Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Takaki et al., “The Lattice of the 1.0 GeV VSX Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP73, pp. 2436-2438.
[n] G. Enderlein, W. Korber, A. Matheisen, D. Proch, and F. Scholz, “Investigations on Hydrogen Contamination of Superconducting Cavities”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2432-2435.
[n] G. Ciavola et al., “The TRASCO High Current Proton Source and Its LEBT”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH433, pp. 674-676.
[n] K. Yamada, O. Kamigaito, N. Sakamoto, and K. Suda, “Conceptual Design of SC Linac for RIBF-Upgrade Plan”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP021, pp. 137-139.
[n] R. A. Kaye, K. W. Shepard, B. E. Clifft, and M. Kedzie, “Beam Tests of the 12 MHz RFQ RIB Injector for ATLAS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THDL4, pp. 524-526.
[n] P. Pierini, “A Multigrid-Based Beam Dynamics Code for High Current Proton Linacs”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP124, pp. 1776-1778.
[n] E.-S. Kim, “Accelerator Physics Issues at the 2.5 GeV PLS Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE045, pp. 2854-2856.
[n] A. S. Plastun, P. N. Ostroumov, A. C. C. Villari, and Q. Zhao, “Redesign of ReA3 4-Rod RFQ”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 807-809. doi:10.18429/JACoW-NAPAC2019-WEPLH03
[n] M. Benedikt and B. Goddard, “Design Optimization of PS2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE1GRI03, pp. 1828-1832.
[n] H. Burkhardt, G. Arduini, E. Benedetto, E. M?®tral, and G. Rumolo, “Observation of a Fast Single Bunch Transverse Instability on Protons in the SPS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT012, pp. 1843-1845.
[n] J. Ungrin, J. C. Brown, B. G. Chidley, G. E. McMichael, and S. O. Schriber, “Initial Operation of a 100% Duty Factor 3 MeV Alvarez Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3495-3498.
[n] W. Scandale and T. Taylor, “A Design Concept for the LHC Insertion Quadrupoles”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2260-2263.
[n] A. Tsinganis and F. Cerutti, “Impact of Collision Debris in the HL-LHC ATLAS and CMS Insertions”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2093-2096. doi:10.18429/JACoW-IPAC2017-TUPVA021
[n] D. Y. Yang et al., “Design and Research of a Micro-Pulse Electron Gun”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 466-469. doi:10.18429/JACoW-FEL2017-WEP024
[n] R. L. Geng and H. S. Padamsee, “Exploring Multipacting Characteristics of a Rectangular Waveguide”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THAL5, pp. 429-431.
[n] T. Yamamoto et al., “Design of 9.4 GHz 950 keV X-band Linac for Nondestructive Testing”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH182, pp. 2358-2360.
[n] T. Yokoi and S. Machida, “Beam Injection Into EMMA Non-scaling FFAG”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN082, pp. 2898-2900.
[n] G. Arduini, “Beam Quality Preservation in the CERN PS-SPS Complex”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUZBCH01, pp. 78-82.
[n] S. Assadi, F. Tecker, and M.-J. Yang, “Beam Transfer Line Tuning and Steering Based on Minimization Model Tools”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP26, pp. 711-713.
[n] R. L. Geng, A. Crawford, G. Eremeev, H. Padamsee, and J. Sears, “A 1500MHz Niobium Cavity Made of Electropolished Half-Cells”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB050, pp. 1312-1313.
[n] P. N. Ostroumov, J. R. Delayen, and K. W. Shepard, “Review of a Spoke-Cavity Design Option for the RIA Driver Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE056, pp. 3360-3362.
[n] F. Blas and R. Garoby, “Design and Operational Results of a One-Turn-Delay Feedback" for Beam Loading Compensation of the CERN PS Ferrite Cavities"”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1398-1401.
[n] M. A. Plum, T. J. Shea, S. Assadi, L. Doolittle, P. Cameron, and R. Connolly, “Diagnostic Challenges at SNS”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper IT08, pp. XX-XX.
[n] G. Wuestefeld, R. Maier, and B. Simon, “The Analytical Lattice Approach for the Ring Design of BESSY II”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 914-917.
