Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Cantono, T. Ceccotti, L. Fedeli, and A. Macchi, “2019 APS DPB Outstanding Doctoral Thesis Award - Relativistic Plasmonics in High Intensity Laser-Solid Interactions”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper THAHC1, unpublished.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2071-2074. doi:10.18429/JACoW-IPAC2019-TUPTS066
[n] R. Lambiase, “Overview of the Power Conversion Systems for the RHIC Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP004G, pp. 2311-2313.
[n] R. Losito et al., “Testing Material Properties with High Energy Beams in HiRadMat at CERN”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2C01, pp. 654-658.
[n] C. Zhang et al., “A 1-2 GHz stochastic cooling system for antiprotons and rare isotopes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1740-1743. doi:10.18429/JACoW-IPAC2023-TUPA184
[n] D. Dunning et al., “The UK XFEL conceptual design and options analysis: mid-term update”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 400-403. doi:10.18429/JACoW-IPAC2024-MOPG55
[n] G. Arduini et al., “Overview of LEP Operation in 1998”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP22, pp. 2996-2998.
[n] J. J. Ko et al., “X-ray Pinhole Camera in the Diagnostics Beamlime BL7B at PLS-II”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 519-522. doi:10.18429/JACoW-IBIC2018-WEPC17
[n] S. Nemesure et al., “Improved Alarm Tracking for Better Accountability”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP249, pp. 579-581.
[n] R. Veness, B. Goddard, L. Massidda, S. J. Mathot, and A. Presland, “Design of the LHC Beam Dump Entrance Window”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS123, pp. 1792-1794.
[n] B. Skoczen and J. Kulka, “Non-destructive Testing of Bus-bar Joints Powering LHC Superconducting Magnets, by Using Gamma Sources”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF021, pp. 1642-1644.
[n] H. G. Blosser, “Beam Quality Measurements and Focusing Grid Studies”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D06, pp. 203-207.
[n] J. David Schneider, “Operation of the Low-Energy Demonstration Accelerator: The Proton Injector for APT”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THCL2, pp. 503-507.
[n] R. D?Âlling, “Diagnostics of the PROSCAN beam lines”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM25, pp. XX-XX.
[n] A. Baartman and D. Kaltchev, “Runge-Kutta DA Integrator in Mathematica Language”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN004, pp. 3226-3228.
[n] M. T. F. Pivi et al., “Status of the Carbon Commissioning and Roadmap Projects of the MedAustron Ion Therapy Center Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3404-3407. doi:10.18429/JACoW-IPAC2019-THXXPLS1
[n] R. Assmann, J. B. Jeanneret, and D. Kaltchev, “STATUS OF ROBUSTNESS STUDIES FOR THE LHC COLLIMATION”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEAU05, pp. XX-XX.
[n] L. R. Evans and J. Gareyte, “Beam-Beam and Single Beam Effects in the SPS Proton-Antiproton Collider”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2397-2400.
[n] J. Chen and D. Zu, “Study on TESLA Cavity Shape”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1095-1098.
[n] D. L. Judd, “Session I Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A02, pp. 4-6.
[n] J. B. Kim, I. S. Ko, and H. Suk, “Reengineering and Refactoring Large-scale Scientific Programs with the Unified Process: A Case Study with OSIRIS PIC Program”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT085, pp. 2697-2699.
[n] X. Qiu, “Picosecond-Resolution `Slice' Emittance Measurement of Electron Bunches”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7C001, pp. 1971-1975.
[n] A. Asner, R. Holsinger, and C. Iselin, “The Computation of Poleface Winding Systems Yielding Independent Multipole Fields within the Aperture of Notably Alternating Gradient Synchrotron Magnets”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 703-708.
[n] M. V. Fazio and F. E. Brandeberry, “CW RF Operation of the FMIT RFQ”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2840-2843.
[n] B. Spaniol and W. C. Heraeus GmbH, “quot;Oligo-crystalinquot; Niobium / Large Grain Niobium Discs, Directly Cut from Ingot”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH163, pp. 0-3645.
