Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. L. Smith et al., “COBRA Accelerator for Sandia ICF Diode Research at Cornell University”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE07, pp. 1204-1206.
[n] M. D. Williams et al., “Development of an RF Driven Plasma Cathode for Ion Sources”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W029, pp. 2767-2769.
[n] P. N. Prakash, A. Roy, and K. W. Shepard, “Quarter Wave Coaxial Line Cavity for New Delhi Linac Booster”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C25, pp. 633-639.
[n] A. V. Elzhov et al., “Features of FEM for Testing of High-gradient Accelerating Structures of Linear Colliders”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE112, pp. 2308-2310.
[n] W. Merz, R. Flood, E. J. Martin, and M. O'Sullivan, “Early Operating and Reliability Experience with the CEBAF DC Magnet Power Supplies”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPP13, pp. 1991-1993.
[n] Yu. A and N. Yu. Yazvitskii, “DESIGN AND TESTS OF A SUPERCONDUCTING MAGNET WITH A CRYOCOOLER FOR THE ION SOURCE DECRIS-SC”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP09, pp. XX-XX.
[n] P. Schardt et al., “Superconducting Billiard Cavities - a Non-Accelerator Application of RF Superconductivity”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I50, pp. XX-XX.
[n] C. Bonavolonta, F. Laviano, V. Palmieri, and M. Valentino, “Application of Flux Gate Magnetometry to Electropolishing”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP25, pp. 351-356.
[n] N. S. Ginzburg, A. M. Malkin, N. Yu. Peskov, R. M. Rozental, A. Sergeev, and V. Yu. Zaslavsky, “Mode Dynamics in the Bragg FEL Based on Coupling of Propagating and Trapped Waves”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP039, pp. XX-XX.
[n] L. Laska, “Feasibility of Short Wavelength, Short Pulse Laser Ion Source for the LHC Injector”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP44, pp. 166-168.
[n] M. J. Rhee, “Fully Stripped Ion Beams Produced by Pulse Powered Plasma Focus Device”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2663-2666.
[n] J. J. Burgerjon, Z. Gelbart, G. O. Hendry, J. C. Lofvendahl, L. McIlwraith, and G. A. Pinto, “A High-Power Target System for Radioisotope Production”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-11, pp. 634-637.
[n] C. Agritellis, R. Chasman, and Th. J. M. Sluyters, “Design of the Low - Energy Beam Transport System of the Brookhaven 200 - Me V Injector Linac”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 221-227.
[n] Th. J. M. Sluyters, “Brookhaven's Recent Pre-Accelerator Progress”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VII-05, pp. 383-389.
[n] R. Jameson, “Accelerator-Driven Transmutation Technology for Energy Production and Nuclear Waste Treatment”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 230-235.
[n] R. A. Gerber et al., “Light Ion Sources for ICF”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1718-1723.
[n] Th. J. M. Sluyters, “Recent Progress in Linac Pre-Accelerators”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper D-1, pp. 228-239.
[n] V. J. Kovarik and Th. J. M. Sluyters, “Discussion of H.V. Power Supply Units Connected with High Gradient Tubes in Linac Preinjectors”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper D-3, pp. 251-268.
[n] V. Variale et al., “The Charge State Breeder BRIC: Status Report”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO449, pp. 151-153.
[n] V. Palmieri, F. Stivanello, and M. Valentino, “Flux-Gate Magnetometry: The Possibility to Apply a Novel Tool to Monitor Niobium Chemistry”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP006, pp. 153-158.
[n] A. Elzhov et al., “New Scheme of Two Beam Accelerator Driver on Base on Linear Induction Accelerator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP29C, pp. 472-474.
[n] U. Bechstedt et al., “Magnets and Power Supplies for COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1132-1135.
[n] M. M. Ravindran and J. T. Truchard, “COTS Technology for High Energy Physics Instrumentation”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUVNB01, pp. 84-87.
[n] F. Eozenou, M. Bruchon, and J. Gantier, “Parameters Investigation for Niobium Electro-Polishing”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP71, pp. XX-XX.
[n] Y.-S. Cho, B.-H. Choi, J.-M. Han, and H.-J. Kwon, “High Power RF System for KOMAC RFQ”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE103, pp. 2302-2304.
[n] H. Dong, R. Flood, C. Hovater, and J. Musson, “A Dual Digital Signal Processor VME Board For Instrumentation And Control Applications”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP049, pp. XX-XX.
[n] G. Brautti, A. Boggia, A. Raino, N. Ceci, V. Valentino, and V. Variale, “Trapped Ion Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W012, pp. 2729-2731.
[n] B. B. Culwick and S. Yen, “Main Cycle Controls for the AGS Booster Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1481-1484.
[n] J. Ungrin, S. O. Schriber, and R. A. Vokes, “Post Coupler Studies for Alvarez Tanks to be Used for High Power or Variable Energy”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E12, pp. 183-186.
[n] O. A. Anderson et al., “Design of a 200mA DC H- Injector for an RFQ”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 289-292.
[n] A. Boggia, G. Brautti, A. P. Errico, A. Rain, V. Valentino, and V. Variale, “Study of a Trapped Ion Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP01B, pp. 1433-1435.
[n] V. K. Grishin, S. P. Likhachev, and N. N. Nasonov, “High Efficiency Compact Source of Monochromatic Tunable X-Ray Radiation on Base of Electron Accelerator with Moderate Particle Energy”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP148, pp. 2587-2589.
[n] A. V. Elzhov et al., “30 GHz Test Facility for Experimental Study of Accelerating Structure Damage due to the Pulse Heating”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE113, pp. 2311-2313.
