Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P.-K. Wang, J.-C. Jan, F.-Y. Lin, and C.-C. Tsai, “R&D of 2G-HTS wiggler operated in the cryogen-free system”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB039, unpublished.
[n] A. D. Yeremian, V. A. Dolgashev, and S. G. Tantawi, “High Power S-band RF Window Optimized to Minimize Electric and Magnetic Field on the Surface”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI084, pp. 2893-2895.
[n] R. Perin, “Review of R & D Towards High-field Accelerator Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 289-294.
[n] P. Mandrillon et al., “Advances of the Feasibility Study of the European Light Ion Medical Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 767-770.
[n] Ya. V. Shashkov, N. P. Sobenin, and M. Zobov, “Comparison of High Order Modes Damping Techniques for 800 MHz Single Cell Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2558-2561. doi:10.18429/JACoW-IPAC2014-WEPRI037
[n] C. Steier, P. Emma, H. Nishimura, C. F. Papadopoulos, and F. Sannibale, “Electron Beam Collimation for the Next Generation Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP038, pp. 1695-1697.
[n] M. Maxouti et al., “Three-stage simulation for the development of an ion-acoustic dose-deposition mapping system for LhARA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4714-4717. doi:10.18429/JACoW-IPAC2023-THPL106
[n] A. Goto et al., “Construction of a New Pre-Injector System for the RILAC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-09, pp. 202-205.
[n] G. Brun et al., “A Newly Observed Effect Affects the LEP Beam Energy”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP022G, pp. 421-423.
[n] W. Coosemans, P. Poirier, and I. Wilson, “An Active Alignment Test Facility for the CERN Linear Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2070-2073.
[n] J.-Y. Raguin, J. Prochnow, and W. Wuensch, “A New Technique to Compute Long-Range Wakefields in Accelerating Structures”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI047, pp. 1661-1663.
[n] S. Redaelli and W. Coosemans, “In-Situ Vibration Measurements of the CTF2 Quadrupoles”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT028, pp. 602-604.
[n] V. A. Dolgashev, J. R. Lewandowski, D. W. Martin, S. G. Tantawi, S. P. Weathersby, and A. D. Yeremian, “Study of RF Breakdown in Normal Conducting Cryogenic Structure”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC039, pp. 3368-3370.
[n] M. Geitz, A. Kabel, G. Schmidt, and H. Weise, “Bunch Compressor II at the TESLA Test Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP110, pp. 2507-2509.
[n] M. A. Clarke-Gayther, Y.-N. Rao, and D. Reistad, “Slow-wave Electrode Structures for the ESS 2.5 MeV Fast Chopper”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO006, pp. 2133-2135.
[n] R. L. Keizer et al., “Design and Performance of a Prototype Synchronous High Tension Discharge Switch for the Separation System of the LEP ee- Collider”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1190-1193.
[n] W. Coosemans, P. Poirier, and I. Wilson, “A Micro-Movement Test Facility for CERN Linear Collider Studies”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 890-893.
[n] B. Burnham, V. N. Litvinenko, and Y. Wu, “Application of Precision Magnetic Measurements for Control of the Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA01, pp. 524-526.
[n] R. E. Taylor, “Transport Systems for High Intensity Beams”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 846-856.
[n] Y. Wu, B. Burnham, and V. N. Litvinenko, “The Duke Storage Ring Control System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA10, pp. 2214-2216.
[n] Y.-N. Rao and D. Reistad, “Monte Carlo Simulations of Thin Internal Target Scattering In CELSIUS”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper MPPE003, unpublished.
[n] S. Redaelli, R. W. Assmann, M. B?Âge, W. Coosemans, M. Dehler, and L. Rivkin, “Vibration Measurements at the Swiss Light Source (SLS)”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF011, pp. 2278-2280.
[n] D. A. G. Neet, “Beam Switchyard Instrumentation for the Stanford Two-Mile Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 957-962.
[n] R. Baartman and Y.-N. Rao, “Gap-Crossing Resonance In Cyciae-100 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 406-408.
[n] K. K. Gillies and C. Boyer, “Thirty Meter Telescope Observatory Software Architecture”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMUST03, pp. 1326-1329.
[n] M. J. Barnes, L. Ducimeti?¿re, and G. D. Wait, “Inductance Calculations and Measurements for the CERN LHC Injection Pulse Forming Network”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5B10, pp. 2355-2357.
[n] J. G. Alessi et al., “Progress on Test EBIS and the Design of an EBIS-Based RHIC Preinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPB004, pp. 363-365.