[n] M. Liepe et al., “New Possibilities for Superconducting Cavity Testing at Cornell University”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB054, pp. 1323-1325.
[n] M. A. Plum, W. Christensen, R. E. Meyer Sr, and C. R. Rose, “The SNS Linac Wire Scanner System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB034, pp. 2485-2487.
[n] T. Nakamura, “The Broad-band Impedance of the SPring-8 Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP103G, pp. 1099-1101.
[n] A. Ueda, K. Harada, Y. Kobayashi, and T. Mitsuhashi, “Investigation of Injection for the Low-emittance Lattice with New-6.25 ohm Kicker Magnet System at the Photon Factory”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT069, pp. 710-712.
[n] T. Nakamura, “The Simulation Study of the Single Bunch Instabilities in the Spring-8 Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP104G, pp. 1102-1104.
[n] E.-S. Kim, “Design Considerations for SASE-FEL at PLS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB047, pp. 3111-3113.
[n] S. Henderson, “A Beamloss Diagnostic System for CESR”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P059, pp. 2029-2031.
[n] R. L. Geng, J. Knobloch, and H. Padamsee, “Micro-Structures of RF Surfaces in the Electron-Beam-Weld Regions of Niobium”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP021, pp. 238-245.
[n] R. L. Geng, “Multipacting Simulations for Superconducting Cavities and RF Coupler Waveguides”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPB002, pp. 264-268.
[n] A. Tsinganis, R. Bruce, F. Cerutti, and A. Lechner, “Impact on the HL-LHC Triplet Region and Experiments From Asynchronous Beam Dumps on Tertiary Collimators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 96-99. doi:10.18429/JACoW-IPAC2017-MOPAB011
[n] A. Meseck, M. Abo-Bakr, J. Bahrdt, and B. C. Kuske, “Source Characterization of BESSY Soft X-Ray FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP007, pp. XX-XX.
[n] E.-S. Kim, K.-M. Ha, S.-H. Nam, and J.-H. Seo, “Energy Ramping System in PLS Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO023, pp. 2025-2027.
[n] D. M. Li, Q. Gu, and Z. T. Zhao, “New Scheme of the SSRF Injector”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14018, pp. XX-XX.
[n] R. Maier, U. Pfister, and R. Theenhaus, “The COSY-Juelivh Project - May 1990 Status”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 131-134.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Takaki et al., “The Lattice of the 1.0 GeV VSX Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP73, pp. 2436-2438.
- G. Enderlein, W. Korber, A. Matheisen, D. Proch, and F. Scholz, “Investigations on Hydrogen Contamination of Superconducting Cavities”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2432-2435.
- G. Ciavola et al., “The TRASCO High Current Proton Source and Its LEBT”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH433, pp. 674-676.
- K. Yamada, O. Kamigaito, N. Sakamoto, and K. Suda, “Conceptual Design of SC Linac for RIBF-Upgrade Plan”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP021, pp. 137-139.
- R. A. Kaye, K. W. Shepard, B. E. Clifft, and M. Kedzie, “Beam Tests of the 12 MHz RFQ RIB Injector for ATLAS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THDL4, pp. 524-526.
- P. Pierini, “A Multigrid-Based Beam Dynamics Code for High Current Proton Linacs”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP124, pp. 1776-1778.
- E.-S. Kim, “Accelerator Physics Issues at the 2.5 GeV PLS Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE045, pp. 2854-2856.
- A. S. Plastun, P. N. Ostroumov, A. C. C. Villari, and Q. Zhao, “Redesign of ReA3 4-Rod RFQ”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 807-809.
- M. Benedikt and B. Goddard, “Design Optimization of PS2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE1GRI03, pp. 1828-1832.
- H. Burkhardt, G. Arduini, E. Benedetto, E. M?®tral, and G. Rumolo, “Observation of a Fast Single Bunch Transverse Instability on Protons in the SPS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT012, pp. 1843-1845.
- J. Ungrin, J. C. Brown, B. G. Chidley, G. E. McMichael, and S. O. Schriber, “Initial Operation of a 100% Duty Factor 3 MeV Alvarez Linac”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3495-3498.
- W. Scandale and T. Taylor, “A Design Concept for the LHC Insertion Quadrupoles”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2260-2263.
