Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Celona, G. Castro, S. Gammino, D. Mascali, and G. Ciavola, “ECRIS Latest Developments”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper WEB05, pp. 173-173.
[n] W. A. van Kampen and J. Liedorp, “Precession Injection in the Delft Isochronous Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-09, pp. 254-259.
[n] A. Vetter and R. Friedman, “Measurement of Field Asymmetry in Accelerating Cavities with Waveguide Couplers”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-09, pp. 58-60.
[n] M. Serio et al., “Multibunch Instabilities and Cures”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THX03A, pp. 148-152.
[n] P. Van Vaerenbergh et al., “Stainless Steel Vacuum Chambers for the EBS Storage Ring”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 118-120. doi:10.18429/JACoW-MEDSI2018-TUPH35
[n] R. N. Xu, C. L. Guo, D. M. Li, R. Li, S. Tan, and W. F. Wu, “Digital Power Supply Controller Development Based on FPGA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA019, pp. 702-704.
[n] G. Gulbekian, I. Ivanenko, J. Franko, and J. Keniz, “DC-72 CYCLOTRON MAGNETIC FIELD FORMATION”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO12, pp. 147-49.
[n] C. S. Mishra, “Progress in Cryomodules & Cavities in India”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIAKI06, pp. 2683-2683.
[n] M. Antonelli et al., “Fast Beam Diagnostics for Third-Generation Synchrotrons by Means of Novel Diamond-based Photon BPMs”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3541-3543. doi:10.18429/JACoW-IPAC2014-THPME128
[n] V. J. Kovarik, R. F. Lankshear, and Th. Sluyters, “The Preinjector of the BNL 200 MeV Linear Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 87-90.
[n] M. Doleans et al., “Optics Improvements Of The K500 Axial Injection Line”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 319-324.
[n] G. Wang et al., “Radiation Safety Interlock System for DCLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA026, pp. 3198-3200.
[n] P. Balleyguier, “External Q Studies for APT SC-Cavity Couplers”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4037, pp. 133-135.
[n] C. D. Moore, R. Coleman, G. Goderre, and M. J. Yang, “Tevatron Extraction Modelling”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1498-1501.
[n] R. Cohen, E. Baron, and J. Rainwater, “Nevis Synchrocyclotron Improvement Program”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 764-767.
[n] R. MacGill and R. Yourd, “Mechanical Design of a Heavy Ion RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3004-3007.
[n] A. Galimberti and C. Scafuri, “A Preliminary Study on High Precision Photon Beam Position Monitor Design for Local Feedback Systems”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP47G, pp. 1506-1508.
[n] T. Oshima et al., “All-Solid-State Picosecond Laser System for Photo Cathode RF-Gun and X-Ray Generation at Waseda University”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH135, pp. 2400-2402.
[n] C. Ronsivalle, L. Picardi, A. Vignati, A. Tata, and M. Benassi, “Accelerators Development for IntraOperative Radiation Therapy”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH022, pp. 2494-2496.
[n] C. K. Sinclair, R. Klein, J. J. Murray, and M. Rabine, “A Polarized Photon Beam for the SLAC 82-Inch Hydrogen Bubble Chamber”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1065-1069.
[n] P. Michelini and C. Scafuri, “A New Alarm System Processor for ELETTRA”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP095L, pp. 1821-1823.
[n] M. Jablonka et al., “Beam Performances of MACSE, the Saclay Superconducting Test Accelerator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 713-716.
[n] N. Kuklev, Y. K. Kim, S. Nagaitsev, A. L. Romanov, and A. Valishev, “IOTA Run 2 Beam Dynamics Studies in Nonlinear Integrable Systems”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1964-1967. doi:10.18429/JACoW-IPAC2021-TUPAB228
[n] T. Adachi, H. Someya, and F. Zhang, “Possibility of Waveform Manipulation of the Magnet Current in the Resonant Network”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A05, pp. 2193-2195.
[n] E. J. Siskind, A. E. Gromme, and M. J. Browne, “Front End Camac Controller for SLAC Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP022, pp. XX-XX.
[n] A. Yamashita, “Distributed Database in SPring-8”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP531, pp. XX-XX.
[n] G. Muelhaupt, G. Schmidt, and U. Weinrich, “First Results of Beam Storing in the ESRF Booster Synchrotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP037G, pp. 635-637.