For LaTeX
Use Complete Form
For BibTeX
References
- D. L. Smith et al., “COBRA Accelerator for Sandia ICF Diode Research at Cornell University”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE07, pp. 1204-1206.
- M. D. Williams et al., “Development of an RF Driven Plasma Cathode for Ion Sources”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W029, pp. 2767-2769.
- P. N. Prakash, A. Roy, and K. W. Shepard, “Quarter Wave Coaxial Line Cavity for New Delhi Linac Booster”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C25, pp. 633-639.
- A. V. Elzhov et al., “Features of FEM for Testing of High-gradient Accelerating Structures of Linear Colliders”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE112, pp. 2308-2310.
- W. Merz, R. Flood, E. J. Martin, and M. O'Sullivan, “Early Operating and Reliability Experience with the CEBAF DC Magnet Power Supplies”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPP13, pp. 1991-1993.
- Yu. A and N. Yu. Yazvitskii, “DESIGN AND TESTS OF A SUPERCONDUCTING MAGNET WITH A CRYOCOOLER FOR THE ION SOURCE DECRIS-SC”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUIP09, pp. XX-XX.
- P. Schardt et al., “Superconducting Billiard Cavities - a Non-Accelerator Application of RF Superconductivity”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I50, pp. XX-XX.
- C. Bonavolonta, F. Laviano, V. Palmieri, and M. Valentino, “Application of Flux Gate Magnetometry to Electropolishing”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP25, pp. 351-356.
- N. S. Ginzburg, A. M. Malkin, N. Yu. Peskov, R. M. Rozental, A. Sergeev, and V. Yu. Zaslavsky, “Mode Dynamics in the Bragg FEL Based on Coupling of Propagating and Trapped Waves”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP039, pp. XX-XX.
- L. Laska, “Feasibility of Short Wavelength, Short Pulse Laser Ion Source for the LHC Injector”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP44, pp. 166-168.
- M. J. Rhee, “Fully Stripped Ion Beams Produced by Pulse Powered Plasma Focus Device”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2663-2666.
- J. J. Burgerjon, Z. Gelbart, G. O. Hendry, J. C. Lofvendahl, L. McIlwraith, and G. A. Pinto, “A High-Power Target System for Radioisotope Production”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-11, pp. 634-637.
- C. Agritellis, R. Chasman, and Th. J. M. Sluyters, “Design of the Low - Energy Beam Transport System of the Brookhaven 200 - Me V Injector Linac”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 221-227.
- Th. J. M. Sluyters, “Brookhaven's Recent Pre-Accelerator Progress”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VII-05, pp. 383-389.
- R. Jameson, “Accelerator-Driven Transmutation Technology for Energy Production and Nuclear Waste Treatment”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 230-235.
- R. A. Gerber et al., “Light Ion Sources for ICF”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1718-1723.
- Th. J. M. Sluyters, “Recent Progress in Linac Pre-Accelerators”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper D-1, pp. 228-239.
- V. J. Kovarik and Th. J. M. Sluyters, “Discussion of H.V. Power Supply Units Connected with High Gradient Tubes in Linac Preinjectors”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper D-3, pp. 251-268.
- V. Variale et al., “The Charge State Breeder BRIC: Status Report”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO449, pp. 151-153.
- V. Palmieri, F. Stivanello, and M. Valentino, “Flux-Gate Magnetometry: The Possibility to Apply a Novel Tool to Monitor Niobium Chemistry”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP006, pp. 153-158.
- A. Elzhov et al., “New Scheme of Two Beam Accelerator Driver on Base on Linear Induction Accelerator”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP29C, pp. 472-474.
- U. Bechstedt et al., “Magnets and Power Supplies for COSY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1132-1135.
- M. M. Ravindran and J. T. Truchard, “COTS Technology for High Energy Physics Instrumentation”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUVNB01, pp. 84-87.
- F. Eozenou, M. Bruchon, and J. Gantier, “Parameters Investigation for Niobium Electro-Polishing”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP71, pp. XX-XX.
- Y.-S. Cho, B.-H. Choi, J.-M. Han, and H.-J. Kwon, “High Power RF System for KOMAC RFQ”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE103, pp. 2302-2304.
- H. Dong, R. Flood, C. Hovater, and J. Musson, “A Dual Digital Signal Processor VME Board For Instrumentation And Control Applications”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP049, pp. XX-XX.
- G. Brautti, A. Boggia, A. Raino, N. Ceci, V. Valentino, and V. Variale, “Trapped Ion Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W012, pp. 2729-2731.
- B. B. Culwick and S. Yen, “Main Cycle Controls for the AGS Booster Synchrotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1481-1484.
- J. Ungrin, S. O. Schriber, and R. A. Vokes, “Post Coupler Studies for Alvarez Tanks to be Used for High Power or Variable Energy”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper E12, pp. 183-186.
- O. A. Anderson et al., “Design of a 200mA DC H- Injector for an RFQ”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 289-292.
- A. Boggia, G. Brautti, A. P. Errico, A. Rain, V. Valentino, and V. Variale, “Study of a Trapped Ion Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP01B, pp. 1433-1435.
- V. K. Grishin, S. P. Likhachev, and N. N. Nasonov, “High Efficiency Compact Source of Monochromatic Tunable X-Ray Radiation on Base of Electron Accelerator with Moderate Particle Energy”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP148, pp. 2587-2589.
- A. V. Elzhov et al., “30 GHz Test Facility for Experimental Study of Accelerating Structure Damage due to the Pulse Heating”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE113, pp. 2311-2313.
Back to search