Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K.Chernov, A.Frolov, Ye.Gusev, N.Kot, S.Krutikhin, I.Kuptsov, G.Kurkin, I.Makarov, N.Matyash, L.Mironenko, S.Motygin, V.Osipov, G.Ostreiko, V.Petrov, A.Popov, E.Rotov, I.Sedlyarov, G.Serdobintsev, A.Shteinke, V.Tarnetsky, V.Volkov (Budker Institute of), “Startup of RF System for VEPP-5 Booster Ring”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOCP08, pp. XX-XX.
[n] A. Young and H. Hassanzadegan, “Design of a New Super-heterodyne MicroTCA.4 BPM and LLRF Rear Transition Module (RTM) for the European Spallation”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 433-436. doi:10.18429/JACoW-IBIC2015-TUPB051
[n] Y. Yano, A. Goto, and T. Katayama, “RIKEN RI-Beam Factory Project”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8B004, pp. 930-934.
[n] E.-S. Kim, “Design and Control of Emittance Growth of Short Bunch Compressor for International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN045, pp. 2814-2816.
[n] J. Bosser and G. Ferioli Geneva, “Comparative test results of various beam loss monitors in preparation for LHC”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PS14, pp. XX-XX.
[n] D. J. Bromberek, W. G. Jansma, T. L. Smith, and G. J. Waldschmidt, “Mechanical Straightening of the 3-m Accelerating Structures at the Advanced Photon Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1051-1053. doi:10.18429/JACoW-NAPAC2016-WEPOB70
[n] S. A. Kahn and R. C. Gupta, “Radiation Tolerant Multipole Correction Coils for FRIB Quadrupoles”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA25, pp. 1283-1285.
[n] M. Hofer, F. S. Carlier, and R. Tom?ís, “K-Modulation in Future High Energy Colliders”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 476-479. doi:10.18429/JACoW-IPAC2019-MOPMP022
[n] L. M. Young and R. S. Biddle, “High-Power RF Controls for the NBS-Los Alamos Racetrack Microtron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2162-2165.
[n] M. G. Billing et al., “Recent Results for the Dependence of Beam Instabilities caused by Electron Clouds at CesrTA due to Variations in Bunch Spacing and Chromaticity”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1721-1723. doi:10.18429/JACoW-IPAC2014-TUPRI067
[n] S. A. Kahn, G. Flanagan, M. L. Lopes, and K. Yonehara, “Elliptical Muon Helical Cooling Channel Coils”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA26, pp. 1286-1288.
[n] T. Kikuchi, T. Katayama, and S. M. Lund, “Possible Parameters for Bunch Compression in a Ring in Future RIKEN Projects”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15015, pp. XX-XX.
[n] E.-S. Kim and K. Ohmi, “Ion Instability in the ILC Damping Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN037, pp. 4030-4032.
[n] E. A. Wadlinger, “RFQ Scaling-Law Implications and Examples”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-37, pp. 346-348.
[n] T. Katayama, M. Okamura, T. Tominaka, and N. Tsoupas, “Design Study of Helical Partial Snake Magnet for AGS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B14, pp. 2116-2118.
[n] C. L. Olson, “Ionization Front Accelerator”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-44, pp. 364-366.
For LaTeX
Use Complete Form
For BibTeX
References
- K.Chernov, A.Frolov, Ye.Gusev, N.Kot, S.Krutikhin, I.Kuptsov, G.Kurkin, I.Makarov, N.Matyash, L.Mironenko, S.Motygin, V.Osipov, G.Ostreiko, V.Petrov, A.Popov, E.Rotov, I.Sedlyarov, G.Serdobintsev, A.Shteinke, V.Tarnetsky, V.Volkov (Budker Institute of), “Startup of RF System for VEPP-5 Booster Ring”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MOCP08, pp. XX-XX.
- A. Young and H. Hassanzadegan, “Design of a New Super-heterodyne MicroTCA.4 BPM and LLRF Rear Transition Module (RTM) for the European Spallation”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 433-436.
- Y. Yano, A. Goto, and T. Katayama, “RIKEN RI-Beam Factory Project”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8B004, pp. 930-934.
- E.-S. Kim, “Design and Control of Emittance Growth of Short Bunch Compressor for International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN045, pp. 2814-2816.
- J. Bosser and G. Ferioli Geneva, “Comparative test results of various beam loss monitors in preparation for LHC”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PS14, pp. XX-XX.
- D. J. Bromberek, W. G. Jansma, T. L. Smith, and G. J. Waldschmidt, “Mechanical Straightening of the 3-m Accelerating Structures at the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1051-1053.
- S. A. Kahn and R. C. Gupta, “Radiation Tolerant Multipole Correction Coils for FRIB Quadrupoles”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA25, pp. 1283-1285.
- M. Hofer, F. S. Carlier, and R. Tom?ís, “K-Modulation in Future High Energy Colliders”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 476-479.
- L. M. Young and R. S. Biddle, “High-Power RF Controls for the NBS-Los Alamos Racetrack Microtron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2162-2165.
- M. G. Billing et al., “Recent Results for the Dependence of Beam Instabilities caused by Electron Clouds at CesrTA due to Variations in Bunch Spacing and Chromaticity”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1721-1723.
- S. A. Kahn, G. Flanagan, M. L. Lopes, and K. Yonehara, “Elliptical Muon Helical Cooling Channel Coils”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA26, pp. 1286-1288.
- T. Kikuchi, T. Katayama, and S. M. Lund, “Possible Parameters for Bunch Compression in a Ring in Future RIKEN Projects”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15015, pp. XX-XX.
- E.-S. Kim and K. Ohmi, “Ion Instability in the ILC Damping Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN037, pp. 4030-4032.
- E. A. Wadlinger, “RFQ Scaling-Law Implications and Examples”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-37, pp. 346-348.
- T. Katayama, M. Okamura, T. Tominaka, and N. Tsoupas, “Design Study of Helical Partial Snake Magnet for AGS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B14, pp. 2116-2118.
- C. L. Olson, “Ionization Front Accelerator”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-44, pp. 364-366.
Back to search
