JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	P. Nenzi et al., “Development of a Passive Cavity Beam Intensity Monitor for Pulsed Proton Beams for Medical Applications”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 41-44. doi:10.18429/JACoW-IBIC2019-MOCO02
[n]	M. H. Rashid, C. Mallik And R, and K. Bhandari, “Simulated New Cusp Field Created By Permanent Magnet For An 18 Ghz Ecris”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 286-288. 
[n]	J. Ohnishi, Y. Higurashi, and T. Nakagawa, “Practical Use of High-Temperature Oven for 28 GHz Superconducting  ECR Ion Source at RIKEN”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 180-184. doi:10.18429/JACoW-ECRIS2018-WEB4
[n]	T. Ohkawa, M. Ikegami, and J. Qiang, “Present Status of the L3BT for J-PARC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS109, pp. 1756-1758. 
[n]	C. J. Bocchetta et al., “The Design of the ELETTRA Fast Local Feedback System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P050, pp. 2353-2355. 
[n]	X. L. Jiang and S. C. Jiang, “Propagation of Intense Pulsed Electron Beams with Energies Below 80-keV”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2492-2495. 
[n]	D. Halis et al., “Diagnostic Station of Proton Beam at KAHVELab (PTAK)”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper WEP18, unpublished. 
[n]	P. M. Lapostolle, “Possible Emittance Increase through Fillamentation due to Space Charge in Continuous Beams”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1101-1105. 
[n]	A. Ratti et al., “Conceptual Design of the SNS RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4090, pp. 276-278. 
[n]	S. Haghtalab, F. Abbasi, S. Ahmadiannamin, F. Ghasemi, and M. Lamehi, “Current Status of IPM Linac Control System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1418-1420. doi:10.18429/JACoW-IPAC2017-TUPAB042
[n]	Z. Zhao, H. Ding, and H. Xu, “Status of the Shanghai Synchrotron Radiation Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WOAB002, pp. 214-216. 
[n]	P. Duval, U. R. Ristau, and H. Wu, “The TINE Common Device Interface in Operation”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ01, pp. 154-156. 
[n]	M. Giovannozzi and R. Cappi, “Adiabatic Capture of Charged Particles in Islands of Phase Space: A New Method for Multi-turn Extraction”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE047, pp. 1250-1252. 
[n]	A. Romanenko, G. V. Eremeev, H. Padamsee, and J. B. Shu, “Comparative Surface Studies on Fine-grain and Single Crystal Niobium Using XPS, AES, EBSD and Profilometry”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS011, pp. 2349-2351. 
[n]	R. Schneider and J. Rainwater, “Nevis Synchrocyclotron Conversion Program - RF Syaytem”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 430-434. 
[n]	N. J. Walker, M. Woodley, and J. Irwin, “Analysis of Higher Order Optical  Abberations in the SLC Final Focus Using Lie Algebra Techniques”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 119-122. 
[n]	R. J. Adler and R. J. Richter-Sand, “Advances in the Development of the Nested High Voltage Generator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1306-1309. 
[n]	A. A. Bulavskaya, A. V. Batranin, Yu. M. Cherepennikov, A. A. Grigorieva, I. A. Miloichikova, and S. Stuchebrov, “Determination of Optimal Number of Beam Projections for Scanning Beam Profile Detector Development”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC38, unpublished. 
[n]	B. Keil et al., “First Beam Commissioning Experience With The SwissFEL Cavity BPM System”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 251-254. doi:10.18429/JACoW-IBIC2017-TUPCF17
[n]	V. Paramonov, “The Cut Disk Accelerating Structure for High Energy Linacs”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P025, pp. 2962-2964. 
[n]	M. Woodley, F.-J. Decker, R. Erickson, M. B. Woods, P. Bosted, and M. Libby, “Beam Stabilization in the SLAC A-line Using a Skew Quadrupole”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE005, pp. 1208-1210. 
[n]	N. R. Kurita, R. M. Boyce, E. F. Daly, B. D. Scott, and T. A. Trautwein, “Overview of the SPEAR3 Vacuum System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA123, pp. 1363-1365. 
[n]	C. Scafuri, “The FERMI@Elettra Online Modeling Toolkit”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP037, pp. 170-172. 
[n]	Y.-S. Cho et al., “Development of PEFP 20 MeV Proton Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS051, pp. 1609-1611. 
[n]	A. Rai, D. Kanjilal, K. K. Mistri, P. Patra, P. N. Potukuchi, and S. K. Sonti, “Investigation of High Temperature Baking of Jacketed Quarter Wave Resonators”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 598-601. doi:10.18429/JACoW-SRF2017-TUPB090
