Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. H. Kim, C. Doose, K. Kim, R. Hogrefe, and R. Merl, “Magnet Measurement Facility for the 7-GeV Advanced Photon Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2802-2805.
[n] V. N. Litvinenko, Y. Wu, B. Burnham, J.M.J. Madey, and S. H. Park, “Performance of Achromatic Lattice with Combined Function Sextupoles at Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB22, pp. 796-798.
[n] A. Gabriel et al., “Design and Testing of a High-Gradient mm-Wave Accelerator Prototype”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA058, unpublished.
[n] C. A. Thomas, I. P. S. Martin, and G. Rehm, “Diagnostics Beamline Optimisation and Image Processing for Sub-ps Streak Camera Bunch Length Measurement”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA42, pp. 445-448.
[n] R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211.
[n] J. E. Dey and I. Kourbanis, “A New Main Injector Radio Frequency System For 2.3 MW Project X Operations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP131, pp. 1079-1081.
[n] S. O. Schriber and J. M. Potter, “Limitations of the Disk-and-Washer Structure”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S3-8, pp. 176-179.
[n] A. Blednykh et al., “High Current Limitations for the NSLS-II Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD084, pp. 2108-2110.
[n] T. Kikuchi et al., “Numerical Study on Simultaneous Use of Stochastic Cooling and Electron Cooling with Internal Target at COSY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD070, pp. 852-854.
[n] D. C. Plostinar, “MEBT Design for the RAL Front End Test Stand”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD059, pp. 819-821.
[n] S. Kedia, R. Ahuja, R. Kumar, and R. Mehta, “Design Validation of a Chopping and Deflecting System for the High Current Injector at IUAC”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 869-871. doi:10.18429/JACoW-LINAC2018-THPO080
[n] M. Braeuer, U. Hahn, and S. Toleikis, “A Mechanical Shutter to Select Single Bunch Trains at the FLASH Facility at DESY”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH064, pp. 470-473.
[n] Z. Y. Lin et al., “A Novel Double Sideband-Based Phase Averaging Line for Phase Reference Distribution System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4901-4904. doi:10.18429/JACoW-IPAC2018-THPML101
[n] W. Graves et al., “Electron Beam Diagnostic Based on a Short Seeded FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP068, pp. XX-XX.
[n] J. Corbett, R. Hettel, D. Keeley, I. Linscott, and J. Sebek, “Algorithms for Orbit Control on SPEAR”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1583-1586.
[n] Y. Yuri et al., “Beam Uniformization System Using Multipole Magnets at the JAEA AVF Cyclotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC045, pp. 3077-3079.
[n] G. A. Loew et al., “High-Gradient Studies on 11.4 GHz Copper Accelerator Structures”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-39, pp. 716-718.
[n] R. Palmer, “Damped Acceleration Cavities”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH1-01, pp. 477-480.
[n] T. Egenolf, O. Boine-Frankenheim, and U. Niedermayer, “Simulations of DLA Grating Structures in the Frequency Domain”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3247-3249. doi:10.18429/JACoW-IPAC2017-WEPVA002
[n] G. Arduini et al., “Electron Cloud: Observations with LHC-Type Beams in the SPS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B16, pp. 939-941.
For LaTeX
Use Complete Form
For BibTeX
References
- S. H. Kim, C. Doose, K. Kim, R. Hogrefe, and R. Merl, “Magnet Measurement Facility for the 7-GeV Advanced Photon Source”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2802-2805.
- V. N. Litvinenko, Y. Wu, B. Burnham, J.M.J. Madey, and S. H. Park, “Performance of Achromatic Lattice with Combined Function Sextupoles at Duke Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAB22, pp. 796-798.
- A. Gabriel et al., “Design and Testing of a High-Gradient mm-Wave Accelerator Prototype”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA058, unpublished.
- C. A. Thomas, I. P. S. Martin, and G. Rehm, “Diagnostics Beamline Optimisation and Image Processing for Sub-ps Streak Camera Bunch Length Measurement”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA42, pp. 445-448.
- R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211.
- J. E. Dey and I. Kourbanis, “A New Main Injector Radio Frequency System For 2.3 MW Project X Operations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP131, pp. 1079-1081.
- S. O. Schriber and J. M. Potter, “Limitations of the Disk-and-Washer Structure”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S3-8, pp. 176-179.
- A. Blednykh et al., “High Current Limitations for the NSLS-II Booster”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD084, pp. 2108-2110.
- T. Kikuchi et al., “Numerical Study on Simultaneous Use of Stochastic Cooling and Electron Cooling with Internal Target at COSY”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD070, pp. 852-854.
- D. C. Plostinar, “MEBT Design for the RAL Front End Test Stand”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD059, pp. 819-821.
- S. Kedia, R. Ahuja, R. Kumar, and R. Mehta, “Design Validation of a Chopping and Deflecting System for the High Current Injector at IUAC”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 869-871.
- M. Braeuer, U. Hahn, and S. Toleikis, “A Mechanical Shutter to Select Single Bunch Trains at the FLASH Facility at DESY”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH064, pp. 470-473.
- Z. Y. Lin et al., “A Novel Double Sideband-Based Phase Averaging Line for Phase Reference Distribution System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4901-4904.
- W. Graves et al., “Electron Beam Diagnostic Based on a Short Seeded FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP068, pp. XX-XX.
- J. Corbett, R. Hettel, D. Keeley, I. Linscott, and J. Sebek, “Algorithms for Orbit Control on SPEAR”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1583-1586.
- Y. Yuri et al., “Beam Uniformization System Using Multipole Magnets at the JAEA AVF Cyclotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC045, pp. 3077-3079.
- G. A. Loew et al., “High-Gradient Studies on 11.4 GHz Copper Accelerator Structures”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-39, pp. 716-718.
- R. Palmer, “Damped Acceleration Cavities”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH1-01, pp. 477-480.
- T. Egenolf, O. Boine-Frankenheim, and U. Niedermayer, “Simulations of DLA Grating Structures in the Frequency Domain”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3247-3249.
- G. Arduini et al., “Electron Cloud: Observations with LHC-Type Beams in the SPS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B16, pp. 939-941.
Back to search