the Institute of Nuclear Physics Ac.Sc.RUz”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper K-07, pp. 556-558.
- D. C. Kiselev, R. M. Bergmann, R. Sobbia, V. Talanov, and M. Wohlmuther, “Radiation Damage of Components in the Environment of High-Power Proton Accelerators”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 24-29.
- R. Filippini and J. A. Uythoven, “Update and Summary of the Dependability Assessment of the LHC Beam Dumping System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS140, pp. 2706-2708.
- A. Beuret and P. Proudlock, “Regulation of Geographically Separated Master / Slave Power Converters Without External Communication”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1194-1197.
- P. Pizzol et al., “Superconducting Coatings Synthetized by CVD/PECVD for SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB038, pp. 643-646.
- C. D. Ziomek, “Adaptive Feedforward in the LANL RF Control System”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-28, pp. 683-685.
- L. Tsai, T.-C. Fan, S. Y. Perng, and D.-J. Wang, “Precise Positioning of Magnetic Field Centers of Quadrupole Magnets on the Girder”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA081, pp. 749-751.
- I. R. Gulamov, M. N. Abdukajumov, and B. S. Yuldashev, “The Faciltities and the Isotope Production in the Institute of Nuclear Physics in Tashkent”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper K-17, pp. 588-589.
- E. M. Donegani, T. J. Grandsaert, T. J. Shea, and C. A. Thomas, “The Insertable Beam Stop in the ESS SPK Section”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 114-116.
- P. Aguar Bartolome et al., “Testing of the First of Series Quadrupole Doublet Module for the SIS100 Synchrotron”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2409-2412.
- L. M. Onischenko and O. N. Borisov, “Beam Extraction from Electron Model by Expansion-Computer Simulation”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-17, pp. 511-513.
- F. Schlie?ƒmann, M. Arnold, M. Dutine, and N. Pietralla, “Determination of the Momentum Spread While Running in the ERL Mode at the S-DALINAC”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 300-303.
- A. V. Sy, A. J. Kimber, and J. Musson, “Development of an Ultra Fast RF Kicker for an ERL-based Electron Cooler”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper TUYAUD04, pp. 89-92.
- G. Biallas, D. Douglas, J. Karn, and K. Tremblay, “Magnetic Measurement of the PI Bend Dipole Magnets for the IR-FEL at the Thomas Jefferson National Accelerator Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP147, pp. 3312-3314.
- J. L. Belmont, G. Bizouard, and F. Ripouteau, “Design of Injection, Extraction and Magnetic Fields in SARA”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-04, pp. 383-385.
- S. Wilde et al., “DC Magnetism of Niobium Thin Films”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 640-643.
- A. Roy et al., “High Power Microwave Generation From Coaxial Virtual Cathode Oscillator”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA144, pp. 523-525.
- Y. Yang et al., “Charge-Exchange Factor in EBIT Spectral Analysis”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR2WH03, unpublished.
- L. Tsai, T.-C. Fan, C.-S. Hwang, C. J. Lin, S. Y. Perng, and D.-J. Wang, “Multiple Quadrupole Magnetic Center Alignment on the Girder”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN100, pp. 395-397.
- D. Shu et al., “Mechanical Design of a Diamond Crystal Hard X-Ray Self-Seeding Monochromator for PAL-XFEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3782-3785.
- R. Zou, Z. Dong, Z. Wang, Y. Qin, and Y. Du, “Investigation of beam generation in laser back-illumination mode using metal cathodes of varying thickness in a photocathode DC electron gun”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR88, unpublished.
- C. Neri, A. Coletti, M. Riva, and F. Pollastrone, “The Laser In Vessel Viewing System IWS For ITER Present Status And New Developments Of The Control Processing And Data Visualization Sytems”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_004.
- S. Wang et al., “Horizontal Beam-size Measurements at CESR-TA Using Synchrotron-light Interferometer”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR079, pp. 972-974.
- J. Fang, P. Li, P. Lu, Q. Luo, B. Sun, and X. H. Wang, “Calibration of Quadrupole Component of Beam Position Monitor at HLS LINAC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP054, pp. 4075-4077.
- O. B. Dzagurov and V. P. Petukhov, “Corona Triode without Anode Power Supply”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3A05, pp. 791-793.
- C. C. Wilcox, J. C. Medland, S. J. Payne, A. Pertica, and M. A. Probert, “Optimisation of a Split Plate Position Monitor for the ISIS Proton Synchrotron”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC25, pp. 739-741.
- A. F. Grant and B. D. Fell, “An Effective Cooling Arrangement for an Infrared Mirror Subject to High Heat Loads at the SRS”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2503-2506.
- A. S. Dhavale and K. C. Mittal, “Evaluation of External Q Using Kroll-Yu Method With Microwaves Studio”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA133, pp. 503-505.
Back to search