[n] P. J. Bryant, P. Galbraith, J. P. Gourber, G. Guignard, and K. Takikawa, “Measurement of the Excitation of the Coupling Resonance Qh -Qv = O”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1440-1443.
[n] R. S. Larsen and H. A. Woods, “Position Monitoring Electronics for the Stanford Linear Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 862-867.
[n] Y. Kadi et al., “Status and Future Perspectives of the HIE-ISOLDE Project at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOOBA02, pp. 34-36.
[n] I. Wilson, W. Wuensch, W. Coosemans, and C. Achard, “The CLIC 30 GHz Two-Beam Test Accelerator”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4018, pp. 88-90.
[n] S. Redaelli, R. W. Assmann, W. Coosemans, and W. Schnell, “The Effect of Cooling Water on Magnet Vibrations”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI049, pp. 485-487.
[n] M. J. Barnes and G. D. Wait, “A FET Based Mass Separator Kicker for TRIUMF ISAC Project”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5B13, pp. 2376-2378.
[n] K. Ozeki, Y. Higurashi, M. Kidera, and T. Nakagawa, “Supply of Metallic Beams from RIKEN 18-GHz ECRIS Using Low-Temperature Oven”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB22, pp. 244-246.
[n] M. C. L. Buzio et al., “Development of Upgraded Magnetic Instrumentation for CERN's Real-time Reference Field Measurement Systems”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB016, pp. 310-312.
[n] T. Hakulinen et al., “Engineering Design Management and Tools for the CERN EDMS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO025, pp. 2676-2678.
[n] T. Nakagawa, “ECR Ion Sources: A Brief History and Look into the Next Generation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE2GRI01, pp. 1861-1865.
[n] T. Pettersson et al., “The CERN EDMS : An Engineering and Equipment Data Management System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO027, pp. 2697-2699.
[n] V. N. Litvinenko, Y. Wu, B. Burnham, J.M.J. Madey, and S. H. Park, “Performance of Achromatic Lattice with Combined Function Sextupoles at Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB22, pp. 796-798.
[n] P. Niknejadi, N. Bhalla, S. Gurdasani, V. Lang, J. Prochnow, and L. Schaper, “Sustainable data transformation strategies for particle and field data in modeling free-electron lasers”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2071, unpublished.
[n] J. Ohnishi, Y. Higurashi, and T. Nakagawa, “Installation and Operation of a 28 GHz Gyrotron for the RIKEN Superconducting ECR Ion Source”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP17, pp. 71-73.
[n] R. Assmann, B. Dehning, and J. Matheson, “Use of Movable Beam Position Monitors for Beam Size Measurements”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A01, pp. 1693-1695.
[n] J. A. Uythoven et al., “Beam Commissioning of the SPS-to-LHC Transfer Line TI 2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP065, pp. 2668-2670.
[n] B. Goddard, W. Bartmann, M. Benedikt, A. Koschik, and T. Kramer, “4 GeV H- Charge Exchange Injection into the PS2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP087, pp. 3566-3568.
[n] L. Zhang, S. An, Y.-S. Cho, Y. M. Li, and Y. Z. Tang, “Control System for a PEFP FPC Baking System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP166, pp. 940-942.
[n] K. Ozeki, Y. Higurashi, T. Nakagawa, and J. Ohnishi, “Emittance Measurements for U Ion Beams Produced from RIKEN 28 GHz SC-ECRIS”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEPP08, pp. 130-132.
[n] H. G. Blosser, “Sectored Cyclotrons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 985-996.
[n] J. G. Alessi et al., “High-Performance EBIS for RHIC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRYAB02, pp. 3782-3785.
[n] C. Boyer, J. Sebag, and B. Ellerbroek, “Gemini MCAO Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAT004, pp. XX-XX.
[n] R. T. Neuenschwander, A. Ricardo, D. Rodrigues, and F. W. B. Talarico, “Laser Cutting Fabrication of Magnetic Components”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1367-1370.
[n] C. Boyer et al., “Thirty Meter Telescope Adaptive Optics Computing Challenges”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MODAULT01, pp. 36-39.
[n] H.-C. Li, W.-R. Liao, S.-H. Chang, P.-S. Chuang, F.-Z. Hsiao, and H.-H. Tsai, “Effect of filling modes on boiling heat transfer mechanisms in liquid nitrogen cooling system”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7674, unpublished.
[n] J. Vlogaert, “ACOL Dipoles”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1520-1523.
[n] M. Giovannozzi et al., “Experimental Observations from the LHC Dynamic Aperture Machine Development Study in 2012”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA046, pp. 2606-2608.
