Favourites
For Word
[n] G. I. Bell et al., “Simulations of Diamond Detectors with Schottky Contacts”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 617-619. doi:10.18429/JACoW-IPAC2015-MOPMA031
[n] C. M. Bhat et al., “The Main Injector Chromaticity Correction Sextupole Magnets: Measurements and Operating Schemes”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP05, pp. 1334-1336.
[n] R. J. Barlow, R. Appleby, J. Molson, H. L. Owen, and A. M. Toader, “Simulations of the LHC Collimation System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD061, pp. 2066-2068.
[n] D. C. Plostinar, C. R. Prior, and G. H. Rees, “Conceptual Design of a New 800 MeV H- Linac for ISIS Megawatt Developments”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC041, pp. 2100-2102.
[n] M. Lindroos, H. Danared, R. Garoby, D. P. McGinnis, and E. Tanke, “Status of the ESS Accelerator Construction Project”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3870-3872. doi:10.18429/JACoW-IPAC2015-THPF080
[n] J. Bojowald et al., “Diagnostic Tools for the COSY-Juelich Synchrotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1515-1518.
[n] W. B. Fowler, D. Drickey, P. J. Reardon, B. P. Strauss, and D. F. Sutter, “The Fermilab Energy Doubler, A Two-Year Progress Report”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1125-1129.
[n] C. L. Olson, J. P. Anthes, C. A. Frost, E. L. Patterson, and J. W. Poukey, “IFA-2 Collective Ion Accelerator Experiments”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3530-3533.
[n] B. Autin et al., “Performance of the CERN Antiproton Accumulator Complex”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 392-395.
[n] M. Zambelli et al., “Characterization of Pure Permanent Magnet Blocks for Undulators in 4th-Generation Light Sources”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC14, pp. 265-268.
[n] S. Verd??-Andr?®s, R. Calaga, E. Cano-Pleite, R. Leuxe, and J. A. Mitchell, “Design of LHC Crab Cavities Based on DQW Cryomodule Test Experience”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 925-928. doi:10.18429/JACoW-SRF2019-THP035
[n] P. Maccioni and J. L. Boutes, “Superconducting Cavities Manufacturing at CERCA”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D31, pp. 1090-1093.
[n] F. Krebs, “Measurement of Storage Ring Motion at the Advanced Light Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6V011, pp. 793-795.
[n] D. N. Smithe, D. Karipides, P. Stoltz, G. Cheng, and H. Wang, “Integrated EM & Thermal Simulations with Upgraded VORPAL Software”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOCS4, pp. 1463-1465.
[n] N. V. Kulabukhova, S. N. Andrianov, A. Bogdanov, and A. Degtyarev, “Simulation of Space Charge Dynamics on HPC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1609-1611. doi:10.18429/JACoW-IPAC2014-TUPRI024
[n] S. Calatroni, “20 Years of Experience with the Nb/Cu Technology for Superconducting Cavities and Perspectives for Future Developments”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOP11, pp. 149-154.
[n] A. C. Kolb, “A Tribute to Lev Artsimovich”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1035-1036.
[n] A. N. Ivanov and N. V. Kulabukhova, “An IDE for Spin-orbit Dynamics Simulation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO019, pp. 921-923.
[n] T. Koevener, D. K??chler, and V. Toivanen, “Study of the Lead Evaporation from the Oven of the GTS-LHC Ion Source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 131-135. doi:10.18429/JACoW-ECRIS2018-TUP21
[n] J. C. Smith, L. Keller, S. A. Lundgren, T. W. Markiewicz, and A. Young, “BPM Design and Impedance Considerations for a Rotatable Collimator for the LHC Collimation Upgrade”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB079, pp. 1704-1706.
[n] R. Calaga and E. Jensen, “A Proposal for an ERL Test Facility at CERN”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO049, pp. 2414-2416.
[n] J. Esberg, R. Apsimon, A. Latina, and D. Schulte, “Effect of CSR Shielding in the Compact Linear Collider”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1337-1339. doi:10.18429/JACoW-IPAC2014-TUPME003
[n] V. Andreev, N. N. Alexeev, A. I. Balabin, M. M. Kats, and A. A. Metreveli, “Upgrade of Heavy Ion Injector for ITEP-TWAC Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3283-3285. doi:10.18429/JACoW-IPAC2014-THPME029
[n] A. P. Sabersky, “Fast Beam Monitor Using Synchrotron Light”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 939-941.