[n] T. Powers et al., “Commissioning and Operational Experience with an Intermediate Upgrade Cryomodule for the CEBAF 12 GeV Upgrade”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP44, pp. 563-563.
For LaTeX
Use Complete Form
For BibTeX
References
- L. Celona, G. Castro, S. Gammino, D. Mascali, and G. Ciavola, “ECRIS Latest Developments”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper WEB05, pp. 173-173.
- W. A. van Kampen and J. Liedorp, “Precession Injection in the Delft Isochronous Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-09, pp. 254-259.
- A. Vetter and R. Friedman, “Measurement of Field Asymmetry in Accelerating Cavities with Waveguide Couplers”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-09, pp. 58-60.
- M. Serio et al., “Multibunch Instabilities and Cures”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THX03A, pp. 148-152.
- P. Van Vaerenbergh et al., “Stainless Steel Vacuum Chambers for the EBS Storage Ring”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 118-120.
- R. N. Xu, C. L. Guo, D. M. Li, R. Li, S. Tan, and W. F. Wu, “Digital Power Supply Controller Development Based on FPGA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA019, pp. 702-704.
- G. Gulbekian, I. Ivanenko, J. Franko, and J. Keniz, “DC-72 CYCLOTRON MAGNETIC FIELD FORMATION”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WENO12, pp. 147-49.
- C. S. Mishra, “Progress in Cryomodules & Cavities in India”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THIAKI06, pp. 2683-2683.
- M. Antonelli et al., “Fast Beam Diagnostics for Third-Generation Synchrotrons by Means of Novel Diamond-based Photon BPMs”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3541-3543.
- V. J. Kovarik, R. F. Lankshear, and Th. Sluyters, “The Preinjector of the BNL 200 MeV Linear Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 87-90.
- M. Doleans et al., “Optics Improvements Of The K500 Axial Injection Line”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 319-324.
- G. Wang et al., “Radiation Safety Interlock System for DCLS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA026, pp. 3198-3200.
- P. Balleyguier, “External Q Studies for APT SC-Cavity Couplers”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4037, pp. 133-135.
- C. D. Moore, R. Coleman, G. Goderre, and M. J. Yang, “Tevatron Extraction Modelling”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1498-1501.
- R. Cohen, E. Baron, and J. Rainwater, “Nevis Synchrocyclotron Improvement Program”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 764-767.
- R. MacGill and R. Yourd, “Mechanical Design of a Heavy Ion RFQ”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3004-3007.
- A. Galimberti and C. Scafuri, “A Preliminary Study on High Precision Photon Beam Position Monitor Design for Local Feedback Systems”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP47G, pp. 1506-1508.
- T. Oshima et al., “All-Solid-State Picosecond Laser System for Photo Cathode RF-Gun and X-Ray Generation at Waseda University”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH135, pp. 2400-2402.
- C. Ronsivalle, L. Picardi, A. Vignati, A. Tata, and M. Benassi, “Accelerators Development for IntraOperative Radiation Therapy”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH022, pp. 2494-2496.
- C. K. Sinclair, R. Klein, J. J. Murray, and M. Rabine, “A Polarized Photon Beam for the SLAC 82-Inch Hydrogen Bubble Chamber”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1065-1069.
- P. Michelini and C. Scafuri, “A New Alarm System Processor for ELETTRA”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP095L, pp. 1821-1823.
- M. Jablonka et al., “Beam Performances of MACSE, the Saclay Superconducting Test Accelerator”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 713-716.
- N. Kuklev, Y. K. Kim, S. Nagaitsev, A. L. Romanov, and A. Valishev, “IOTA Run 2 Beam Dynamics Studies in Nonlinear Integrable Systems”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1964-1967.
- T. Adachi, H. Someya, and F. Zhang, “Possibility of Waveform Manipulation of the Magnet Current in the Resonant Network”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A05, pp. 2193-2195.
- E. J. Siskind, A. E. Gromme, and M. J. Browne, “Front End Camac Controller for SLAC Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP022, pp. XX-XX.
- A. Yamashita, “Distributed Database in SPring-8”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP531, pp. XX-XX.
- G. Muelhaupt, G. Schmidt, and U. Weinrich, “First Results of Beam Storing in the ESRF Booster Synchrotron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP037G, pp. 635-637.
- T. Powers et al., “Commissioning and Operational Experience with an Intermediate Upgrade Cryomodule for the CEBAF 12 GeV Upgrade”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP44, pp. 563-563.
Back to search