Favourites
For Word
[n] G. Burt et al., “Project-Based Cooperative Learning in Accelerator Science and Technology Education”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2458-2461. doi:10.18429/JACoW-IPAC2017-TUPVA154
[n] H. S. Suh et al., “Design and Test of Dipole and Quadrupole Magnets for PAL-XFEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1271-1273. doi:10.18429/JACoW-IPAC2014-TUPRO098
[n] Y. Roblin, “Calibrating Transport Lines using LOCO Techniques”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC048, pp. 2118-2120.
[n] A. Hocker, E. Cullerton, B. M. Hanna, W. Schappert, and A. I. Sukhanov, “RF Tests of Dressed 325 MHz Single-Spoke Resonators at 2 K”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP055, pp. 180-182.
[n] B. L. Militsyn et al., “Status of the Injection System of the CLARA FEL Test Facility”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 174-177. doi:10.18429/JACoW-LINAC2016-MOPLR016
[n] R. P. Fliller et al., “Design of the NSLS-II Top Off Safety System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1986-1988. doi:10.18429/JACoW-IPAC2015-TUPHA010
[n] K. Saito, “SCRF Test Facilities toward the ILC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOXPA02, pp. 5-9.
[n] E. B. Blum et al., “NSLS-II Injector Commissioning and Initial Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1944-1946. doi:10.18429/JACoW-IPAC2015-TUPMA050
[n] F. A. Nezrick, “A Monoenergetic Neutrino Beam Using Current-Sheet Focusing Elements”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 759-761.
[n] A. Giribono et al., “ELI-NP GBS Status”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 880-883. doi:10.18429/JACoW-IPAC2017-MOPVA016
[n] M. M. Maggiore, A. M. Porcellato, and S. Stark, “Study of the RFQ Beam Cooler for SPES project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD026, pp. 1467-1469.
[n] A. V. Smirnov et al., “Characterization of a Sub-THz Radiation Source Based on a 3 MeV Electron Beam and Future Plans”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1892-1894. doi:10.18429/JACoW-IPAC2016-TUPOW054
[n] K. B. Beard et al., “Recent Progress Toward a Muon Recirculating Linear Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD008, pp. 1422-1424.
[n] P. N. Juranic et al., “PALM Concepts and Considerations”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 848-851. doi:10.18429/JACoW-IBIC2016-THAL01
[n] G. Burt et al., “A Transverse Deflecting Cavity for the Measurement of Short Low Energy Bunches at EBTF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC026, pp. 3335-3337.
[n] G. Gatti, L. Cultrera, J. Moody, P. Musumeci, A. Perrone, and F. Tazzioli, “Power Tests of a PLD Film Mg Photo-cathode in a RF Gun”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN037, pp. 995-997.
[n] S. Gayadeen, S. Duncan, C. Christou, M. T. Heron, and J. Rowland, “Diamond Light Source Booster Fast Orbit Feedback System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS001, pp. 160-163.
[n] K. Ohmi and D. Zhou, “Study of Electron Cloud Effects in SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1597-1599. doi:10.18429/JACoW-IPAC2014-TUPRI020
[n] M. Rizzi, G. Corniani, A. Matheisen, and P. Michelato, “Comments on Electropolishing at Ettore Zanon SpA at the End of EXFEL Production”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB102, pp. 394-398.
[n] A. Bertarelli et al., “High Energy Tests of Advanced Materials for Beam Intercepting Devices at CERN HiRadMat Facility”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP240, pp. 136-140.
[n] Y. Zhang, K. Ohmi, D. Zhou, and D. N. Shatilov, “Beam-beam Simulation Study for CEPC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3763-3765. doi:10.18429/JACoW-IPAC2014-THPRI003
For LaTeX
Use Complete Form
For BibTeX
References
- G. Burt et al., “Project-Based Cooperative Learning in Accelerator Science and Technology Education”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2458-2461.
- H. S. Suh et al., “Design and Test of Dipole and Quadrupole Magnets for PAL-XFEL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1271-1273.
- Y. Roblin, “Calibrating Transport Lines using LOCO Techniques”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC048, pp. 2118-2120.
- A. Hocker, E. Cullerton, B. M. Hanna, W. Schappert, and A. I. Sukhanov, “RF Tests of Dressed 325 MHz Single-Spoke Resonators at 2 K”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP055, pp. 180-182.
- B. L. Militsyn et al., “Status of the Injection System of the CLARA FEL Test Facility”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 174-177.
- R. P. Fliller et al., “Design of the NSLS-II Top Off Safety System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1986-1988.
- K. Saito, “SCRF Test Facilities toward the ILC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOXPA02, pp. 5-9.
- E. B. Blum et al., “NSLS-II Injector Commissioning and Initial Operation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1944-1946.
- F. A. Nezrick, “A Monoenergetic Neutrino Beam Using Current-Sheet Focusing Elements”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 759-761.
- A. Giribono et al., “ELI-NP GBS Status”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 880-883.
- M. M. Maggiore, A. M. Porcellato, and S. Stark, “Study of the RFQ Beam Cooler for SPES project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD026, pp. 1467-1469.
- A. V. Smirnov et al., “Characterization of a Sub-THz Radiation Source Based on a 3 MeV Electron Beam and Future Plans”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1892-1894.
- K. B. Beard et al., “Recent Progress Toward a Muon Recirculating Linear Accelerator”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD008, pp. 1422-1424.
- P. N. Juranic et al., “PALM Concepts and Considerations”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 848-851.
- G. Burt et al., “A Transverse Deflecting Cavity for the Measurement of Short Low Energy Bunches at EBTF”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC026, pp. 3335-3337.
- G. Gatti, L. Cultrera, J. Moody, P. Musumeci, A. Perrone, and F. Tazzioli, “Power Tests of a PLD Film Mg Photo-cathode in a RF Gun”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN037, pp. 995-997.
- S. Gayadeen, S. Duncan, C. Christou, M. T. Heron, and J. Rowland, “Diamond Light Source Booster Fast Orbit Feedback System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS001, pp. 160-163.
- K. Ohmi and D. Zhou, “Study of Electron Cloud Effects in SuperKEKB”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1597-1599.
- M. Rizzi, G. Corniani, A. Matheisen, and P. Michelato, “Comments on Electropolishing at Ettore Zanon SpA at the End of EXFEL Production”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB102, pp. 394-398.
- A. Bertarelli et al., “High Energy Tests of Advanced Materials for Beam Intercepting Devices at CERN HiRadMat Facility”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP240, pp. 136-140.
- Y. Zhang, K. Ohmi, D. Zhou, and D. N. Shatilov, “Beam-beam Simulation Study for CEPC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3763-3765.
Back to search