Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Cichalewski et al., “The RF Protection Interlock System Prototype Verification”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1406-1410. doi:10.18429/JACoW-ICALEPCS2023-THPDP041
[n] Y. Baconnier et al., “The CERN PS as e/e- Accelerator in the LEP Injector Chain: First Results,”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 857-860.
[n] E. Demmel and W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3432-3435.
[n] J. J. Song, P. J. Matthews, and J. Zhou, “Longitudinal Coupling Impedance of a Bellows and a Ceramic Gap in a Circular Beam Pipe for the Advanced Photon Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1336-1339.
[n] K. Yanagida et al., “Installation of The SPring-8 Linac BPM System”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU455, pp. 446-448.
[n] H. Geng, W. B. Liu, W. Qiao, Q. Qin, Y. F. Sui, and Y. Yue, “Emittance Measurement with Multi-wire Scanners for BEPC-II Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME031, pp. 541-543.
[n] C. R. Prior et al., “ISIS Megawatt Upgrade Plans”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG043, pp. 1527-1529.
[n] K. Ko et al., “Design Parameters for the Damped Detuned Accelerating Structure”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA04, pp. 1058-1060.
[n] Y. Shimosaki et al., “Specific Beam Dynamics in Super-bunch Acceleration”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT110, pp. 2110-2112.
[n] M. A. Jebramcik and J. M. Jowett, “Moving Long-range Beam-beam Encounters in Heavy-ion Colliders”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 488-491. doi:10.18429/JACoW-IPAC2019-MOPMP025
[n] M. Schwarz et al., “Beam Dynamics Simulations for the New Superconducting CW Heavy Ion LINAC at GSI”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 959-961. doi:10.18429/JACoW-IPAC2018-TUPAK003
[n] S. Cantacuzene, P. Bosland, J. Gobin, M. Juillard, and J. Martignac, “Elaboration and Characterization of Nb and NbTiN Superconducting Thin Films for RF Applications”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2074-2077.
[n] E. R. Harms and H. T. Edwards, “X-Ray Tomography Inspection of SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper WEIOA05, pp. 588-592.
[n] N. Malitsky, J. Smith, and J. Wei, “A Prototype of the UAL 2.0 Application Toolkit”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP013, pp. XX-XX.
[n] A. Altmark and A. Kanareykin, “Transverse Dynamics of a Ring Beam in a Coaxial Two-Channel Dielectric Waveguide”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB029, pp. 379-381.
[n] A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2898-2901.
[n] S. C. Joshi et al., “Prototype Engineering Design of 350 MHz 4.5 MeV RFQ for Proposed Proton Linac for Indian ADS Program”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH470, pp. 758-760.
[n] W. J. Corbett, M. H. R. Donald, and A. A. Garren, “An Isochronous Lattice for PEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2868-2871.
[n] J. Rose et al., “A SCRF Linac as a FEL Driver and Storage Ring Injector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB036, pp. 2808-2810.
[n] K. H. Mess, G.-J. Coelingh, and K. Dahlerup-Petersen, “Results from Commissioning of the Energy Extraction Facilities of the LHC Machine”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC134, pp. 1383-1385.
[n] A. Febel and G. Hemmie, “PIA, the Positron Intensity Accumulator for the PETRA Injection”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3244-3246.
[n] S. Suzuki et al., “Improvements of SPring-8 Linac towards Top-up Operation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT075, pp. 1327-1329.
[n] A. H. Lumpkin, F. Sakamoto, and B. X. Yang, “Dual-Sweep Streak Camera Measurements of the APS User Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT086, pp. 4185-4187.
[n] I. Borchardt et al., “Installation of the Superconducting Magnets in the HERA Tunnel”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 857-860.
[n] T. J. Peterson et al., “650 MHz Cryomodules for Project X at Fermilab ÔÇô Requirements and Concepts”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO003, pp. 34-38.
[n] T. Taniuchi, T. Higo, K. Kubo, M. Yamamoto, and K. Takata, “Damped Structure for JLC X-Band Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-41, pp. 157-159.
[n] T. Taylor and J. S. C. Wills, “Enhanced High-Current ECR Proton Source”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-20, pp. 350-352.
[n] V. Yakovlev, O. Danilov, O. Nezhevenko, and V. Tarnetsky, “Numerical Simulation of Magnicon Amplifier”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ21, pp. 1569-1571.
[n] M. M. Faber, C. W. Potts, and R. A. Zolecki, “Operating Experience with the Resonance Extraction Slow Spill Control System at the Zero Gradient Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1437-1440.
[n] D. Fonnesu et al., “CERN Based T_c Measurement Station for Thin-Film Coated Copper Samples and Results on Related Studies”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 105. doi:10.18429/JACoW-SRF2021-SUPFDV018
[n] H. Geng et al., “Status of CEPC Lattice Design”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THT4B4, pp. 45-48.
[n] A. Yamazaki et al., “Manipulation of Electron Beam Generation with Modified Magnetic Circuit on Laser-wakefield Acceleration”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN034, pp. 2790-2792.
[n] K. L. Erdman, “Invited Paper: Recent Developments at TRIUMF”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-02, pp. 1958-1964.
[n] M. Miski-Oglu et al., “Beam Commissioning of the Demonstrator Setup for the Superconducting Continuous Wave HIM/GSI-Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 33-36. doi:10.18429/JACoW-IPAC2019-MOZZPLM1
[n] M. Farkhondeh, K. A. Dow, W. W. Sapp, and J. D. Zumbro, “Magnetic Measurement, Fiducialization and Alignment of Large Dipoles for the MIT-Bates SHR”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2941-2944.