[n] Ya. V. Shashkov and A. Orlov, “Macros for Identification of Higher Order Modes Types, Their Transverse Shunt Impedance and Kick Factor”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2220-2223. doi:10.18429/JACoW-IPAC2016-WEPMB048
[n] A. Burrill, I. Ben-Zvi, D. Dowell, D. Pate, T. Rao, and Z. Segalov, “Multi-Alkali Photocathode Development at Brookhaven National Lab for Application in Superconducting Photoinjectors”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE041, pp. 2672-2674.
[n] T. Nakagawa, A. Goto, T. Kageyama, M. Kase, and Y. Yano, “Plasma Cathode Method for RIKEN ECRIS”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-16, pp. 365-368.
[n] V. fM, W. Coosemans, G. Ramseier, A. A. Sery, A. I. Sleptsov, and I. Wilson, “Seismic Vibration Studies for Future Linear Colliders”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2573-2576.
[n] A. D. Yeremian et al., “SLC Injector Simulation and Tuning for High Charge Transport”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-21, pp. 353-355.
[n] M. J. Barnes and G. D. Wait, “Comparison of Measured and Predicted Inductance per Cell for a Travelling Wave Kicker Magnet”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP118G, pp. 2588-2590.
[n] P. H. Debenham, “End Magnet Design for the NBS-LASL CW Microtron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2885-2888.
[n] L. Hermansson and Y.-N. Rao, “Intra-Beam Scattering at CELSIUS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B10, pp. 1549-1551.
[n] J. Prochnow, E. Jensen, and W. Wuensch, “Measurement of Beam Position Using Highly-Damped Accelerating Structures”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB025, pp. 2467-2469.
[n] H.-H. Tsai, F.-Z. Hsiao, W.-R. Liao, H.-C. Li, and P.-S. Chuang, “A Dual-System Approach for Upgrading the Helium Cryogenic System at the Taiwan Photon Source”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7672, unpublished.
[n] D. Birnbaum, J. Tinlot, and T. Yamanouchi, “A High Intensity, High Energy Muon Beam at the Brookhaven AGS”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 895-899.
[n] R. Assmann, B. Dehning, J. Matheson, and J. Prochnow, “Nonlinear Response of Orbit Monitors”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B10, pp. 412-414.
[n] M. Modena et al., “Final Prototypes, First Pre-Series Units and Steps Towards Series Production of the LHC Main Dipoles”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB003, pp. 186-188.
For LaTeX
Use Complete Form
For BibTeX
References
- P.-K. Wang, J.-C. Jan, F.-Y. Lin, and C.-C. Tsai, “R&D of 2G-HTS wiggler operated in the cryogen-free system”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB039, unpublished.
- A. D. Yeremian, V. A. Dolgashev, and S. G. Tantawi, “High Power S-band RF Window Optimized to Minimize Electric and Magnetic Field on the Surface”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI084, pp. 2893-2895.
- R. Perin, “Review of R & D Towards High-field Accelerator Magnets”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 289-294.
- P. Mandrillon et al., “Advances of the Feasibility Study of the European Light Ion Medical Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 767-770.
- Ya. V. Shashkov, N. P. Sobenin, and M. Zobov, “Comparison of High Order Modes Damping Techniques for 800 MHz Single Cell Superconducting Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2558-2561.
- C. Steier, P. Emma, H. Nishimura, C. F. Papadopoulos, and F. Sannibale, “Electron Beam Collimation for the Next Generation Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP038, pp. 1695-1697.
- M. Maxouti et al., “Three-stage simulation for the development of an ion-acoustic dose-deposition mapping system for LhARA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL106, pp. 4714-4717.
- A. Goto et al., “Construction of a New Pre-Injector System for the RILAC”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-09, pp. 202-205.
- G. Brun et al., “A Newly Observed Effect Affects the LEP Beam Energy”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP022G, pp. 421-423.
- W. Coosemans, P. Poirier, and I. Wilson, “An Active Alignment Test Facility for the CERN Linear Collider”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2070-2073.
- J.-Y. Raguin, J. Prochnow, and W. Wuensch, “A New Technique to Compute Long-Range Wakefields in Accelerating Structures”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI047, pp. 1661-1663.
- S. Redaelli and W. Coosemans, “In-Situ Vibration Measurements of the CTF2 Quadrupoles”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT028, pp. 602-604.
- V. A. Dolgashev, J. R. Lewandowski, D. W. Martin, S. G. Tantawi, S. P. Weathersby, and A. D. Yeremian, “Study of RF Breakdown in Normal Conducting Cryogenic Structure”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC039, pp. 3368-3370.
