Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Bignami, N. Gazis, and E. Trachanas, “Non-Destructive Testing and Mechanical Measurements at the European Spallation Source”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA188, unpublished.
[n] Y. J. Lee, “Proton beam power limits for stationary water-cooled tungsten target with different cladding materials”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3841-3844. doi:10.18429/JACoW-IPAC2024-THPS45
[n] A. Nassiri, A. Grelick, R. L. Kustom, and M. White, “High Peak Power Test of S-Band Waveguide Switches”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P048, pp. 3174-3176.
[n] D. Einfeld and R. Richter, “The ELETTRA Linac to Storage Ring Transfer Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 887-890.
[n] E. Trachanas, A. Bignami, N. Gazis, and B. Jones, “ESS RFQ Experimental Modal Analysis”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2907-2910. doi:10.18429/JACoW-IPAC2022-THPOTK057
[n] J. Norem, C.-X. Wang, and N. Solomey, “Instrumentation for the Muon Based Neutrino Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB003, pp. 522-524.
[n] A. E. Grelick et al., “Testing and Operation of The WR340 Waveguide Window in The APS Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH450, pp. 713-715.
[n] M. Tobiyama, T. Kasuga, T. Katsura, T. Obina, and T. Takeo, “Measurement of Bunch Time-Structure in KEK PF”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1338-1341.
[n] T. Katsura, K. Haga, Y. Kamlya, and T. Mitsuhashi, “A Beam Position Feedback System for Beam Lines at the Photon Factory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 538-541.
[n] F. Mayet, R. W. Assmann, S. Schreiber, and M. Vogt, “Implementation of a Diagnostic Pulse for Beam Optics Stability Measurements at FLASH”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 850-853. doi:10.18429/JACoW-IPAC2015-MOPHA031
[n] A. Liu, J. P. Biswas, J. R. Callahan, M. Gaowei, and S. Poddar, “Encapsulation of Photocathodes Using High Power Pulsed RF Sputtering of hBN”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 760-763. doi:10.18429/JACoW-NAPAC2022-WEPA56
[n] R. Ursic et al., “Beam Position Monitoring Using Intelligent Front-Ends and High Speed Interconnect Technologies”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE614, pp. XX-XX.
[n] V. A. Shkaruba et al., “Status of Development of Superconducting Insertion Devices for Generation of Synchrotron Radiation at Budker INP”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 94-99. doi:10.18429/JACoW-RUPAC2018-THXMH01
[n] F. Mayet, R. W. Assmann, U. Dorda, and W. Kuropka, “First Order Sensitivity Analysis of Electron Acceleration in Dual Grating Type Dielectric Laser Accelerator Structures”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1626-1629. doi:10.18429/JACoW-IPAC2018-TUPML039
[n] M. Ruprecht et al., “Analysis of Coupled Bunch Instabilities in BESSY-VSR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1659-1661. doi:10.18429/JACoW-IPAC2014-TUPRI043
[n] Ch. Borgmann, M. Jacewicz, J. Oegren, M. Olvegaard, J. M. Y. Ruber, and V. G. Ziemann, “The Momentum Distribution of the Decelerated Drive Beam in CLIC and in the Two-beam Test Stand at CTF3”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 62-64. doi:10.18429/JACoW-IPAC2014-MOPRO002
[n] T. Mitsuhashi, K. Haga, and T. Katsura, “Construction of a Synchrotron Radiation (SR) Position Monitor by Means of X -Ray Photoemission”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 576-579.
[n] E. J. Montgomery, J. E. Butler, C. Jing, S. Poddar, and S. Zhang, “Black Gun Technologies for DC Photoinjectors”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 247-248. doi:10.18429/JACoW-NAPAC2019-MOPLO06
[n] N. A. Mezentsev, S. V. Khrushchev, V. A. Shkaruba, V. M. Syrovatin, and V. M. Tsukanov, “Planar Superconducting Undulator With Neutral Poles”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 21-23. doi:10.18429/JACoW-RUPAC2016-TUCAMH01
[n] C. Figley, “Electrical Performance of the Injection System Kickers at the Saskatchewan Accelerator Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 869-872.