[n] P. Gayet, A. Juillerat, H. K. Kuhn, M. Rabany, and J. C. Wolles, “Experience with the Multi-Year Implementation of an Industrial Control System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B17, pp. 2432-2434.
For LaTeX
Use Complete Form
For BibTeX
References
- W. Cichalewski et al., “The RF Protection Interlock System Prototype Verification”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP041, pp. 1406-1410.
- Y. Baconnier et al., “The CERN PS as e/e- Accelerator in the LEP Injector Chain: First Results,”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 857-860.
- E. Demmel and W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3432-3435.
- J. J. Song, P. J. Matthews, and J. Zhou, “Longitudinal Coupling Impedance of a Bellows and a Ceramic Gap in a Circular Beam Pipe for the Advanced Photon Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1336-1339.
- K. Yanagida et al., “Installation of The SPring-8 Linac BPM System”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU455, pp. 446-448.
- H. Geng, W. B. Liu, W. Qiao, Q. Qin, Y. F. Sui, and Y. Yue, “Emittance Measurement with Multi-wire Scanners for BEPC-II Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME031, pp. 541-543.
- C. R. Prior et al., “ISIS Megawatt Upgrade Plans”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG043, pp. 1527-1529.
- K. Ko et al., “Design Parameters for the Damped Detuned Accelerating Structure”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA04, pp. 1058-1060.
- Y. Shimosaki et al., “Specific Beam Dynamics in Super-bunch Acceleration”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT110, pp. 2110-2112.
- M. A. Jebramcik and J. M. Jowett, “Moving Long-range Beam-beam Encounters in Heavy-ion Colliders”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 488-491.
- M. Schwarz et al., “Beam Dynamics Simulations for the New Superconducting CW Heavy Ion LINAC at GSI”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 959-961.
- S. Cantacuzene, P. Bosland, J. Gobin, M. Juillard, and J. Martignac, “Elaboration and Characterization of Nb and NbTiN Superconducting Thin Films for RF Applications”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2074-2077.
- E. R. Harms and H. T. Edwards, “X-Ray Tomography Inspection of SRF Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper WEIOA05, pp. 588-592.
- N. Malitsky, J. Smith, and J. Wei, “A Prototype of the UAL 2.0 Application Toolkit”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP013, pp. XX-XX.
- A. Altmark and A. Kanareykin, “Transverse Dynamics of a Ring Beam in a Coaxial Two-Channel Dielectric Waveguide”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB029, pp. 379-381.
- A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2898-2901.
- S. C. Joshi et al., “Prototype Engineering Design of 350 MHz 4.5 MeV RFQ for Proposed Proton Linac for Indian ADS Program”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH470, pp. 758-760.
- W. J. Corbett, M. H. R. Donald, and A. A. Garren, “An Isochronous Lattice for PEP”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2868-2871.
- J. Rose et al., “A SCRF Linac as a FEL Driver and Storage Ring Injector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB036, pp. 2808-2810.
- K. H. Mess, G.-J. Coelingh, and K. Dahlerup-Petersen, “Results from Commissioning of the Energy Extraction Facilities of the LHC Machine”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC134, pp. 1383-1385.
- A. Febel and G. Hemmie, “PIA, the Positron Intensity Accumulator for the PETRA Injection”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3244-3246.
- S. Suzuki et al., “Improvements of SPring-8 Linac towards Top-up Operation”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT075, pp. 1327-1329.
- A. H. Lumpkin, F. Sakamoto, and B. X. Yang, “Dual-Sweep Streak Camera Measurements of the APS User Beams”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT086, pp. 4185-4187.
- I. Borchardt et al., “Installation of the Superconducting Magnets in the HERA Tunnel”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 857-860.
- T. J. Peterson et al., “650 MHz Cryomodules for Project X at Fermilab ÔÇô Requirements and Concepts”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO003, pp. 34-38.
- T. Taniuchi, T. Higo, K. Kubo, M. Yamamoto, and K. Takata, “Damped Structure for JLC X-Band Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-41, pp. 157-159.
- T. Taylor and J. S. C. Wills, “Enhanced High-Current ECR Proton Source”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-20, pp. 350-352.
- V. Yakovlev, O. Danilov, O. Nezhevenko, and V. Tarnetsky, “Numerical Simulation of Magnicon Amplifier”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ21, pp. 1569-1571.
- M. M. Faber, C. W. Potts, and R. A. Zolecki, “Operating Experience with the Resonance Extraction Slow Spill Control System at the Zero Gradient Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1437-1440.
- D. Fonnesu et al., “CERN Based T_c Measurement Station for Thin-Film Coated Copper Samples and Results on Related Studies”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 105.
- H. Geng et al., “Status of CEPC Lattice Design”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THT4B4, pp. 45-48.
- A. Yamazaki et al., “Manipulation of Electron Beam Generation with Modified Magnetic Circuit on Laser-wakefield Acceleration”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN034, pp. 2790-2792.
- K. L. Erdman, “Invited Paper: Recent Developments at TRIUMF”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-02, pp. 1958-1964.
- M. Miski-Oglu et al., “Beam Commissioning of the Demonstrator Setup for the Superconducting Continuous Wave HIM/GSI-Linac”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 33-36.
- M. Farkhondeh, K. A. Dow, W. W. Sapp, and J. D. Zumbro, “Magnetic Measurement, Fiducialization and Alignment of Large Dipoles for the MIT-Bates SHR”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2941-2944.
- P. Gayet, A. Juillerat, H. K. Kuhn, M. Rabany, and J. C. Wolles, “Experience with the Multi-Year Implementation of an Industrial Control System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B17, pp. 2432-2434.
Back to search