- A. Tsinganis and F. Cerutti, “Impact of Collision Debris in the HL-LHC ATLAS and CMS Insertions”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2093-2096.
- D. Y. Yang et al., “Design and Research of a Micro-Pulse Electron Gun”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 466-469.
- R. L. Geng and H. S. Padamsee, “Exploring Multipacting Characteristics of a Rectangular Waveguide”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THAL5, pp. 429-431.
- T. Yamamoto et al., “Design of 9.4 GHz 950 keV X-band Linac for Nondestructive Testing”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH182, pp. 2358-2360.
- T. Yokoi and S. Machida, “Beam Injection Into EMMA Non-scaling FFAG”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN082, pp. 2898-2900.
- G. Arduini, “Beam Quality Preservation in the CERN PS-SPS Complex”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUZBCH01, pp. 78-82.
- S. Assadi, F. Tecker, and M.-J. Yang, “Beam Transfer Line Tuning and Steering Based on Minimization Model Tools”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP26, pp. 711-713.
- R. L. Geng, A. Crawford, G. Eremeev, H. Padamsee, and J. Sears, “A 1500MHz Niobium Cavity Made of Electropolished Half-Cells”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB050, pp. 1312-1313.
- P. N. Ostroumov, J. R. Delayen, and K. W. Shepard, “Review of a Spoke-Cavity Design Option for the RIA Driver Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE056, pp. 3360-3362.
- F. Blas and R. Garoby, “Design and Operational Results of a One-Turn-Delay Feedback" for Beam Loading Compensation of the CERN PS Ferrite Cavities"”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1398-1401.
- M. A. Plum, T. J. Shea, S. Assadi, L. Doolittle, P. Cameron, and R. Connolly, “Diagnostic Challenges at SNS”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper IT08, pp. XX-XX.
- G. Wuestefeld, R. Maier, and B. Simon, “The Analytical Lattice Approach for the Ring Design of BESSY II”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 914-917.
- M. Liepe et al., “New Possibilities for Superconducting Cavity Testing at Cornell University”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB054, pp. 1323-1325.
- M. A. Plum, W. Christensen, R. E. Meyer Sr, and C. R. Rose, “The SNS Linac Wire Scanner System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB034, pp. 2485-2487.
- T. Nakamura, “The Broad-band Impedance of the SPring-8 Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP103G, pp. 1099-1101.
- A. Ueda, K. Harada, Y. Kobayashi, and T. Mitsuhashi, “Investigation of Injection for the Low-emittance Lattice with New-6.25 ohm Kicker Magnet System at the Photon Factory”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT069, pp. 710-712.
- T. Nakamura, “The Simulation Study of the Single Bunch Instabilities in the Spring-8 Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP104G, pp. 1102-1104.
- E.-S. Kim, “Design Considerations for SASE-FEL at PLS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB047, pp. 3111-3113.
- S. Henderson, “A Beamloss Diagnostic System for CESR”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P059, pp. 2029-2031.
- R. L. Geng, J. Knobloch, and H. Padamsee, “Micro-Structures of RF Surfaces in the Electron-Beam-Weld Regions of Niobium”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP021, pp. 238-245.
- R. L. Geng, “Multipacting Simulations for Superconducting Cavities and RF Coupler Waveguides”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPB002, pp. 264-268.
- A. Tsinganis, R. Bruce, F. Cerutti, and A. Lechner, “Impact on the HL-LHC Triplet Region and Experiments From Asynchronous Beam Dumps on Tertiary Collimators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 96-99.
- A. Meseck, M. Abo-Bakr, J. Bahrdt, and B. C. Kuske, “Source Characterization of BESSY Soft X-Ray FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP007, pp. XX-XX.
- E.-S. Kim, K.-M. Ha, S.-H. Nam, and J.-H. Seo, “Energy Ramping System in PLS Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO023, pp. 2025-2027.
- D. M. Li, Q. Gu, and Z. T. Zhao, “New Scheme of the SSRF Injector”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14018, pp. XX-XX.
- R. Maier, U. Pfister, and R. Theenhaus, “The COSY-Juelivh Project - May 1990 Status”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 131-134.
Back to search