Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Schempp et al., “Performance of the DESY RFQs”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-14, pp. 73-75.
[n] Y. Li, Z. P. Li, W. B. Liu, and J. Peng, “XAL Applications Development for CSNS Transport Lines”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 98-100. doi:10.18429/JACoW-HB2016-MOPR018
[n] Y. Adachi et al., “In-House Cyclotron and Radioisotopes Production System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-07, pp. 622-625.
[n] S. Cohen and S. R. Babel, “Digital Control Interface for Bipolar Corrector Power Supplies for LCLS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN112, pp. 428-430.
[n] M. Brandin et al., “Status of the Undulator System of the Seeded HGHG-FEL Test Bench at MAX-lab”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH050, pp. 122-125.
[n] C. T. Rogers and M. A. Cummings, “Characterisation of Cooling in the Muon Ionization Cooling Experiment”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1976-1978. doi:10.18429/JACoW-IPAC2022-WEPOPT053
[n] K. Kümpel, H. Hoeltermann, H. Podlech, J. Storch, S. Altürk, and U. Ratzinger, “The LOEWE-3 RFQ project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3485-3487. doi:10.18429/JACoW-IPAC2024-THPR05
[n] P. Braun, H. Podlech, J. Storch, K. Kümpel, and P. Mueller, “Preparation for the conditioning of the MYRRHA CH-Cavities at IAP”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3491-3493. doi:10.18429/JACoW-IPAC2024-THPR07
[n] D. A. Goldberg and R. A. Rimmer, “Measurement and Identification of HOMs in RF Cavities”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P039, pp. 3001-3003.
[n] M. Uesaka et al., “Applications of X-band 950 keV and 3.95 MeV Linac X-ray Source for On-site Inspection”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR043, pp. 4071-4073.
[n] U. Amaldi, “The Importance of Particle Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOXE01, pp. 3-7.
[n] W. Lou, C. Mayes, and Y. Cai, “Two Dimensional Transient CSR Simulation in Julia”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA001, unpublished.
[n] S. M. Polozov, I. A. Ashanin, Yu. D. Kliuchevskaia, M. V. Lalayan, A. I. Pronikov, and V. I. Rashchikov, “Beam Dynamics Simulation Results in the 6 GeV Top-Up Injection Linac of the 4th Generation Light Source USSR”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 285-288. doi:10.18429/JACoW-RUPAC2018-WEPSB05
[n] J. Resta-L??pez, J. R. Hunt, and C. P. Welsch, “Intra-beam Scattering Effects in ELENA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2458-2461. doi:10.18429/JACoW-IPAC2015-WEAB3
[n] U. Amaldi et al., “LIBO - A 3 GHz Proton Linac Booster of 200 MeV for Cancer Treatment”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4098, pp. 633-635.
[n] O. Bezditko, I. M. Karnaukhov, A. Mytsykov, D. V. Tarasov, and A. Y. Zelinsky, “Status of the NSC KIPT Neutron Source”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 537-539. doi:10.18429/JACoW-ICALEPCS2017-TUPHA061
[n] H. Kwon, K. Lee, M. Chun, K. Chung, H. Kim, and M. Park, “Single Pass Acceleration Experiment Using Coaxial Cavity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH029, pp. 2512-2514.
[n] J. B. Flanz et al., “The MIT-Bates South Hall Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 34-37.
[n] M. Major et al., “Structural Investigation of Nitrogen-Doped Niobium for SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 581. doi:10.18429/JACoW-SRF2021-WEPFDV010
[n] E. B. Holzer et al., “Design of the Beam Loss Monitoring System for the LHC Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT012, pp. 2487-2489.
[n] A. V. Sy, A. J. Kimber, and J. Musson, “Development of an Ultra Fast RF Kicker for an ERL-based Electron Cooler”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper TUYAUD04, pp. 89-92.
