Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Wolski, “A New Lattice Design for the NLC Positron Pre-damping Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI030, pp. 521-523.
[n] N. Catalan-Lasheras, “Collimation Optimization in High Intensity Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPB001, pp. 424-428.
[n] R. A. Jameson, “Introduction to RFQ Session”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0002, pp. 49-52.
[n] H. Hahn, “Matrix Solution of Coupling Impedance in Multi-Layer Circular Cylindrical Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP082, pp. 3395-3397.
[n] M. L. Good, “The Fixed-Field, Rotating-Magnet Synchrotron or: Why Pluse?”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1061-1065.
[n] D. Sagan, “Detection of Coupling Elements in CESR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP5, pp. 2966-2968.
[n] H. Danared, “An Adiabatic Electron Gun for the CRYRING Electron Cooler”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1033-1035.
[n] R. Bartolini, M. Borland, and K. C. Harkay, “Plans for the Generation of Short Radiation Pulses at the Diamond Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH054, pp. 160-162.
[n] D. Still, I. Kourbanis, and D. Capista, “Tune Measurement Methods in the Fermilab Main Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P043, pp. 2061-2063.
[n] B. Rusnak, “High Intensity Proton Linacs”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95J01, pp. 752-752.
[n] D. A. Phelps and S. Somerstein, “Precision Intense Particle Beam Accelerators Using In-Situ Tuning Techniques”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3424-3427.
[n] S. Di Mitri, “How to Obtain High Quality Electron Bunches in the Presence of Normal Conducting LINAC Wake Fields”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THBAU03, pp. 537-544.
[n] T. H. Martin, “The Hydra Electron Beam Generator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 289-294.
[n] S. Yu, “Review of New Developments in the Field of Induction Accelerators (Electrons and Ions)”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TH103, pp. 597-604.
[n] J. Guo and S. G. Tantawi, “Active RF Pulse Compression Using Electrically Controlled Semiconductor Switches”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS040, pp. 2433-2435.
[n] D. A. Judd, L. J. Kettle, H. Menown, B. P. Newton, N. S. Nicholls, and R. Sheldrake, “Modern Thyratron Crowbar Protection Systems”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1600-1603.
[n] Y. Chen, S. Fu, Z. Huang, and Z. Zhang, “Nonlinear Space Charge Effect of Gaussian Type Bunched Beam in Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ25, pp. 3343-3345.
[n] Takashi Baba, “DESIGN OF A COMPACT FFAG ACCELERATOR WITH SPIRAL SECTOR MAGNET”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P13, pp. XX-XX.
[n] R. J. Bakker, “Status and Commissioning-Results of BESSY II”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUCL3, pp. 197-199.
[n] H. Tanaka, “HYBRID ACCELERATOR USING AN FFAG INJECTION SCHEME”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19C6, pp. XX-XX.
[n] T. Ohshima, S. Matsubara, H. Maesaka, and Y. Otake, “Variation of Beam Arrival Timing at SACLA”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD36, pp. 317-320.
[n] J.Hill, “A 2nd Generation Network Distributed Application Programming Interface for EPICS”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_096.
[n] Y. Zhang and J. Qiang, “Simulation Studies of Beam-Beam Effects of a Ring-Ring Electron-Ion Collider Based on CEBAF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP067, pp. 2653-2655.
[n] A. Walker and W. J. Gallagher, “Mechanical Limitations in High Average Power Linacs”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3125-3128.
[n] S. Belomestnykh, “Overview of input power coupler developments,pulsed and CW”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WE305, pp. XX-XX.
[n] V. I. Zaitsev, E. V. Grabovsky, A. V. Kartashov, and G. M. Oleinik, “The Present Status of the Control System for the ANGARA-5 Fusion Facility”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP077, pp. XX-XX.
[n] D. C. Nguyen, W. B. Colson, and H. Freund, “A Scalloped Electron Beam Free-Electron Laser”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THAAU03, pp. 509-511.
[n] M. W. Poole and V. P. Suller, “Proposals for New UK Light Sources”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 621-624.
[n] Roberto Strangis And Carlos Gonzalez Lepera CYCLOTOPE, Houston, TX 77054, USA, “Reliable Fluorine-18 [18f-] Production At High Beam Power”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 251-253.
