Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Campmany, D. Einfeld, J. Marcos, and V. Massana, “General description of IDs initially installed at ALBA”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA055, pp. 2609-2611.
[n] T. Spangenberg, K. Cerff, W. Mexner, and V. Kaiser, “TANGO Integration of a SIMATIC WinCC Open Architecture SCADA System at ANKA”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN020, pp. 749-751.
[n] E. Quaranta, C. Bracco, R. Bruce, and S. Redaelli, “Validation of Simulation Tools for Fast Beam Failure Studies in the LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2506-2509. doi:10.18429/JACoW-IPAC2016-WEPMW033
[n] A. Reppond, M. Ambrosia, B. C. Hansen, C. R. Meitzler, D. P. Redden, and D. A. Swenson, “A Small 1 MeV Electron Accelerator for Measuring Heavy Metal Concentrations in Smokestack Gases”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P118, pp. 3872-3874.
[n] L. G. Sukhikh et al., “Focusing of Optical Transition and Diffraction Radiation by a Spherical Target”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB13, pp. 259-261.
[n] D. Einfeld, “Status of the ALBA Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP020, pp. 1135-1137.
[n] G. Dutto et al., “The TRIUMF 500 MeV Cyclotron: Present Operation and Intensity Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE016, pp. 1584-1586.
[n] L. Hagge et al., “Making Engineering Data Available at the European XFEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC080, pp. 3077-3079.
[n] M. Pedrozzi et al., “SwissFEL Injector Test Facility ÔÇô Test and Plans”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB30, pp. 625-628.
[n] N. Yamamoto et al., “Implementing Portable Channel Access Server Software in the KEKB Accelerator Control System”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D044, pp. 498-500.
[n] R. De Maria, M. Giovannozzi, T. Persson, R. Tomas, and Y. Wei, “Analysis of Intensity-dependent Effects on LHC Transverse Tunes at Injection Energy”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2108-2111. doi:10.18429/JACoW-IPAC2015-TUPTY043
[n] L. Hagge, J. A. Dammann, S. Eucker, J. Iversen, J. Kreutzkamp, and W. Singer, “PLM-Based Quality Assurance in the Series Production of the Superconducting Cavities for the European XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC004, pp. 2209-2211.
[n] T. S. McGuckin, “Switching the Jefferson Lab Accelerator Operations Environment from an HP-UX Unix-based to a PC/Linux-based Environment”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOX03, pp. 7-9.
[n] J. T. Morris, T. S. Clifford, B. Frak, J. Laster, A. Marusic, and J. van Zeijts, “RHIC Power Supply Ramp Diagnostics”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP039, pp. XX-XX.
[n] J. Culver, K. Antes, F. R. Huson, A. Larsson, C. R. Meitzler, and L. Xiu, “Progress in H- ion Source Development at TAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2008-2011.
[n] N. Kamikubota et al., “Prototype Control System of the 60-MeV Proton Linac for the J-PARC Project”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP517, pp. XX-XX.
[n] H. Nakabushi, “A Superconducting Compact SR Ring AURORA for X-Ray Lithography”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 206-209.
[n] G. V. Eremeev, A-M. Valente-Feliciano, A. T. Wu, and D. Gu, “Exploring the Effect of AL2O3 ALD Coating on a High Gradient ILC Single-Cell Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC096, pp. 2441-2443.
[n] A. L. Romanov, I. Koop, E. Perevedentsev, and D. B. Shwartz, “Beam Phase Space Reconstruction for Monitoring the Luminosity in the VEPP-2000 Collider”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3623-3625. doi:10.18429/JACoW-IPAC2014-THPME155
[n] X. Y. Wu, D. Lawton, F. Marti, and A. F. Zeller, “Design of the Injection Channel Magnets for the K1200 Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-25, pp. XX-XX.
[n] L. Hagge, J. Kreutzkamp, S. Lang, S. Suehl, and N. Welle, “Examples for 3D CAD Models at the European XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB015, pp. 3266-3268.
[n] E. Quaranta et al., “Towards Optimum Material Choices for the HL-LHC Collimator Upgrade”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2498-2501. doi:10.18429/JACoW-IPAC2016-WEPMW031
[n] H. Ikeda, M. Kikuchi, K. Ohmi, K. Oide, and D. Zhou, “Coherent Synchrotron Radiation Predicted at the SuperKEKB Damping Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME014, pp. 1595-1597.
[n] L. Hagge et al., “Configuration Management in the Series Production of the XFEL Accelerator Modules”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2863-2866. doi:10.18429/JACoW-IPAC2014-THPRO006
[n] P. M. McIntyre et al., “Accelerator-Driven Subcritical Fission To Destroy Transuranics and Close the Nuclear Fuel Cycle”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOZAB1, pp. 62-66.