[n] J. Xu, V. N. Aseev, B. Mustapha, and P. N. Ostroumov, “Simulations of High-Intensity Beams Using BG/P Supercomputer at ANL”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGB05, pp. 200-202.
[n] D. J. Dunning et al., “First Lasing of the ALICE IR-FEL at Daresbury Laboratory”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOOA2, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Schempp et al., “Performance of the DESY RFQs”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-14, pp. 73-75.
- Y. Li, Z. P. Li, W. B. Liu, and J. Peng, “XAL Applications Development for CSNS Transport Lines”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 98-100.
- Y. Adachi et al., “In-House Cyclotron and Radioisotopes Production System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-07, pp. 622-625.
- S. Cohen and S. R. Babel, “Digital Control Interface for Bipolar Corrector Power Supplies for LCLS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN112, pp. 428-430.
- M. Brandin et al., “Status of the Undulator System of the Seeded HGHG-FEL Test Bench at MAX-lab”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH050, pp. 122-125.
- C. T. Rogers and M. A. Cummings, “Characterisation of Cooling in the Muon Ionization Cooling Experiment”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1976-1978.
- K. Kümpel, H. Hoeltermann, H. Podlech, J. Storch, S. Altürk, and U. Ratzinger, “The LOEWE-3 RFQ project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR05, pp. 3485-3487.
- P. Braun, H. Podlech, J. Storch, K. Kümpel, and P. Mueller, “Preparation for the conditioning of the MYRRHA CH-Cavities at IAP”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR07, pp. 3491-3493.
- D. A. Goldberg and R. A. Rimmer, “Measurement and Identification of HOMs in RF Cavities”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P039, pp. 3001-3003.
- M. Uesaka et al., “Applications of X-band 950 keV and 3.95 MeV Linac X-ray Source for On-site Inspection”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR043, pp. 4071-4073.
- U. Amaldi, “The Importance of Particle Accelerators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOXE01, pp. 3-7.
- W. Lou, C. Mayes, and Y. Cai, “Two Dimensional Transient CSR Simulation in Julia”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA001, unpublished.
- S. M. Polozov, I. A. Ashanin, Yu. D. Kliuchevskaia, M. V. Lalayan, A. I. Pronikov, and V. I. Rashchikov, “Beam Dynamics Simulation Results in the 6 GeV Top-Up Injection Linac of the 4th Generation Light Source USSR”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 285-288.
- J. Resta-L??pez, J. R. Hunt, and C. P. Welsch, “Intra-beam Scattering Effects in ELENA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2458-2461.
- U. Amaldi et al., “LIBO - A 3 GHz Proton Linac Booster of 200 MeV for Cancer Treatment”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4098, pp. 633-635.
- O. Bezditko, I. M. Karnaukhov, A. Mytsykov, D. V. Tarasov, and A. Y. Zelinsky, “Status of the NSC KIPT Neutron Source”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 537-539.
- H. Kwon, K. Lee, M. Chun, K. Chung, H. Kim, and M. Park, “Single Pass Acceleration Experiment Using Coaxial Cavity”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH029, pp. 2512-2514.
- J. B. Flanz et al., “The MIT-Bates South Hall Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 34-37.
- M. Major et al., “Structural Investigation of Nitrogen-Doped Niobium for SRF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 581.
- E. B. Holzer et al., “Design of the Beam Loss Monitoring System for the LHC Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT012, pp. 2487-2489.
- A. V. Sy, A. J. Kimber, and J. Musson, “Development of an Ultra Fast RF Kicker for an ERL-based Electron Cooler”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper TUYAUD04, pp. 89-92.
- J. Xu, V. N. Aseev, B. Mustapha, and P. N. Ostroumov, “Simulations of High-Intensity Beams Using BG/P Supercomputer at ANL”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGB05, pp. 200-202.
- D. J. Dunning et al., “First Lasing of the ALICE IR-FEL at Daresbury Laboratory”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOOA2, pp. XX-XX.
Back to search