[n] J. Bahrdt, K. Holldack, P. Kuske, R. Mueller, M. Scheer, and P. O. Schmid, “Undulator Photon Beams with Orbital Angular Momentum”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 213-215. doi:10.18429/JACoW-IPAC2014-MOPRO057
[n] V. Yakimenko et al., “FACET-II Accelerator Research with Beams of Extreme Intensities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1067-1070. doi:10.18429/JACoW-IPAC2016-TUOBB02
[n] M. Dehler, A. Jaggi, V. Schlott, and R. Ursic, “Electron Beam Diagnostics for the Swiss Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP41C, pp. 1592-1594.
[n] B. T. Freemire et al., “High Power Test of a Dielectric Disk Loaded Accelerator for a Two Beam Wakefield Accelerator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1096-1099. doi:10.18429/JACoW-IPAC2021-MOPAB352
[n] N. A. Mezentsev, S. V. Khrushchev, V. K. Lev, V. A. Shkaruba, V. M. Syrovatin, and V. M. Tsukanov, “Superconducting Multipole Wigglers: State of the Art”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4103-4106. doi:10.18429/JACoW-IPAC2014-WEPRI091
[n] K. Fransson, K. J. Gajewski, M. Jacewicz, M. Jobs, J. M. Y. Ruber, and V. G. Ziemann, “The EPICS Based Control System at the FREIA Laboratory”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1890-1892. doi:10.18429/JACoW-IPAC2017-TUPIK084
[n] A. H. Lumpkin and J. Ruan, “Initial Synchroscan Streak Camera Imaging at the A0 Photoinjector”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF062, pp. 258-262.
[n] A. Bignami, N. Gazis, S. Ghatnekar Nilsson, and B. Nicquevert, “Analysis with MECAmaster on the Chain of Design Tolerances for the Target Systems at the European Spallation Source - ESS”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2524-2526. doi:10.18429/JACoW-IPAC2022-THPOST037
[n] A. Ijspeert, M. Karppinen, and S. Russenschuck, “Automated Design of a Correction Dipole Magnet for LHC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP025G, pp. 1250-1252.
[n] A. V. Bondarenko and A. N. Matveenko, “Emittance Compensation Scheme for the BERLinPro Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO028, pp. 1497-1499.
[n] Frank Stocker, Howard Fenker, Ron Schailey, “Test and Calibration Beams at the Superconducting Super Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 890-893.
[n] P. Kuske, “CSR-driven Longitudinal Single Bunch Instability Thresholds”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEOAB102, pp. 2041-2043.
[n] K. Dobashi et al., “Development of Compact Hard X-ray Source Based on Laser-Electron Collision using X-band Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI104, pp. 677-679.
[n] A. Nassiri and A. Grelick, “A Fifth Harmonic RF Bunch Monitor for the ANL-APS Electron Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2412-2415.
[n] M. Delrieux et al., “Production of slow extracted beams for CERN's East Area at the Proton Synchrotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 275-278. doi:10.18429/JACoW-IPAC2023-MOPA099
For LaTeX
Use Complete Form
For BibTeX
References
- A. Bignami, N. Gazis, and E. Trachanas, “Non-Destructive Testing and Mechanical Measurements at the European Spallation Source”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA188, unpublished.
- Y. J. Lee, “Proton beam power limits for stationary water-cooled tungsten target with different cladding materials”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS45, pp. 3841-3844.
- A. Nassiri, A. Grelick, R. L. Kustom, and M. White, “High Peak Power Test of S-Band Waveguide Switches”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P048, pp. 3174-3176.
- D. Einfeld and R. Richter, “The ELETTRA Linac to Storage Ring Transfer Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 887-890.
- E. Trachanas, A. Bignami, N. Gazis, and B. Jones, “ESS RFQ Experimental Modal Analysis”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2907-2910.
- J. Norem, C.-X. Wang, and N. Solomey, “Instrumentation for the Muon Based Neutrino Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB003, pp. 522-524.
- A. E. Grelick et al., “Testing and Operation of The WR340 Waveguide Window in The APS Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH450, pp. 713-715.
- M. Tobiyama, T. Kasuga, T. Katsura, T. Obina, and T. Takeo, “Measurement of Bunch Time-Structure in KEK PF”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1338-1341.
- T. Katsura, K. Haga, Y. Kamlya, and T. Mitsuhashi, “A Beam Position Feedback System for Beam Lines at the Photon Factory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 538-541.
- F. Mayet, R. W. Assmann, S. Schreiber, and M. Vogt, “Implementation of a Diagnostic Pulse for Beam Optics Stability Measurements at FLASH”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 850-853.
