Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Modena, A. V. Aloev, H. Garcia, L. Gatignon, and R. Tomas, “Considerations for a QD0 with Hybrid Technology in ILC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1346-1349. doi:10.18429/JACoW-IPAC2014-TUPME006
[n] M. J. Ferreira, R. O. Ferraz, H. G. Filho, and M. B. Silva, “Design, Construction and Commissioning of a NEG Coated Wiggler Vacuum Chamber for the LNLS Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT044, pp. 2807-2808.
[n] J. Ko, B. Oh, and S. Shin, “Thermal Load Analysis and Benchmark Study for Beamline of Low Emittance Storage Ring”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM129, unpublished.
[n] J. J. Guo, Q. Gu, H. T. Hou, J. H. Tan, and M. Zhang, “Longitudinal Effects of Trapped Homs in Shanghai Coherent Light Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3872-3874. doi:10.18429/JACoW-IPAC2018-THPAL101
[n] O. R. Bagnato, R. O. Ferraz, M. J. Ferreira, F. A. Minuzzi, R. Picoli, and M. B. Silva, “LNLS Vacuum System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP073L, pp. 2518-2520.
[n] L. Yang, T. He, Y. He, A. H. Li, L. Lu, and C. C. Xing, “RF DESIGN OF AN 81.25 MHz BENT-VANE TYPE RFQ”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1015-1017. doi:10.18429/JACoW-IPAC2019-MOPTS072
[n] R. L. Cassel, G. C. Pappas, M. N. Nguyen, and J. E. DeLamare, “A Solid State Induction Modulator for SLAC NLC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP9, pp. 1494-1496.
[n] V. Variale et al., “First Test Results of a Residual Gas Beam Profile Monitor”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P053, pp. 2169-2170.
[n] M. Serluca, T. Friedrich, A. Jansson, and C. Plostinar, “The development of aggregation diagrams for high-level planning at the ESS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2305-2308. doi:10.18429/JACoW-IPAC2023-TUPM048
[n] T. C. King, J. C. Chang, S. H. Chang, J. R. Chen, F. Z. Hsiao, and H. C. Li, “Design of Cryogenic System for Several Super-Conducting Modules at National Synchrotron Radiation Research Center”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE039, pp. 2405-2407.
[n] G. Gallo et al., “Innovative Mechanical Solutions for the Design of the High Intensity Proton Injector for the European Spallation Source”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 111-113. doi:10.18429/JACoW-ECRIS2016-WEPP18
[n] F. Z. Hsiao et al., “The Pilot-Runs of the Helium Cryogenic System for the TLS Superconducting Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE038, pp. 2402-2404.
[n] B. N. Kosciuk et al., “Development of High Stability Supports for NSLS-II RF BPMs”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP012, pp. 3465-3467.
[n] Yu. A. Kubyshin et al., “Current Status of the 12 MeV UPC Race-Track Microtron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP112, pp. 2775-2777.
[n] R. J. Roussel and A. Hanuka, “Towards Hysteresis Aware Bayesian Regression and Optimization”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2159-2162. doi:10.18429/JACoW-IPAC2021-TUPAB289
[n] A. D. Tran, X. Gu, and Y. Hao, “RHIC Electron Beam Cooling Analysis Using Principle Component and Autoencoder Analysis”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 260-262. doi:10.18429/JACoW-NAPAC2022-MOPA89
[n] Y. B. Yan, Z. C. Chen, L. W. Lai, and Y. B. Leng, “Parameters Tracking and Fault Diagnosis base on NoSQL Database at SSRF”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 873-875. doi:10.18429/JACoW-ICALEPCS2015-WEPGF072
[n] A. D. Tran, Y. Hao, J. L. Martinez Marin, and B. Mustapha, “Relating Initial Distribution to Beam Loss on the Front End of a Heavy-Ion Linac Using Machine Learning”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 263-266. doi:10.18429/JACoW-NAPAC2022-MOPA90
[n] N. S. Ginzburg et al., “Experimental Observation of Generation of Superradiance Pulses in the Process of Backscattering of Pump Wave on the Intense Electron Bunch”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUOA003, pp. XX-XX.
[n] J. L. Conradie et al., “Progress With a New Radioisotope Production Facility and Construction of Radioactive Beam Facility at iThemba LABS”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 17-20. doi:10.18429/JACoW-CYCLOTRONS2019-MOB02
[n] J. Poole and C. Petit-Jean-Genaz, “JACoW, a Collaboration Serving the Accelerator Community”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THZCH03, pp. 249-252.
[n] F. Caspers, E. H. R. Gaxiola, T. Kroyer, S. S. Kurennoy, M. Timmins, and J. A. Uythoven, “A Retrofit Technique for Kicker Beam-coupling Impedance Reduction”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT008, pp. 1144-1146.