- M. Geitz, A. Kabel, G. Schmidt, and H. Weise, “Bunch Compressor II at the TESLA Test Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP110, pp. 2507-2509.
- M. A. Clarke-Gayther, Y.-N. Rao, and D. Reistad, “Slow-wave Electrode Structures for the ESS 2.5 MeV Fast Chopper”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO006, pp. 2133-2135.
- R. L. Keizer et al., “Design and Performance of a Prototype Synchronous High Tension Discharge Switch for the Separation System of the LEP ee- Collider”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1190-1193.
- W. Coosemans, P. Poirier, and I. Wilson, “A Micro-Movement Test Facility for CERN Linear Collider Studies”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 890-893.
- B. Burnham, V. N. Litvinenko, and Y. Wu, “Application of Precision Magnetic Measurements for Control of the Duke Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA01, pp. 524-526.
- R. E. Taylor, “Transport Systems for High Intensity Beams”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 846-856.
- Y. Wu, B. Burnham, and V. N. Litvinenko, “The Duke Storage Ring Control System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA10, pp. 2214-2216.
- Y.-N. Rao and D. Reistad, “Monte Carlo Simulations of Thin Internal Target Scattering In CELSIUS”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE003, unpublished.
- S. Redaelli, R. W. Assmann, M. B?Âge, W. Coosemans, M. Dehler, and L. Rivkin, “Vibration Measurements at the Swiss Light Source (SLS)”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF011, pp. 2278-2280.
- D. A. G. Neet, “Beam Switchyard Instrumentation for the Stanford Two-Mile Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 957-962.
- R. Baartman and Y.-N. Rao, “Gap-Crossing Resonance In Cyciae-100 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 406-408.
- K. K. Gillies and C. Boyer, “Thirty Meter Telescope Observatory Software Architecture”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHMUST03, pp. 1326-1329.
- M. J. Barnes, L. Ducimeti?¿re, and G. D. Wait, “Inductance Calculations and Measurements for the CERN LHC Injection Pulse Forming Network”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5B10, pp. 2355-2357.
- J. G. Alessi et al., “Progress on Test EBIS and the Design of an EBIS-Based RHIC Preinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPB004, pp. 363-365.
- P. J. Bryant, P. Galbraith, J. P. Gourber, G. Guignard, and K. Takikawa, “Measurement of the Excitation of the Coupling Resonance Qh -Qv = O”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1440-1443.
- R. S. Larsen and H. A. Woods, “Position Monitoring Electronics for the Stanford Linear Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 862-867.
- Y. Kadi et al., “Status and Future Perspectives of the HIE-ISOLDE Project at CERN”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOOBA02, pp. 34-36.
- I. Wilson, W. Wuensch, W. Coosemans, and C. Achard, “The CLIC 30 GHz Two-Beam Test Accelerator”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4018, pp. 88-90.
- S. Redaelli, R. W. Assmann, W. Coosemans, and W. Schnell, “The Effect of Cooling Water on Magnet Vibrations”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI049, pp. 485-487.
- M. J. Barnes and G. D. Wait, “A FET Based Mass Separator Kicker for TRIUMF ISAC Project”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5B13, pp. 2376-2378.
- K. Ozeki, Y. Higurashi, M. Kidera, and T. Nakagawa, “Supply of Metallic Beams from RIKEN 18-GHz ECRIS Using Low-Temperature Oven”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB22, pp. 244-246.
- M. C. L. Buzio et al., “Development of Upgraded Magnetic Instrumentation for CERN's Real-time Reference Field Measurement Systems”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB016, pp. 310-312.
- T. Hakulinen et al., “Engineering Design Management and Tools for the CERN EDMS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO025, pp. 2676-2678.
- T. Nakagawa, “ECR Ion Sources: A Brief History and Look into the Next Generation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE2GRI01, pp. 1861-1865.
- T. Pettersson et al., “The CERN EDMS : An Engineering and Equipment Data Management System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO027, pp. 2697-2699.
- V. N. Litvinenko, Y. Wu, B. Burnham, J.M.J. Madey, and S. H. Park, “Performance of Achromatic Lattice with Combined Function Sextupoles at Duke Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAB22, pp. 796-798.
- P. Niknejadi, N. Bhalla, S. Gurdasani, V. Lang, J. Prochnow, and L. Schaper, “Sustainable data transformation strategies for particle and field data in modeling free-electron lasers”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2071, this conference.