[n] J. M. Kats, “Particle Longitudinal Diffusion Produced by High Frequency Cavity”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1281-1284.
[n] N. Ueda et al., “An RFQ Linac for Heavy Ion Acceleration”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H14, pp. 299-301.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Campmany, D. Einfeld, J. Marcos, and V. Massana, “General description of IDs initially installed at ALBA”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA055, pp. 2609-2611.
- T. Spangenberg, K. Cerff, W. Mexner, and V. Kaiser, “TANGO Integration of a SIMATIC WinCC Open Architecture SCADA System at ANKA”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKN020, pp. 749-751.
- E. Quaranta, C. Bracco, R. Bruce, and S. Redaelli, “Validation of Simulation Tools for Fast Beam Failure Studies in the LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2506-2509.
- A. Reppond, M. Ambrosia, B. C. Hansen, C. R. Meitzler, D. P. Redden, and D. A. Swenson, “A Small 1 MeV Electron Accelerator for Measuring Heavy Metal Concentrations in Smokestack Gases”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P118, pp. 3872-3874.
- L. G. Sukhikh et al., “Focusing of Optical Transition and Diffraction Radiation by a Spherical Target”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB13, pp. 259-261.
- D. Einfeld, “Status of the ALBA Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP020, pp. 1135-1137.
- G. Dutto et al., “The TRIUMF 500 MeV Cyclotron: Present Operation and Intensity Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE016, pp. 1584-1586.
- L. Hagge et al., “Making Engineering Data Available at the European XFEL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC080, pp. 3077-3079.
- M. Pedrozzi et al., “SwissFEL Injector Test Facility ÔÇô Test and Plans”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPB30, pp. 625-628.
- N. Yamamoto et al., “Implementing Portable Channel Access Server Software in the KEKB Accelerator Control System”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D044, pp. 498-500.
- R. De Maria, M. Giovannozzi, T. Persson, R. Tomas, and Y. Wei, “Analysis of Intensity-dependent Effects on LHC Transverse Tunes at Injection Energy”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2108-2111.
- L. Hagge, J. A. Dammann, S. Eucker, J. Iversen, J. Kreutzkamp, and W. Singer, “PLM-Based Quality Assurance in the Series Production of the Superconducting Cavities for the European XFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC004, pp. 2209-2211.
- T. S. McGuckin, “Switching the Jefferson Lab Accelerator Operations Environment from an HP-UX Unix-based to a PC/Linux-based Environment”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOX03, pp. 7-9.
- J. T. Morris, T. S. Clifford, B. Frak, J. Laster, A. Marusic, and J. van Zeijts, “RHIC Power Supply Ramp Diagnostics”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP039, pp. XX-XX.
- J. Culver, K. Antes, F. R. Huson, A. Larsson, C. R. Meitzler, and L. Xiu, “Progress in H- ion Source Development at TAC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2008-2011.
- N. Kamikubota et al., “Prototype Control System of the 60-MeV Proton Linac for the J-PARC Project”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP517, pp. XX-XX.
- H. Nakabushi, “A Superconducting Compact SR Ring AURORA for X-Ray Lithography”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 206-209.
- G. V. Eremeev, A-M. Valente-Feliciano, A. T. Wu, and D. Gu, “Exploring the Effect of AL2O3 ALD Coating on a High Gradient ILC Single-Cell Cavity”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC096, pp. 2441-2443.
- A. L. Romanov, I. Koop, E. Perevedentsev, and D. B. Shwartz, “Beam Phase Space Reconstruction for Monitoring the Luminosity in the VEPP-2000 Collider”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3623-3625.
- X. Y. Wu, D. Lawton, F. Marti, and A. F. Zeller, “Design of the Injection Channel Magnets for the K1200 Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-25, pp. XX-XX.
- L. Hagge, J. Kreutzkamp, S. Lang, S. Suehl, and N. Welle, “Examples for 3D CAD Models at the European XFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THEPPB015, pp. 3266-3268.
- E. Quaranta et al., “Towards Optimum Material Choices for the HL-LHC Collimator Upgrade”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2498-2501.
- H. Ikeda, M. Kikuchi, K. Ohmi, K. Oide, and D. Zhou, “Coherent Synchrotron Radiation Predicted at the SuperKEKB Damping Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME014, pp. 1595-1597.
- L. Hagge et al., “Configuration Management in the Series Production of the XFEL Accelerator Modules”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2863-2866.
- P. M. McIntyre et al., “Accelerator-Driven Subcritical Fission To Destroy Transuranics and Close the Nuclear Fuel Cycle”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOZAB1, pp. 62-66.
- J. M. Kats, “Particle Longitudinal Diffusion Produced by High Frequency Cavity”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1281-1284.
- N. Ueda et al., “An RFQ Linac for Heavy Ion Acceleration”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H14, pp. 299-301.
Back to search