For LaTeX
Use Complete Form
For BibTeX
References
- G. I. Bell et al., “Simulations of Diamond Detectors with Schottky Contacts”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 617-619.
- C. M. Bhat et al., “The Main Injector Chromaticity Correction Sextupole Magnets: Measurements and Operating Schemes”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP05, pp. 1334-1336.
- R. J. Barlow, R. Appleby, J. Molson, H. L. Owen, and A. M. Toader, “Simulations of the LHC Collimation System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD061, pp. 2066-2068.
- D. C. Plostinar, C. R. Prior, and G. H. Rees, “Conceptual Design of a New 800 MeV H- Linac for ISIS Megawatt Developments”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC041, pp. 2100-2102.
- M. Lindroos, H. Danared, R. Garoby, D. P. McGinnis, and E. Tanke, “Status of the ESS Accelerator Construction Project”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3870-3872.
- J. Bojowald et al., “Diagnostic Tools for the COSY-Juelich Synchrotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1515-1518.
- W. B. Fowler, D. Drickey, P. J. Reardon, B. P. Strauss, and D. F. Sutter, “The Fermilab Energy Doubler, A Two-Year Progress Report”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1125-1129.
- C. L. Olson, J. P. Anthes, C. A. Frost, E. L. Patterson, and J. W. Poukey, “IFA-2 Collective Ion Accelerator Experiments”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3530-3533.
- B. Autin et al., “Performance of the CERN Antiproton Accumulator Complex”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 392-395.
- M. Zambelli et al., “Characterization of Pure Permanent Magnet Blocks for Undulators in 4th-Generation Light Sources”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC14, pp. 265-268.
- S. Verd??-Andr?®s, R. Calaga, E. Cano-Pleite, R. Leuxe, and J. A. Mitchell, “Design of LHC Crab Cavities Based on DQW Cryomodule Test Experience”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 925-928.
- P. Maccioni and J. L. Boutes, “Superconducting Cavities Manufacturing at CERCA”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D31, pp. 1090-1093.
- F. Krebs, “Measurement of Storage Ring Motion at the Advanced Light Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6V011, pp. 793-795.
- D. N. Smithe, D. Karipides, P. Stoltz, G. Cheng, and H. Wang, “Integrated EM & Thermal Simulations with Upgraded VORPAL Software”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOCS4, pp. 1463-1465.
- N. V. Kulabukhova, S. N. Andrianov, A. Bogdanov, and A. Degtyarev, “Simulation of Space Charge Dynamics on HPC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1609-1611.
- S. Calatroni, “20 Years of Experience with the Nb/Cu Technology for Superconducting Cavities and Perspectives for Future Developments”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOP11, pp. 149-154.
- A. C. Kolb, “A Tribute to Lev Artsimovich”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 1035-1036.
- A. N. Ivanov and N. V. Kulabukhova, “An IDE for Spin-orbit Dynamics Simulation”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO019, pp. 921-923.
- T. Koevener, D. K??chler, and V. Toivanen, “Study of the Lead Evaporation from the Oven of the GTS-LHC Ion Source”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 131-135.
- J. C. Smith, L. Keller, S. A. Lundgren, T. W. Markiewicz, and A. Young, “BPM Design and Impedance Considerations for a Rotatable Collimator for the LHC Collimation Upgrade”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB079, pp. 1704-1706.
- R. Calaga and E. Jensen, “A Proposal for an ERL Test Facility at CERN”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO049, pp. 2414-2416.
- J. Esberg, R. Apsimon, A. Latina, and D. Schulte, “Effect of CSR Shielding in the Compact Linear Collider”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1337-1339.
- V. Andreev, N. N. Alexeev, A. I. Balabin, M. M. Kats, and A. A. Metreveli, “Upgrade of Heavy Ion Injector for ITEP-TWAC Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3283-3285.
- A. P. Sabersky, “Fast Beam Monitor Using Synchrotron Light”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 939-941.
Back to search