JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Favourites


For Word

[n]	F. Yan et al., “Commissioning of the China-ADS Injector-I Testing Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2048-2051. doi:10.18429/JACoW-IPAC2016-WEOBA02
[n]	T. Kobayashi et al., “Development and Construction Status of New LLRF Control System for SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2444-2446. doi:10.18429/JACoW-IPAC2014-WEPME071
[n]	K. Yonehara et al., “Summary of Dense Hydrogen Gas Filled RF Cavity Tests for Muon Acceleration”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI059, pp. 1481-1483. 
[n]	R. Appleby, J. M. Garland, H. L. Owen, S. C. Tygier, and K. M. Hock, “NORMA - The Normal-Conducting, Scaling Racetrack FFAG”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2198-2201. doi:10.18429/JACoW-IPAC2014-WEPRO100
[n]	A. I. Sukhanov, A. Saini, N. Solyak, and I. S. Tropin, “Model of Dark Current in SRF Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1834-1836. doi:10.18429/JACoW-IPAC2015-TUPJE081
[n]	J.-H. Jang, H. Jin, and J. Song, “Beam Optics of 180-degree Bending Section including a Charge Stripper”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3291-3293. doi:10.18429/JACoW-IPAC2016-THPMB028
[n]	M. V. Fazio et al., “Evaluation of Performance, Reliability, and Risk for High Peak Power RF Sources from S-band through X-band for Advanced Accelerator Applications”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THOBB01, pp. 2882-2884. 
[n]	Q. Luo and B. G. Sun, “Cavity-based Multi-parameter Beam Diagnostics at HLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME040, pp. 559-561. 
[n]	L. Elementi et al., “Mu2e AC Dipole 300 kHz and 5.1 MHz Tests and Comparison of Nickel-Zinc Ferrites”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD017, pp. 3533-3535. 
[n]	T. R. Edgecock, “The EUROnu Study for Future High Power Neutrino Oscillation Facilities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1553-1555. doi:10.18429/JACoW-IPAC2014-TUPRI002
[n]	J. J. Zheng, P. Lu, T. J. Ma, B. G. Sun, Y. L. Yang, and J. Y. Zou, “A PRELIMINARY SIMULATION OF BPM SIGNAL DIODE DETECTOR FOR HLS II TUNE MEASUREMENT SYSTEM”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME042, pp. 565-567. 
[n]	L. Xiao et al., “Higher Order Modes Damping Analysis for the SPX Deflecting Cavity Cyromodule”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC086, pp. 2414-2416. 
[n]	V. P. Nagaslaev and I. L. Rakhno, “MARS Tracking Simulations for the Mu2e Slow Extracted Proton Beam”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4010-4012. doi:10.18429/JACoW-IPAC2015-THPF125
[n]	C. Chen, T. J. Barton, D. M. Field, and K. M. Lang, “Simulation Studies of Adiabatic Thermal Beams in a Periodic Solenoidal Focusing Field”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR032, pp. 3003-3005. 
[n]	N. V. Mokhov, Y. I. Alexahin, V. V. Kashikhin, S. I. Striganov, I. S. Tropin, and A. V. Zlobin, “Mitigating Radiation Impact on Superconducting Magnets of the Higgs Factory Muon Collider”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1084-1086. doi:10.18429/JACoW-IPAC2014-TUPRO030
[n]	Q. Luo et al., “New Beam Diagnostics and Related Study on HLS Photo-Injector and HLS II”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3578-3580. doi:10.18429/JACoW-IPAC2014-THPME140
[n]	J. Wang et al., “Research on Low Secondary Electron Yield Materials for Future Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3284-3286. doi:10.18429/JACoW-IPAC2016-THPMB026
[n]	J. Wang et al., “Optimization Design of Ti Cathode in Ceramic Pipe Film Coating Based on the Simulation Result of CST”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2973-2975. doi:10.18429/JACoW-IPAC2015-WEPMN022
[n]	C. Bungau et al., “GEANT4 Studies of Magnets Activation in the HEBT Line for the European Spallation Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA038, pp. 3714-3716. 
[n]	W. Schappert and Y. M. Pischalnikov, “Recent Progress at Fermilab Controlling Lorentz Force Detuning and Microphonics in Superconducting Cavities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO058, pp. 2438-2440. 
[n]	J. Wang et al., “The Effect of Magnetic Field on the Secondary Electron Yield in the Ultra-High Vacuum Environment”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3281-3283. doi:10.18429/JACoW-IPAC2016-THPMB025