- A. Liu, J. P. Biswas, J. R. Callahan, M. Gaowei, and S. Poddar, “Encapsulation of Photocathodes Using High Power Pulsed RF Sputtering of hBN”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 760-763.
- R. Ursic et al., “Beam Position Monitoring Using Intelligent Front-Ends and High Speed Interconnect Technologies”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE614, pp. XX-XX.
- V. A. Shkaruba et al., “Status of Development of Superconducting Insertion Devices for Generation of Synchrotron Radiation at Budker INP”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 94-99.
- F. Mayet, R. W. Assmann, U. Dorda, and W. Kuropka, “First Order Sensitivity Analysis of Electron Acceleration in Dual Grating Type Dielectric Laser Accelerator Structures”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1626-1629.
- M. Ruprecht et al., “Analysis of Coupled Bunch Instabilities in BESSY-VSR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1659-1661.
- Ch. Borgmann, M. Jacewicz, J. Oegren, M. Olvegaard, J. M. Y. Ruber, and V. G. Ziemann, “The Momentum Distribution of the Decelerated Drive Beam in CLIC and in the Two-beam Test Stand at CTF3”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 62-64.
- T. Mitsuhashi, K. Haga, and T. Katsura, “Construction of a Synchrotron Radiation (SR) Position Monitor by Means of X -Ray Photoemission”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 576-579.
- E. J. Montgomery, J. E. Butler, C. Jing, S. Poddar, and S. Zhang, “Black Gun Technologies for DC Photoinjectors”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 247-248.
- N. A. Mezentsev, S. V. Khrushchev, V. A. Shkaruba, V. M. Syrovatin, and V. M. Tsukanov, “Planar Superconducting Undulator With Neutral Poles”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 21-23.
- C. Figley, “Electrical Performance of the Injection System Kickers at the Saskatchewan Accelerator Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 869-872.
- J. Bahrdt, K. Holldack, P. Kuske, R. Mueller, M. Scheer, and P. O. Schmid, “Undulator Photon Beams with Orbital Angular Momentum”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 213-215.
- V. Yakimenko et al., “FACET-II Accelerator Research with Beams of Extreme Intensities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1067-1070.
- M. Dehler, A. Jaggi, V. Schlott, and R. Ursic, “Electron Beam Diagnostics for the Swiss Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP41C, pp. 1592-1594.
- B. T. Freemire et al., “High Power Test of a Dielectric Disk Loaded Accelerator for a Two Beam Wakefield Accelerator”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1096-1099.
- N. A. Mezentsev, S. V. Khrushchev, V. K. Lev, V. A. Shkaruba, V. M. Syrovatin, and V. M. Tsukanov, “Superconducting Multipole Wigglers: State of the Art”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4103-4106.
- K. Fransson, K. J. Gajewski, M. Jacewicz, M. Jobs, J. M. Y. Ruber, and V. G. Ziemann, “The EPICS Based Control System at the FREIA Laboratory”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1890-1892.
- A. H. Lumpkin and J. Ruan, “Initial Synchroscan Streak Camera Imaging at the A0 Photoinjector”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF062, pp. 258-262.
- A. Bignami, N. Gazis, S. Ghatnekar Nilsson, and B. Nicquevert, “Analysis with MECAmaster on the Chain of Design Tolerances for the Target Systems at the European Spallation Source - ESS”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2524-2526.
- A. Ijspeert, M. Karppinen, and S. Russenschuck, “Automated Design of a Correction Dipole Magnet for LHC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP025G, pp. 1250-1252.
- A. V. Bondarenko and A. N. Matveenko, “Emittance Compensation Scheme for the BERLinPro Injector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPO028, pp. 1497-1499.
- Frank Stocker, Howard Fenker, Ron Schailey, “Test and Calibration Beams at the Superconducting Super Collider”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 890-893.
- P. Kuske, “CSR-driven Longitudinal Single Bunch Instability Thresholds”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEOAB102, pp. 2041-2043.
- K. Dobashi et al., “Development of Compact Hard X-ray Source Based on Laser-Electron Collision using X-band Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI104, pp. 677-679.
- A. Nassiri and A. Grelick, “A Fifth Harmonic RF Bunch Monitor for the ANL-APS Electron Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2412-2415.
- M. Delrieux et al., “Production of slow extracted beams for CERN's East Area at the Proton Synchrotron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA099, pp. 275-278.
Back to search