Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Koda et al., “Feasibility Study on Introducing a Superconducting Wiggler to Saga Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE006, pp. 1021-1023.
[n] Y. Tian, L. R. Dalesio, G. Ganetis, W. Louie, and J. Riciardelli, “Power Supply Control System of NSLS-II”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEB005, pp. 385-387.
[n] J. Irwin and T. Chen, “A Map for the Thick Beam-Beam Interaction”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP09, pp. 2904-2906.
[n] S. Liu et al., “First results of the Hard X-Ray Self-Seeding Commissioning at the European XFEL”, in Proc. IPAC'20, Caen, France, May 2020, paper MOVIR09, pp. XX-XX.
[n] C. Benvenuti et al., “Properties of Copper Cavities Coated with Niobium Using Different Discharge Gases”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D27, pp. 1057-1064.
[n] P. K. Sigg, J. Cherix, H. Frei, and M. M?ñrki, “Experience with the PSI-Cyclotron RF-System Under Heavy Beam Loading”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XA-08, pp. 534-537.
[n] A. Ts. Amatuni, S. G. Arutunian, S. S. Elbakian, M. R. Mailian, and M. L. Petrossian, “Possible Energy Increase of High Current Electron Accelerators”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA117, pp. 3657-3659.
[n] J. Irwin et al., “The Optics of the Final Focus Test Beam”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2058-2061.
[n] B. Molas, L. Aballe, M. Foerster, A. Fontsere Recuenco, O. Matilla, and J. Moldes, “Synchrotron Master Frequency Reconstruction for Sub-Nanosecond Time-Resolved XMCD-PEEM Experiments”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1577-1581. doi:10.18429/JACoW-ICALEPCS2017-THPHA084
[n] F. L. Krawczyk, S. J. Cooke, D. C. Nguyen, B. Rusnak, T. I. Smith, and E. L. Wright, “RF Design of a Spoke Resonator for High Power Free-Electron Lasers”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP037, pp. 866-866.
[n] M. Pasini et al., “SC Nb Sputtered QWRs for the REX-ISOLDE Accelerator at CERN: Prototype Design and Manufacturing”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP022, pp. 827-829.
[n] R. Chehab et al., “First Results Concerning a Crystal Radiator Dedicated to Positron Production by Photons from Channeled Multi-Gev Electrons”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3093-3096.
[n] Q. S. Shu et al., “High Power Coupler for the TESLA Superstructure Cavities”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT051, pp. 3141-3143.
[n] H. Hotchi, “Lessons from 1-MW Proton RCS Beam Tuning”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOXLR02, pp. 6-11.
[n] L. Elementi et al., “Mu2e AC Dipole 300 kHz and 5.1 MHz Tests and Comparison of Nickel-Zinc Ferrites”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD017, pp. 3533-3535.
[n] J. Harasimowicz and C. P. Welsch, “Beam Position Monitor Development for the USR”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM047, pp. 252-256.
[n] H. Iwata, O. Hara, N. Kaneko, T. Nakashizu, and T. Takahashi, “A 100 MeV Linac for the SR Light Source”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-02, pp. 606-608.
[n] A. Argan, F. Console, S. De Santis, M. Migliorati, and L. Palumbo, “Measurements of the Longitudinal Impedance of a Coaxial Cavity coupled with a Circular Pipe through Slots”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B08, pp. 1426-1428.
[n] J. Holma and M. J. Barnes, “Evaluation of Components for the High Precision Inductive Adder for the CLIC Damping Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD076, pp. 3692-3694.
[n] M. Musardo, D. A. Harder, C. A. Kitegi, and T. Tanabe, “Magnetic Measurements of the NSLS-II Insertion Devices”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1693-1695. doi:10.18429/JACoW-IPAC2015-TUPJE037
[n] X. Y. Xu and Y. B. Leng, “Beam Coupling Impedance Analyze Using Bunch-by-Bunch Measurement”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 202-205. doi:10.18429/JACoW-IBIC2020-THAO04
[n] T. Ota et al., “Development of the Superconducting Cavity for ILC at TOSHIBA”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO023, pp. 418-420.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Koda et al., “Feasibility Study on Introducing a Superconducting Wiggler to Saga Light Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE006, pp. 1021-1023.
