JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	G. Melin et al., “Electron Cyclotron Resonance Sources of Multicharged Ions:  State of the Art, Recent Developments and Prospects”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 117-120. 
[n]	J. Klabunde, P. Sp?ñdtke, A. A. Kolomiets, and S. G. Yaramishev, “Beam Dynamics Simulation in a Four-Rod RFQ”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-08, pp. 710-712. 
[n]	G. Lambert et al., “Seeding the FEL of the SCSS Phase 1 Facility with the 13th Laser Harmonic of a Ti: Sa Laser (61.5 nm) Produced in Xe Gas”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOOC004, pp. XX-XX. 
[n]	E. J. N. Wilson, “The Lattice of the SPS”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1458-1461. 
[n]	A. Sukhanov, J. P. Jamilkowski, and A. Marusic, “Interface Between EPICS and ADO”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 748-750. doi:10.18429/JACoW-ICALEPCS2017-TUPHA146
[n]	M. Hosaka, K. Chen, T. He, and W. Xu, “Comparison of BBA methods for commissioning of fourth generation light sources”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1369-1371. doi:10.18429/JACoW-IPAC2024-TUPG54
[n]	R. M. Brodhage, G. Clemente, L. Groening, H. Podlech, and U. Ratzinger, “Development And Measurements on a Coupled CH Proton Linac for FAIR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD031, pp. 750-752. 
[n]	T. Mooney, “synApps: EPICS-Application Software for Synchrotron Beamlines and Laboratories”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THCOMA02, pp. 106-108. 
[n]	M. Roehrs and C. Gerth, “Electron Beam Diagnostics with Transverse Deflecting Structures at the European X-Ray Free Electron Laser”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH049, pp. 90-93. 
[n]	A. Romanov et al., “Overview of the new beam physics research at the IOTA/FAST facility”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC28, unpublished. 
[n]	C. R. Chen, F. D. Chang, S.-P. Kao, R. J. Sheu, and J. P. Wang, “The Radiation Safety Interlock System for Top-Up Mode Operation at NSRRC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT055, pp. 3328-3330. 
[n]	S. P. Jamison et al., “Dielectric and THz Acceleration (Data) Programme at the Cockcroft Institute”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 62-64. doi:10.18429/JACoW-LINAC2016-MOOP09
[n]	D. Broemmelsiek and R. J. Pasquinelli, “Fermilab Recycler Stochastic Cooling Commissioning and Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB070, pp. 3431-3433. 
[n]	R. Zou, Z. Dong, Z. Wang, Y. Qin, and Y. Du, “Investigation of beam generation in laser back-illumination mode using metal cathodes of varying thickness in a photocathode DC electron gun”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR88, unpublished. 
[n]	S. Cunningham, R. Clarken, and A. C. Starritt, “A Compact Weather Station for Monitoring Environmental Effects on Beam Properties and Equipment”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 30-32. doi:10.18429/JACoW-IBIC2015-MOPB002
[n]	Q. Tura, C. Berthe, O. Danna, M. Faye, A. Savalle, and J. Suadeau, “Safety Control of the Spiral2 Radioactive Gas Storage System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1629-1633. doi:10.18429/JACoW-ICALEPCS2017-THPHA107
[n]	E. D. van Garderen et al., “Newly Installed Beam Diagnostics at the Australian Synchrotron”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD07, pp. 47-49. 
[n]	G. Velev, G. Ambrosio, G. Chlachidze, J. DiMarco, S. Stoynev, and T. Strauss, “Measurements of Decay and  Snapback in Nb?Sn Accelerator Magnets at Fermilab”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4342-4345. doi:10.18429/JACoW-IPAC2019-THPTS100
[n]	H. Hassanzadegan et al., “Design and Implementation of a Pulsed Digital LLRF System for the RAL Front End Test Stand”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA055, pp. 1458-1460. 
[n]	M. Fukuda et al., “Use of Microbeam at JAEA Takasaki”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THZH102, pp. 588-591. 
[n]	P. P. Schneider et al., “First Experiments at the CW-Operated RFQ for Intense Proton Beams”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 394-397. doi:10.18429/JACoW-LINAC2016-TUOP05
[n]	J. Rodríguez Pérez et al., “Optimization of a multichannel solid state plasma for laser wakefield acceleration with realistic laser parameters using a Bayesian algorithm”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS054, unpublished. 
[n]	Y. Yang et al., “Electropolishing of the ANL Deflecting Cavity for the APS Upgrade”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP055, pp. 544-546. 
[n]	E. Lecorche et al., “Overview of the GANIL Control Systems for the Different Projects Around the Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 406-410. doi:10.18429/JACoW-ICALEPCS2017-TUPHA016
[n]	O. Singh, S. Ramamoorthy, J. Sheehan, and J. Smith, “Upgrade of NSLS Timing System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA15, pp. 2223-2225. 
[n]	J. Tapia et al., “LAMP:  the LANSCE modernization project”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUAD1, unpublished. 
[n]	K. A. Brown et al., “Ion Coulomb Crystals in Storage Rings for Quantum Information Science”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3667-3670. doi:10.18429/JACoW-IPAC2021-WEPAB411
[n]	P. Belochitskii et al., “Beam Optics Issues for the Antiproton Decelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V011, pp. 1382-1384. 
[n]	M. Baltay et al., “The Ring Magnets for the SSRL SPEAR Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2369-2372. 
[n]	T. Ilg et al., “Mechanical Design of the Drift-Tube Linac (DTL) for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB051, pp. 2841-2843. 
[n]	G. Westenskow et al., “A Chopper Driven 11.4-GHz Traveling-Wave RF Generator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 646-649. 