- J. Ohnishi, Y. Higurashi, and T. Nakagawa, “Installation and Operation of a 28 GHz Gyrotron for the RIKEN Superconducting ECR Ion Source”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUPP17, pp. 71-73.
- R. Assmann, B. Dehning, and J. Matheson, “Use of Movable Beam Position Monitors for Beam Size Measurements”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A01, pp. 1693-1695.
- J. A. Uythoven et al., “Beam Commissioning of the SPS-to-LHC Transfer Line TI 2”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP065, pp. 2668-2670.
- B. Goddard, W. Bartmann, M. Benedikt, A. Koschik, and T. Kramer, “4 GeV H- Charge Exchange Injection into the PS2”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP087, pp. 3566-3568.
- L. Zhang, S. An, Y.-S. Cho, Y. M. Li, and Y. Z. Tang, “Control System for a PEFP FPC Baking System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP166, pp. 940-942.
- K. Ozeki, Y. Higurashi, T. Nakagawa, and J. Ohnishi, “Emittance Measurements for U Ion Beams Produced from RIKEN 28 GHz SC-ECRIS”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper WEPP08, pp. 130-132.
- H. G. Blosser, “Sectored Cyclotrons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 985-996.
- J. G. Alessi et al., “High-Performance EBIS for RHIC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRYAB02, pp. 3782-3785.
- C. Boyer, J. Sebag, and B. Ellerbroek, “Gemini MCAO Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAT004, pp. XX-XX.
- R. T. Neuenschwander, A. Ricardo, D. Rodrigues, and F. W. B. Talarico, “Laser Cutting Fabrication of Magnetic Components”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1367-1370.
- C. Boyer et al., “Thirty Meter Telescope Adaptive Optics Computing Challenges”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MODAULT01, pp. 36-39.
- H.-C. Li, W.-R. Liao, S.-H. Chang, P.-S. Chuang, F.-Z. Hsiao, and H.-H. Tsai, “Effect of filling modes on boiling heat transfer mechanisms in liquid nitrogen cooling system”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7674, this conference.
- J. Vlogaert, “ACOL Dipoles”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1520-1523.
- M. Giovannozzi et al., “Experimental Observations from the LHC Dynamic Aperture Machine Development Study in 2012”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA046, pp. 2606-2608.
- Ya. V. Shashkov and A. Orlov, “Macros for Identification of Higher Order Modes Types, Their Transverse Shunt Impedance and Kick Factor”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2220-2223.
- A. Burrill, I. Ben-Zvi, D. Dowell, D. Pate, T. Rao, and Z. Segalov, “Multi-Alkali Photocathode Development at Brookhaven National Lab for Application in Superconducting Photoinjectors”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE041, pp. 2672-2674.
- T. Nakagawa, A. Goto, T. Kageyama, M. Kase, and Y. Yano, “Plasma Cathode Method for RIKEN ECRIS”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VIII-16, pp. 365-368.
- V. fM, W. Coosemans, G. Ramseier, A. A. Sery, A. I. Sleptsov, and I. Wilson, “Seismic Vibration Studies for Future Linear Colliders”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2573-2576.
- A. D. Yeremian et al., “SLC Injector Simulation and Tuning for High Charge Transport”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-21, pp. 353-355.
- M. J. Barnes and G. D. Wait, “Comparison of Measured and Predicted Inductance per Cell for a Travelling Wave Kicker Magnet”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP118G, pp. 2588-2590.
- P. H. Debenham, “End Magnet Design for the NBS-LASL CW Microtron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2885-2888.
- L. Hermansson and Y.-N. Rao, “Intra-Beam Scattering at CELSIUS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B10, pp. 1549-1551.
- J. Prochnow, E. Jensen, and W. Wuensch, “Measurement of Beam Position Using Highly-Damped Accelerating Structures”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB025, pp. 2467-2469.
- H.-H. Tsai, F.-Z. Hsiao, W.-R. Liao, H.-C. Li, and P.-S. Chuang, “A Dual-System Approach for Upgrading the Helium Cryogenic System at the Taiwan Photon Source”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7672, this conference.
- D. Birnbaum, J. Tinlot, and T. Yamanouchi, “A High Intensity, High Energy Muon Beam at the Brookhaven AGS”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 895-899.
- R. Assmann, B. Dehning, J. Matheson, and J. Prochnow, “Nonlinear Response of Orbit Monitors”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B10, pp. 412-414.
- M. Modena et al., “Final Prototypes, First Pre-Series Units and Steps Towards Series Production of the LHC Main Dipoles”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAB003, pp. 186-188.
Back to search