- Y. Tian, L. R. Dalesio, G. Ganetis, W. Louie, and J. Riciardelli, “Power Supply Control System of NSLS-II”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEB005, pp. 385-387.
- J. Irwin and T. Chen, “A Map for the Thick Beam-Beam Interaction”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAP09, pp. 2904-2906.
- S. Liu et al., “First results of the Hard X-Ray Self-Seeding Commissioning at the European XFEL”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOVIR09, pp. XX-XX.
- C. Benvenuti et al., “Properties of Copper Cavities Coated with Niobium Using Different Discharge Gases”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D27, pp. 1057-1064.
- P. K. Sigg, J. Cherix, H. Frei, and M. M?ñrki, “Experience with the PSI-Cyclotron RF-System Under Heavy Beam Loading”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XA-08, pp. 534-537.
- A. Ts. Amatuni, S. G. Arutunian, S. S. Elbakian, M. R. Mailian, and M. L. Petrossian, “Possible Energy Increase of High Current Electron Accelerators”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA117, pp. 3657-3659.
- J. Irwin et al., “The Optics of the Final Focus Test Beam”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2058-2061.
- B. Molas, L. Aballe, M. Foerster, A. Fontsere Recuenco, O. Matilla, and J. Moldes, “Synchrotron Master Frequency Reconstruction for Sub-Nanosecond Time-Resolved XMCD-PEEM Experiments”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1577-1581.
- F. L. Krawczyk, S. J. Cooke, D. C. Nguyen, B. Rusnak, T. I. Smith, and E. L. Wright, “RF Design of a Spoke Resonator for High Power Free-Electron Lasers”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP037, pp. 866-866.
- M. Pasini et al., “SC Nb Sputtered QWRs for the REX-ISOLDE Accelerator at CERN: Prototype Design and Manufacturing”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP022, pp. 827-829.
- R. Chehab et al., “First Results Concerning a Crystal Radiator Dedicated to Positron Production by Photons from Channeled Multi-Gev Electrons”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3093-3096.
- Q. S. Shu et al., “High Power Coupler for the TESLA Superstructure Cavities”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT051, pp. 3141-3143.
- H. Hotchi, “Lessons from 1-MW Proton RCS Beam Tuning”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOXLR02, pp. 6-11.
- L. Elementi et al., “Mu2e AC Dipole 300 kHz and 5.1 MHz Tests and Comparison of Nickel-Zinc Ferrites”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD017, pp. 3533-3535.
- J. Harasimowicz and C. P. Welsch, “Beam Position Monitor Development for the USR”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM047, pp. 252-256.
- H. Iwata, O. Hara, N. Kaneko, T. Nakashizu, and T. Takahashi, “A 100 MeV Linac for the SR Light Source”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-02, pp. 606-608.
- A. Argan, F. Console, S. De Santis, M. Migliorati, and L. Palumbo, “Measurements of the Longitudinal Impedance of a Coaxial Cavity coupled with a Circular Pipe through Slots”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1B08, pp. 1426-1428.
- J. Holma and M. J. Barnes, “Evaluation of Components for the High Precision Inductive Adder for the CLIC Damping Rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD076, pp. 3692-3694.
- M. Musardo, D. A. Harder, C. A. Kitegi, and T. Tanabe, “Magnetic Measurements of the NSLS-II Insertion Devices”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1693-1695.
- X. Y. Xu and Y. B. Leng, “Beam Coupling Impedance Analyze Using Bunch-by-Bunch Measurement”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 202-205.
- T. Ota et al., “Development of the Superconducting Cavity for ILC at TOSHIBA”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO023, pp. 418-420.
Back to search