[n] W. B. Herrmannsfeldt, “The SLAC Recirculating Linear Accelerator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 910-914.
[n] O. J. Luiten and M. J. Van der Wiel, “Compact, Ultra-Bright Coherent Transition Radiation Terahertz Source”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP052, pp. XX-XX.
[n] C. S. Hopper, J. R. Delayen, and H. Park, “Development and Testing of a 325 MHz beta0 = 0.82 Single-Spoke Cavity”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB071, pp. 744-746.
[n] J. D. Schneider, “Overview of High-power CW Proton Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THXF203, pp. 118-122.
[n] S. Yamaguchi, “Design of Input and Output Couplers for Linear Accelerator Structures”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP11, pp. 346-348.
[n] W. S. Chapman, “Phase Stability Studies for the ING Linac”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 212-214.
[n] M. A. Fraser and R. Calaga, “Status of the Design Study for 10 MHz Post-accelerated Radioactive Ion Beams at HIE-ISOLDE”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP030, pp. 901-904.
[n] V. K. B. Olsen, J. J. Batkiewicz, S. Deghaye, S. J. Gessner, E. Gschwendtner, and P. Muggli, “Data Acquisition and Controls Integration of the AWAKE Experiment at CERN”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1833-1835. doi:10.18429/JACoW-IPAC2017-TUPIK061
[n] M. Fouaidy, “Low Temperature Thermal Conductivity of Niobium and Materials for SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 144-147. doi:10.18429/JACoW-SRF2019-MOP040
[n] C. E. Mayes, “Cornell ERL Tolerance Simulations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP067, pp. 1603-1605.
[n] O. Karamyshev, “Concept of 15 Mev Cyclotron for Medical Isotopes Production”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 233-236. doi:10.18429/JACoW-CYCLOTRONS2019-TUP033
[n] H. Danared, “Numerical Calculations of the Electron Cooling Drag Force in a Magnetic Field”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B16, pp. 1238-1240.
[n] M. Munoz, “Linear Lattice for the LSB Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP135G, pp. 712-714.
[n] F. Ciocci, “Hybrid Undulator Terminations”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1353-1356.
[n] R. Scrivens, “Proton and Ion Sources for High Intensity Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUYLH01, pp. 103-107.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Wolski, “A New Lattice Design for the NLC Positron Pre-damping Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI030, pp. 521-523.
- N. Catalan-Lasheras, “Collimation Optimization in High Intensity Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOPB001, pp. 424-428.
- R. A. Jameson, “Introduction to RFQ Session”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOB0002, pp. 49-52.
- H. Hahn, “Matrix Solution of Coupling Impedance in Multi-Layer Circular Cylindrical Structures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP082, pp. 3395-3397.
- M. L. Good, “The Fixed-Field, Rotating-Magnet Synchrotron or: Why Pluse?”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1061-1065.
- D. Sagan, “Detection of Coupling Elements in CESR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP5, pp. 2966-2968.
- H. Danared, “An Adiabatic Electron Gun for the CRYRING Electron Cooler”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1033-1035.
- R. Bartolini, M. Borland, and K. C. Harkay, “Plans for the Generation of Short Radiation Pulses at the Diamond Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH054, pp. 160-162.
- D. Still, I. Kourbanis, and D. Capista, “Tune Measurement Methods in the Fermilab Main Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P043, pp. 2061-2063.
- B. Rusnak, “High Intensity Proton Linacs”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95J01, pp. 752-752.
- D. A. Phelps and S. Somerstein, “Precision Intense Particle Beam Accelerators Using In-Situ Tuning Techniques”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3424-3427.
- S. Di Mitri, “How to Obtain High Quality Electron Bunches in the Presence of Normal Conducting LINAC Wake Fields”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THBAU03, pp. 537-544.
- T. H. Martin, “The Hydra Electron Beam Generator”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 289-294.
- S. Yu, “Review of New Developments in the Field of Induction Accelerators (Electrons and Ions)”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TH103, pp. 597-604.
- J. Guo and S. G. Tantawi, “Active RF Pulse Compression Using Electrically Controlled Semiconductor Switches”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS040, pp. 2433-2435.