[n] A. I. Ageev et al., “The IHEP Accelerating and Storage Complex - Status and Development”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 233-237.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Cantono, T. Ceccotti, L. Fedeli, and A. Macchi, “2019 APS DPB Outstanding Doctoral Thesis Award - Relativistic Plasmonics in High Intensity Laser-Solid Interactions”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper THAHC1, unpublished.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2071-2074.
- R. Lambiase, “Overview of the Power Conversion Systems for the RHIC Project”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP004G, pp. 2311-2313.
- R. Losito et al., “Testing Material Properties with High Energy Beams in HiRadMat at CERN”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO2C01, pp. 654-658.
- C. Zhang et al., “A 1-2 GHz stochastic cooling system for antiprotons and rare isotopes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA184, pp. 1740-1743.
- D. Dunning et al., “The UK XFEL conceptual design and options analysis: mid-term update”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG55, pp. 400-403.
- G. Arduini et al., “Overview of LEP Operation in 1998”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP22, pp. 2996-2998.
- J. J. Ko et al., “X-ray Pinhole Camera in the Diagnostics Beamlime BL7B at PLS-II”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 519-522.
- S. Nemesure et al., “Improved Alarm Tracking for Better Accountability”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP249, pp. 579-581.
- R. Veness, B. Goddard, L. Massidda, S. J. Mathot, and A. Presland, “Design of the LHC Beam Dump Entrance Window”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS123, pp. 1792-1794.
- B. Skoczen and J. Kulka, “Non-destructive Testing of Bus-bar Joints Powering LHC Superconducting Magnets, by Using Gamma Sources”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF021, pp. 1642-1644.
- H. G. Blosser, “Beam Quality Measurements and Focusing Grid Studies”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D06, pp. 203-207.
- J. David Schneider, “Operation of the Low-Energy Demonstration Accelerator: The Proton Injector for APT”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THCL2, pp. 503-507.
- R. D?Âlling, “Diagnostics of the PROSCAN beam lines”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM25, pp. XX-XX.
- A. Baartman and D. Kaltchev, “Runge-Kutta DA Integrator in Mathematica Language”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN004, pp. 3226-3228.
- M. T. F. Pivi et al., “Status of the Carbon Commissioning and Roadmap Projects of the MedAustron Ion Therapy Center Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3404-3407.
- R. Assmann, J. B. Jeanneret, and D. Kaltchev, “STATUS OF ROBUSTNESS STUDIES FOR THE LHC COLLIMATION”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEAU05, pp. XX-XX.
- L. R. Evans and J. Gareyte, “Beam-Beam and Single Beam Effects in the SPS Proton-Antiproton Collider”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2397-2400.
- J. Chen and D. Zu, “Study on TESLA Cavity Shape”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1095-1098.
- D. L. Judd, “Session I Introductory Comments”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A02, pp. 4-6.
- J. B. Kim, I. S. Ko, and H. Suk, “Reengineering and Refactoring Large-scale Scientific Programs with the Unified Process: A Case Study with OSIRIS PIC Program”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT085, pp. 2697-2699.
- X. Qiu, “Picosecond-Resolution `Slice' Emittance Measurement of Electron Bunches”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7C001, pp. 1971-1975.
- A. Asner, R. Holsinger, and C. Iselin, “The Computation of Poleface Winding Systems Yielding Independent Multipole Fields within the Aperture of Notably Alternating Gradient Synchrotron Magnets”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 703-708.
- M. V. Fazio and F. E. Brandeberry, “CW RF Operation of the FMIT RFQ”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2840-2843.
- B. Spaniol and W. C. Heraeus GmbH, “quot;Oligo-crystalinquot; Niobium / Large Grain Niobium Discs, Directly Cut from Ingot”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH163, pp. 0-3645.
- A. I. Ageev et al., “The IHEP Accelerating and Storage Complex - Status and Development”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 233-237.
Back to search