[n]	R. De Maria, S. D. Fartoukh, A. V. Bogomyagkov, and M. Korostelev, “HLLHCV1.0: HL-LHC Layout and Optics Models for 150 mm Nb3Sn Triplets and Local Crab-cavities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI014, pp. 1358-1360. 
[n]	J. G. Guo, Q. Luo, and Z. R. Zhou, “Design and Calculation Error Analysis of a High Order Mode Cavity Bunch Length Monitor”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 196-198. doi:10.18429/JACoW-IPAC2016-MOPMB046
[n]	J. Y. Zou et al., “Application of Libera Brilliance Single Pass at NSRL Linac BPM System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC115, pp. 1284-1286. 
[n]	R. Appleby, A. Apyan, L. C. Deacon, and E. Gschwendtner, “CLIC Post-Collision Line Luminosity Monitoring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC027, pp. 1057-1059. 
[n]	T. A. Butler, F. G. Garcia, M. R. Kufer, H. Pfeffer, and D. Wolff, “Design of a Marx-Topology Modulator for FNAL Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3306-3308. doi:10.18429/JACoW-IPAC2015-WEPTY020
[n]	R. B. Palmer, R. C. Fernow, and D. V. Neuffer, “Six-dimensional Bunch Merging for Muon Collider Cooling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR011, pp. 1831-1833. 
[n]	F. F. Wu et al., “Preliminary Research of HLS II BLM System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 190-192. doi:10.18429/JACoW-IPAC2016-MOPMB043
[n]	V. Kashikhin, Y. Alexahin, N. V. Mokhov, and A. V. Zlobin, “High-Field Combined-Function Magnets for a 1.51.5 TeV Muon Collider Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD036, pp. 3587-3589. 
[n]	Y. H. Xu et al., “Design and Research of Secondary Electron Emission Test Equipment with Low Electron Energy”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2970-2972. doi:10.18429/JACoW-IPAC2015-WEPMN021
[n]	I. L. Rakhno, N. V. Mokhov, and K. K. Gudima, “Modeling Proton- and Light Ion-Induced Reactions at Low Energies in the MARS15 Code”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4003-4006. doi:10.18429/JACoW-IPAC2015-THPF123
[n]	C. S. Liu, Q. Luo, B. G. Sun, and Z. R. Zhou, “Development of FPGA-based Bunch-by-Bunch Beam Current Monitor”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 193-195. doi:10.18429/JACoW-IPAC2016-MOPMB045
[n]	Y. Y. Xiao, L. M. Gu, P. Lu, B. G. Sun, L. L. Tang, and J. G. Wang, “Photon Beam Position Monitor based on Position-sensitive Detector for HLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC112, pp. 1281-1283. 
[n]	M. S. Jaski et al., “Magnet Designs for the Multi-bend Achromat Lattice at the Advanced Photon Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3260-3263. doi:10.18429/JACoW-IPAC2015-WEPTY003
[n]	J. Y. Zou et al., “Calibration of Beam Position Monitors in the Injector of HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME043, pp. 568-570. 
[n]	X. Y. Liu et al., “Design and Simulation of Button Beam Position Monitor for IR-FEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 187-189. doi:10.18429/JACoW-IPAC2016-MOPMB042
[n]	I. L. Rakhno, A. I. Drozhdin, N. V. Mokhov, V. I. Sidorov, and I. S. Tropin, “Improving the Fermilab Booster Notching Efficiency, Beam Losses and Radiation Levels”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD083, pp. 562-564. 
[n]	C. Chen, R. Pakter, and F. B. Rizzato, “One-Dimensional Adiabatic Child-Langmuir Flow”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS042, pp. 694-696. 
[n]	J. Lu et al., “Preliminary Mechanical Design of Ceramic Pipe Film Coating Equipment at Hefei Light Source II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2988-2990. doi:10.18429/JACoW-IPAC2015-WEPMN028
[n]	Q. Luo, Q. K. Jia, B. G. Sun, and Z. R. Zhou, “Design of Cavity Beam Monitor at HLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC111, pp. 1278-1280. 
[n]	T. N. Khabiboulline et al., “High Gradient Tests of the Fermilab SSR1 Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC052, pp. 2330-2332. 
[n]	C. Bungau, A. Bungau, R. Cywinski, and T. R. Edgecock, “Power Upgrade Studies for the ISIS-TS1 Spallation Target”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3961-3963. doi:10.18429/JACoW-IPAC2014-THPRI082
[n]	Y. Wang et al., “Vacuum System of the Storage Ring of HLS-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2976-2977. doi:10.18429/JACoW-IPAC2015-WEPMN023

For LaTeX

Use Complete Form

For BibTeX

References

Back to search