- D. A. Judd, L. J. Kettle, H. Menown, B. P. Newton, N. S. Nicholls, and R. Sheldrake, “Modern Thyratron Crowbar Protection Systems”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1600-1603.
- Y. Chen, S. Fu, Z. Huang, and Z. Zhang, “Nonlinear Space Charge Effect of Gaussian Type Bunched Beam in Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ25, pp. 3343-3345.
- Takashi Baba, “DESIGN OF A COMPACT FFAG ACCELERATOR WITH SPIRAL SECTOR MAGNET”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P13, pp. XX-XX.
- R. J. Bakker, “Status and Commissioning-Results of BESSY II”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUCL3, pp. 197-199.
- H. Tanaka, “HYBRID ACCELERATOR USING AN FFAG INJECTION SCHEME”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19C6, pp. XX-XX.
- T. Ohshima, S. Matsubara, H. Maesaka, and Y. Otake, “Variation of Beam Arrival Timing at SACLA”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD36, pp. 317-320.
- J.Hill, “A 2nd Generation Network Distributed Application Programming Interface for EPICS”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_096.
- Y. Zhang and J. Qiang, “Simulation Studies of Beam-Beam Effects of a Ring-Ring Electron-Ion Collider Based on CEBAF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP067, pp. 2653-2655.
- A. Walker and W. J. Gallagher, “Mechanical Limitations in High Average Power Linacs”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3125-3128.
- S. Belomestnykh, “Overview of input power coupler developments,pulsed and CW”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WE305, pp. XX-XX.
- V. I. Zaitsev, E. V. Grabovsky, A. V. Kartashov, and G. M. Oleinik, “The Present Status of the Control System for the ANGARA-5 Fusion Facility”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP077, pp. XX-XX.
- D. C. Nguyen, W. B. Colson, and H. Freund, “A Scalloped Electron Beam Free-Electron Laser”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THAAU03, pp. 509-511.
- M. W. Poole and V. P. Suller, “Proposals for New UK Light Sources”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 621-624.
- Roberto Strangis And Carlos Gonzalez Lepera CYCLOTOPE, Houston, TX 77054, USA, “Reliable Fluorine-18 [18f-] Production At High Beam Power”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 251-253.
- W. B. Herrmannsfeldt, “The SLAC Recirculating Linear Accelerator”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 910-914.
- O. J. Luiten and M. J. Van der Wiel, “Compact, Ultra-Bright Coherent Transition Radiation Terahertz Source”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP052, pp. XX-XX.
- C. S. Hopper, J. R. Delayen, and H. Park, “Development and Testing of a 325 MHz beta0 = 0.82 Single-Spoke Cavity”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB071, pp. 744-746.
- J. D. Schneider, “Overview of High-power CW Proton Accelerators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THXF203, pp. 118-122.
- S. Yamaguchi, “Design of Input and Output Couplers for Linear Accelerator Structures”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP11, pp. 346-348.
- W. S. Chapman, “Phase Stability Studies for the ING Linac”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 212-214.
- M. A. Fraser and R. Calaga, “Status of the Design Study for 10 MHz Post-accelerated Radioactive Ion Beams at HIE-ISOLDE”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP030, pp. 901-904.
- V. K. B. Olsen, J. J. Batkiewicz, S. Deghaye, S. J. Gessner, E. Gschwendtner, and P. Muggli, “Data Acquisition and Controls Integration of the AWAKE Experiment at CERN”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1833-1835.
- M. Fouaidy, “Low Temperature Thermal Conductivity of Niobium and Materials for SRF Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 144-147.
- C. E. Mayes, “Cornell ERL Tolerance Simulations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP067, pp. 1603-1605.
- O. Karamyshev, “Concept of 15 Mev Cyclotron for Medical Isotopes Production”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 233-236.
- H. Danared, “Numerical Calculations of the Electron Cooling Drag Force in a Magnetic Field”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1B16, pp. 1238-1240.
- M. Munoz, “Linear Lattice for the LSB Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP135G, pp. 712-714.
- F. Ciocci, “Hybrid Undulator Terminations”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1353-1356.
- R. Scrivens, “Proton and Ion Sources for High Intensity Accelerators”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUYLH01, pp. 103-107.
Back to search