[n] J. K. Abraham and W. Duckitt, “Integration of EtherCAT Hardware Into the EPICS Based Distributed Control System at iThemba LABS”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 152-155. doi:10.18429/JACoW-CYCLOTRONS2019-TUP004
For LaTeX
Use Complete Form
For BibTeX
References
- M. Modena, A. V. Aloev, H. Garcia, L. Gatignon, and R. Tomas, “Considerations for a QD0 with Hybrid Technology in ILC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1346-1349.
- M. J. Ferreira, R. O. Ferraz, H. G. Filho, and M. B. Silva, “Design, Construction and Commissioning of a NEG Coated Wiggler Vacuum Chamber for the LNLS Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT044, pp. 2807-2808.
- J. Ko, B. Oh, and S. Shin, “Thermal Load Analysis and Benchmark Study for Beamline of Low Emittance Storage Ring”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM129, unpublished.
- J. J. Guo, Q. Gu, H. T. Hou, J. H. Tan, and M. Zhang, “Longitudinal Effects of Trapped Homs in Shanghai Coherent Light Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3872-3874.
- O. R. Bagnato, R. O. Ferraz, M. J. Ferreira, F. A. Minuzzi, R. Picoli, and M. B. Silva, “LNLS Vacuum System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP073L, pp. 2518-2520.
- L. Yang, T. He, Y. He, A. H. Li, L. Lu, and C. C. Xing, “RF DESIGN OF AN 81.25 MHz BENT-VANE TYPE RFQ”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1015-1017.
- R. L. Cassel, G. C. Pappas, M. N. Nguyen, and J. E. DeLamare, “A Solid State Induction Modulator for SLAC NLC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP9, pp. 1494-1496.
- V. Variale et al., “First Test Results of a Residual Gas Beam Profile Monitor”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P053, pp. 2169-2170.
- M. Serluca, T. Friedrich, A. Jansson, and C. Plostinar, “The development of aggregation diagrams for high-level planning at the ESS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM048, pp. 2305-2308.
- T. C. King, J. C. Chang, S. H. Chang, J. R. Chen, F. Z. Hsiao, and H. C. Li, “Design of Cryogenic System for Several Super-Conducting Modules at National Synchrotron Radiation Research Center”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE039, pp. 2405-2407.
- G. Gallo et al., “Innovative Mechanical Solutions for the Design of the High Intensity Proton Injector for the European Spallation Source”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 111-113.
- F. Z. Hsiao et al., “The Pilot-Runs of the Helium Cryogenic System for the TLS Superconducting Cavity”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE038, pp. 2402-2404.
- B. N. Kosciuk et al., “Development of High Stability Supports for NSLS-II RF BPMs”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP012, pp. 3465-3467.
- Yu. A. Kubyshin et al., “Current Status of the 12 MeV UPC Race-Track Microtron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP112, pp. 2775-2777.
- R. J. Roussel and A. Hanuka, “Towards Hysteresis Aware Bayesian Regression and Optimization”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2159-2162.
- A. D. Tran, X. Gu, and Y. Hao, “RHIC Electron Beam Cooling Analysis Using Principle Component and Autoencoder Analysis”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 260-262.
- Y. B. Yan, Z. C. Chen, L. W. Lai, and Y. B. Leng, “Parameters Tracking and Fault Diagnosis base on NoSQL Database at SSRF”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 873-875.
- A. D. Tran, Y. Hao, J. L. Martinez Marin, and B. Mustapha, “Relating Initial Distribution to Beam Loss on the Front End of a Heavy-Ion Linac Using Machine Learning”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 263-266.
- N. S. Ginzburg et al., “Experimental Observation of Generation of Superradiance Pulses in the Process of Backscattering of Pump Wave on the Intense Electron Bunch”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUOA003, pp. XX-XX.
- J. L. Conradie et al., “Progress With a New Radioisotope Production Facility and Construction of Radioactive Beam Facility at iThemba LABS”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 17-20.
- J. Poole and C. Petit-Jean-Genaz, “JACoW, a Collaboration Serving the Accelerator Community”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THZCH03, pp. 249-252.
- F. Caspers, E. H. R. Gaxiola, T. Kroyer, S. S. Kurennoy, M. Timmins, and J. A. Uythoven, “A Retrofit Technique for Kicker Beam-coupling Impedance Reduction”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT008, pp. 1144-1146.
- J. K. Abraham and W. Duckitt, “Integration of EtherCAT Hardware Into the EPICS Based Distributed Control System at iThemba LABS”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 152-155.
Back to search