[n]	S. Assadi, I. Kourbanis, D. McGinnis, and J. Steimel, “Observation and Cure of Longitudinal Coupled-Bunch Instabilities in the Fermilab Main Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P058, pp. 2323-2325. 
[n]	R. L. Gluckstern and R. F. Holsinger, “REC Quadrupoles and Dipoles with Circular and Elliptical Cross Sections”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3623-3627. 
[n]	M. Cargnelutti et al., “S-Band Cavity BPM Readout Electronics for the ELI-NP Gamma Beam Source”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 243-246. doi:10.18429/JACoW-IBIC2017-TUPCF15
[n]	A. Benton, C. Agritellis, and R. Chasman, “Computer Calculations of Effect of Space Charge on Longitudinal Beam Dynamics in Proton Linear Accelerators”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 577-581. 
[n]	R. Cohen and J. Rainwater, “Axial Electric Focusing in a Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 426-430. 
[n]	A. C. Paul, G. A. Westenskow, L. R. Bertolini, and P. T. Duffy, “The Mechanical Design for the DARHT-II Downstream Beam Transport Line”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB16, pp. 473-478. 
[n]	G. Tortone et al., “uSOP: An Embedded Linux Board for the Belle2 Detector Controls”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1003-1006. doi:10.18429/JACoW-ICALEPCS2017-TUSH302
[n]	E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “Coherent Radiation of an Electron Bunch Moving in an Arc of a Circle”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5V027, pp. 1658-1660. 
[n]	B. G. Pine, S. J. Payne, and C. M. Warsop, “Modelling of Diagnostics for Space Charge Studies on the ISIS Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH036, pp. 1082-1084. 
[n]	Th. Sluyters and V. Kovarik, “Properties of H- and D- Beams from Magnetron and Penning Sources”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-4, pp. 428-431. 
[n]	E. Allaria, M. B. Danailov, W. M. Fawley, E. Ferrari, and L. Giannessi, “Measurements of the FEL-bandwidth Scaling with Harmonic Number in a HGHG FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP077, pp. 227-230. 
[n]	R. Dusad and G. Travish, “Use of Re-Acceleration and Tapering in High Gain Free Electron Lasers to Enhance Power and Energy Extraction”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPC09, pp. 115-117. 
[n]	K. B. Scheidt, “Newly Developed 6mm Buttons for the BPMs in the ESRF Low-Emittance-Ring”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF14, pp. 346-350. 
[n]	J. P. Delahaye, “An Injector Complex for the Main Beams of the CERN Linear Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 677-680. 
[n]	A. J. Gee and B. Erdelyi, “Study and Comparison of the Method of Moments and the Single Level Fast Multipole Method for 2D Space Charge Tracking”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA15, pp. 207-209. 
[n]	J. T. Seeman, “PEP II Status and Plans”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPG03, pp. 486-490. 
[n]	J.-Y. Raguin, S. Doebert, I. Syratchev, and W. Wuensch, “Coupler Studies for CLIC Accelerating Structures”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE097, pp. 2187-2189. 
[n]	C. M. Gulliford, A. C. Bartnik, J. S. Berg, J. Dobbins, A. Nunez-delPrado, and D. Sagan, “Experience With CBETA Online Modeling Tools”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 196-201. doi:10.18429/JACoW-ICAP2018-TUPAF10
[n]	N. Holtkamp, “The SNS Linac and Storage Ring: Challenges and Progress Towards Meeting Them”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUZGB002, pp. 164-168. 
[n]	E. L. Saldin, E. A. Schneidmiller, and M. V. Yurkov, “The Potential for Extending the Spectral Range Accessible to the European X-ray Free Electron Laser in the Direction of Longer Wavelengths”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS17, pp. XX-XX. 
[n]	W.-K. Lau, L. H. Chang, Ch. E. Wang, and M.-S. Yeh, “Analysis of the Superconducting RF Cavity under Heavy Beam Loading at Taiwan Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE017, pp. 1529-1531. 
[n]	T. Batten, “Closing of IBIC 2023”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper TH2I05, unpublished. 
[n]	R. J. Briggs, “A Collective Accelerator for Electron Colliders”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3489-3492. 
[n]	P. A. McIntosh et al., “PEP-II RF System Operation and Performance”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF062, pp. 1087-1089. 
[n]	F. Falkenstern, J. Kuszynski, and G. Rehm, “Booster Fillpattern Monitor”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 473-475. doi:10.18429/JACoW-IBIC2022-WEP31

For LaTeX

Use Complete Form

For BibTeX

References

Back to search