[n]	L. L. Reginato and B. H. Smith, “Application of the Two-Power-Supply Method to the Ferrite Bias of an RF Resonator of a Rapid-Cycling Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 540-543. 
[n]	C. Ozkan Loch, R. Ischebeck, N. Samadi, A. M. M. Stampfli, and J. Vila Comamala, “SLS 2.0 ÔÇô Status of the Diagnostics”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 15-18. doi:10.18429/JACoW-IBIC2022-MOP01
[n]	Y. Chiba, K. Ohtomo, T. Rizawa, and M. Wakasugi, “Ferrite Evaluation Test for MUSES”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B13, pp. 1987-1989. 
[n]	C. Bourat et al., “Measurements on the ELETTRA 1.5 GeV Electron Linac Injector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 707-710. 
[n]	S. P. Antipov, S. V. Kuzikov, S. Stoupin, and A. A. Vikharev, “Detection of X-Rays and Charged Particles via Detuning of the Microwave Resonator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1958-1960. doi:10.18429/JACoW-IPAC2018-WEPAF058
[n]	M. Abliz, J. H. Grimmer, Y. Jaski, M. Ramanathan, and F. Westferro, “Clearing Magnet Design for APS-U”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1228-1230. doi:10.18429/JACoW-NAPAC2016-THPOA62
[n]	A. D. Palczewski, C. E. Reece, M. J. Kelley, and J. Tuggle, “Investigation of Nitrogen Absorption Rate and Nitride Growth on SRF Cavity Grade RRR Niobium as a Function of Furnace Temperature”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 744-747. doi:10.18429/JACoW-LINAC2016-THOP02
[n]	W. Kleeven, W. Beeckman, S. Lucas, S. Zaremba, D. Vandeplassche, and Y. Jongen, “Magnetic Field Calculation and Shimming of the Self-Extracting Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-27, pp. XX-XX. 
[n]	J. W. Davis, W. L. Gagnon, and B. H. Smith, “Experimental Studies of the Omnitron Electrical Components”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 250-257. 
[n]	K. L. F. Bane, C. Adolphsen, K. Kubo, and K. A. Thompson, “Issues in Multi-bunch Emittance Preservation in the NLC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1114-1117. 
[n]	C. S. Simon, F. Senee, G. Clemente, P. Forck, W. Kaufmann, and P. Kowina, “Design Status of Beam Position Monitors for the FAIR Proton Linac”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD24, pp. 356-358. 
[n]	P. Krzeminski et al., “IOT Amplifiers for FELs”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH067, pp. XX-XX. 
[n]	B. X. Yang, J. L. Bailey, S. J. Stein, and D. R. Walters, “Design of a High-Resolution Optical Transition Radiation Imager System for the Linac Coherent Light Source Undulator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT087, pp. 4209-4211. 
[n]	B. H. Smith, “High-Duty-Factor Conversion of the Berkeley Hilac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IX-04, pp. 467-470. 
[n]	J. H. Wei, N. Baboi, and L. Shi, “Stability Study of Beam Position Measurement Based on Higher Order Mode Signals at FLASH”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 273-277. doi:10.18429/JACoW-IBIC2018-TUPB07
[n]	H. O. Moser et al., “ANKA, A Synchrotron Light Source for Microstructure Fabrication and Analysis”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR06, pp. 272-274. 
[n]	Y. Jongen, M. Lacroix, M. Loiselet, A. Ninane, G. Ryckewaert, and S. Zaremba, “A Two-Cyclotron Concept for the Production of Radioactive Ion Beams”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1620-1623. 
[n]	M. Di Giacomo, A. Orduz, B. Jacquot, C. Barthe-Dejean, and S. Leloir, “Upgrade of the medium energy dump geometry for the SPIRAL2 single bunch selector”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4409-4411. doi:10.18429/JACoW-IPAC2023-THPA190
[n]	W. K. Lau et al., “Development of a High Brightness Photo-Injector for Light Source Research at NSRRC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC071, pp. 229-231. 
[n]	J. F. Tooker et al., “System Engineering in the SSC Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-12, pp. 326-328. 
[n]	K. A. Brown and D. M. Gassner, “Crystalline Chromium Doped Aluminium Oxide (Ruby) Use as a Luminescent Screen for Proton Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA105, pp. 2123-2124. 
[n]	U. Wienands et al., “Dither Coils for the SuperKEKB Fast Collision Feedback System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3500-3502. doi:10.18429/JACoW-IPAC2015-WEPWI006
[n]	T. Satogata, J. Cardona, V. Ptitsyn, S. Tepikian, and J. van Zeijts, “Linear Optics during the RHIC 2001-2 Run”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE049, pp. 1187-1189. 
[n]	S. M. Gierman et al., “Operating a Tungsten Dispenser Cathode in Photo-Emission Mode”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP088, pp. 575-576. 
[n]	R. J. Roussel et al., “Transformer Ratio Measurements from Ramped Beams in the Plasma Blowout Regime using Emittance Exchange”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3778-3781. doi:10.18429/JACoW-IPAC2019-THPGW088
[n]	S. R. Smith et al., “LCLS Cavity Beam Position Monitors”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUOC03, pp. 285-287. 
[n]	S. Lenci, H. Bohlen, A. Mizuhara, B. Stockwell, and E. Wright, “Recent Progress in CW Klystrons at CPI”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE118, pp. 2326-2328. 
[n]	D. G. Li et al., “SASE FEL at SDUV-FEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPA02, pp. 362-365. 
[n]	M. G. Mazarakis et al., “Acceleration, Ion Focusing (IFR) and Transport Experiments with Recirculating Linear Accelerator (RLA)”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-03, pp. 299-301. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search